Struct aws_sdk_iam::input::SimulatePrincipalPolicyInput[−][src]

#[non_exhaustive]pub struct SimulatePrincipalPolicyInput {
    pub policy_source_arn: Option<String>,
    pub policy_input_list: Option<Vec<String>>,
    pub permissions_boundary_policy_input_list: Option<Vec<String>>,
    pub action_names: Option<Vec<String>>,
    pub resource_arns: Option<Vec<String>>,
    pub resource_policy: Option<String>,
    pub resource_owner: Option<String>,
    pub caller_arn: Option<String>,
    pub context_entries: Option<Vec<ContextEntry>>,
    pub resource_handling_option: Option<String>,
    pub max_items: Option<i32>,
    pub marker: Option<String>,
}

Fields (Non-exhaustive)

This struct is marked as non-exhaustive

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

policy_source_arn: Option<String>

The Amazon Resource Name (ARN) of a user, group, or role whose policies you want to include in the simulation. If you specify a user, group, or role, the simulation includes all policies that are associated with that entity. If you specify a user, the simulation also includes all policies that are attached to any groups the user belongs to.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

policy_input_list: Option<Vec<String>>

An optional list of additional policy documents to include in the simulation. Each document is specified as a string containing the complete, valid JSON text of an IAM policy.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range
The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)
The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

permissions_boundary_policy_input_list: Option<Vec<String>>

The IAM permissions boundary policy to simulate. The permissions boundary sets the maximum permissions that the entity can have. You can input only one permissions boundary when you pass a policy to this operation. An IAM entity can only have one permissions boundary in effect at a time. For example, if a permissions boundary is attached to an entity and you pass in a different permissions boundary policy using this parameter, then the new permissions boundary policy is used for the simulation. For more information about permissions boundaries, see Permissions boundaries for IAM entities in the IAM User Guide. The policy input is specified as a string containing the complete, valid JSON text of a permissions boundary policy.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range
The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)
The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

action_names: Option<Vec<String>>

A list of names of API operations to evaluate in the simulation. Each operation is evaluated for each resource. Each operation must include the service identifier, such as iam:CreateUser.

resource_arns: Option<Vec<String>>

A list of ARNs of Amazon Web Services resources to include in the simulation. If this parameter is not provided, then the value defaults to * (all resources). Each API in the ActionNames parameter is evaluated for each resource in this list. The simulation determines the access result (allowed or denied) of each combination and reports it in the response. You can simulate resources that don't exist in your account.

The simulation does not automatically retrieve policies for the specified resources. If you want to include a resource policy in the simulation, then you must include the policy as a string in the ResourcePolicy parameter.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

resource_policy: Option<String>

A resource-based policy to include in the simulation provided as a string. Each resource in the simulation is treated as if it had this policy attached. You can include only one resource-based policy in a simulation.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range
The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)
The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

resource_owner: Option<String>

An Amazon Web Services account ID that specifies the owner of any simulated resource that does not identify its owner in the resource ARN. Examples of resource ARNs include an S3 bucket or object. If ResourceOwner is specified, it is also used as the account owner of any ResourcePolicy included in the simulation. If the ResourceOwner parameter is not specified, then the owner of the resources and the resource policy defaults to the account of the identity provided in CallerArn. This parameter is required only if you specify a resource-based policy and account that owns the resource is different from the account that owns the simulated calling user CallerArn.

caller_arn: Option<String>

The ARN of the IAM user that you want to specify as the simulated caller of the API operations. If you do not specify a CallerArn, it defaults to the ARN of the user that you specify in PolicySourceArn, if you specified a user. If you include both a PolicySourceArn (for example, arn:aws:iam::123456789012:user/David) and a CallerArn (for example, arn:aws:iam::123456789012:user/Bob), the result is that you simulate calling the API operations as Bob, as if Bob had David's policies.

You can specify only the ARN of an IAM user. You cannot specify the ARN of an assumed role, federated user, or a service principal.

CallerArn is required if you include a ResourcePolicy and the PolicySourceArn is not the ARN for an IAM user. This is required so that the resource-based policy's Principal element has a value to use in evaluating the policy.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

context_entries: Option<Vec<ContextEntry>>

A list of context keys and corresponding values for the simulation to use. Whenever a context key is evaluated in one of the simulated IAM permissions policies, the corresponding value is supplied.

resource_handling_option: Option<String>

Specifies the type of simulation to run. Different API operations that support resource-based policies require different combinations of resources. By specifying the type of simulation to run, you enable the policy simulator to enforce the presence of the required resources to ensure reliable simulation results. If your simulation does not match one of the following scenarios, then you can omit this parameter. The following list shows each of the supported scenario values and the resources that you must define to run the simulation.

Each of the EC2 scenarios requires that you specify instance, image, and security group resources. If your scenario includes an EBS volume, then you must specify that volume as a resource. If the EC2 scenario includes VPC, then you must supply the network interface resource. If it includes an IP subnet, then you must specify the subnet resource. For more information on the EC2 scenario options, see Supported platforms in the Amazon EC2 User Guide.

EC2-Classic-InstanceStore

instance, image, security group
EC2-Classic-EBS

instance, image, security group, volume
EC2-VPC-InstanceStore

instance, image, security group, network interface
EC2-VPC-InstanceStore-Subnet

instance, image, security group, network interface, subnet
EC2-VPC-EBS

instance, image, security group, network interface, volume
EC2-VPC-EBS-Subnet

instance, image, security group, network interface, subnet, volume

max_items: Option<i32>

Use this only when paginating results to indicate the maximum number of items you want in the response. If additional items exist beyond the maximum you specify, the IsTruncated response element is true.

If you do not include this parameter, the number of items defaults to 100. Note that IAM might return fewer results, even when there are more results available. In that case, the IsTruncated response element returns true, and Marker contains a value to include in the subsequent call that tells the service where to continue from.

marker: Option<String>

Use this parameter only when paginating results and only after you receive a response indicating that the results are truncated. Set it to the value of the Marker element in the response that you received to indicate where the next call should start.

Struct aws_sdk_iam::input::SimulatePrincipalPolicyInput[−][src]

Fields (Non-exhaustive)

Implementations

impl SimulatePrincipalPolicyInput

pub async fn make_operation( &self, _config: &Config) -> Result<Operation<SimulatePrincipalPolicy, AwsErrorRetryPolicy>, BuildError>

pub fn builder() -> Builder

impl SimulatePrincipalPolicyInput

pub fn policy_source_arn(&self) -> Option<&str>

pub fn policy_input_list(&self) -> Option<&[String]>

pub fn permissions_boundary_policy_input_list(&self) -> Option<&[String]>

pub fn action_names(&self) -> Option<&[String]>

pub fn resource_arns(&self) -> Option<&[String]>

pub fn resource_policy(&self) -> Option<&str>

pub fn resource_owner(&self) -> Option<&str>

pub fn caller_arn(&self) -> Option<&str>

pub fn context_entries(&self) -> Option<&[ContextEntry]>

pub fn resource_handling_option(&self) -> Option<&str>

pub fn max_items(&self) -> Option<i32>

pub fn marker(&self) -> Option<&str>

Trait Implementations

impl Clone for SimulatePrincipalPolicyInput

fn clone(&self) -> SimulatePrincipalPolicyInput

fn clone_from(&mut self, source: &Self)

impl Debug for SimulatePrincipalPolicyInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl PartialEq<SimulatePrincipalPolicyInput> for SimulatePrincipalPolicyInput

fn eq(&self, other: &SimulatePrincipalPolicyInput) -> bool

fn ne(&self, other: &SimulatePrincipalPolicyInput) -> bool

impl StructuralPartialEq for SimulatePrincipalPolicyInput

Auto Trait Implementations

impl RefUnwindSafe for SimulatePrincipalPolicyInput

impl Send for SimulatePrincipalPolicyInput

impl Sync for SimulatePrincipalPolicyInput

impl Unpin for SimulatePrincipalPolicyInput

impl UnwindSafe for SimulatePrincipalPolicyInput

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

pub fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

pub fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for T where U: From<T>,

pub fn into(self) -> U

impl<T> ToOwned for T where T: Clone,

type Owned = T

pub fn to_owned(&self) -> T

pub fn clone_into(&self, target: &mut T)

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for T where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where S: Into<Dispatch>,

fn with_current_subscriber(self) -> WithDispatch<Self>

pub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<SimulatePrincipalPolicy, AwsErrorRetryPolicy>, BuildError>

pub fn policy_input_list(&self) -> Option<&[String ]>

pub fn permissions_boundary_policy_input_list(&self) -> Option<&[String ]>

pub fn action_names(&self) -> Option<&[String ]>

pub fn resource_arns(&self) -> Option<&[String ]>

pub fn context_entries(&self) -> Option<&[ContextEntry ]>

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T> ToOwned for T where
T: Clone,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,