Struct aws_sdk_iam::client::fluent_builders::SimulatePrincipalPolicy

pub struct SimulatePrincipalPolicy { /* private fields */ }

Fluent builder constructing a request to SimulatePrincipalPolicy.

Simulate how a set of IAM policies attached to an IAM entity works with a list of API operations and Amazon Web Services resources to determine the policies' effective permissions. The entity can be an IAM user, group, or role. If you specify a user, then the simulation also includes all of the policies that are attached to groups that the user belongs to. You can simulate resources that don't exist in your account.

You can optionally include a list of one or more additional policies specified as strings to include in the simulation. If you want to simulate only policies specified as strings, use SimulateCustomPolicy instead.

You can also optionally include one resource-based policy to be evaluated with each of the resources included in the simulation.

The simulation does not perform the API operations; it only checks the authorization to determine if the simulated policies allow or deny the operations.

Note: This operation discloses information about the permissions granted to other users. If you do not want users to see other user's permissions, then consider allowing them to use SimulateCustomPolicy instead.

Context keys are variables maintained by Amazon Web Services and its services that provide details about the context of an API query request. You can use the Condition element of an IAM policy to evaluate context keys. To get the list of context keys that the policies require for correct simulation, use GetContextKeysForPrincipalPolicy.

If the output is long, you can use the MaxItems and Marker parameters to paginate the results.

For more information about using the policy simulator, see Testing IAM policies with the IAM policy simulator in the IAM User Guide.

Implementations

impl SimulatePrincipalPolicy

pub async fn send(
    self
) -> Result<SimulatePrincipalPolicyOutput, SdkError<SimulatePrincipalPolicyError>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn into_paginator(self) -> SimulatePrincipalPolicyPaginator

Create a paginator for this request

Paginators are used by calling send().await which returns a Stream.

pub fn policy_source_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of a user, group, or role whose policies you want to include in the simulation. If you specify a user, group, or role, the simulation includes all policies that are associated with that entity. If you specify a user, the simulation also includes all policies that are attached to any groups the user belongs to.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

pub fn set_policy_source_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of a user, group, or role whose policies you want to include in the simulation. If you specify a user, group, or role, the simulation includes all policies that are associated with that entity. If you specify a user, the simulation also includes all policies that are attached to any groups the user belongs to.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

pub fn policy_input_list(self, input: impl Into<String>) -> Self

Appends an item to PolicyInputList.

To override the contents of this collection use set_policy_input_list.

An optional list of additional policy documents to include in the simulation. Each document is specified as a string containing the complete, valid JSON text of an IAM policy.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn set_policy_input_list(self, input: Option<Vec<String>>) -> Self

An optional list of additional policy documents to include in the simulation. Each document is specified as a string containing the complete, valid JSON text of an IAM policy.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn permissions_boundary_policy_input_list(
    self,
    input: impl Into<String>
) -> Self

Appends an item to PermissionsBoundaryPolicyInputList.

To override the contents of this collection use set_permissions_boundary_policy_input_list.

The IAM permissions boundary policy to simulate. The permissions boundary sets the maximum permissions that the entity can have. You can input only one permissions boundary when you pass a policy to this operation. An IAM entity can only have one permissions boundary in effect at a time. For example, if a permissions boundary is attached to an entity and you pass in a different permissions boundary policy using this parameter, then the new permissions boundary policy is used for the simulation. For more information about permissions boundaries, see Permissions boundaries for IAM entities in the IAM User Guide. The policy input is specified as a string containing the complete, valid JSON text of a permissions boundary policy.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn set_permissions_boundary_policy_input_list(
    self,
    input: Option<Vec<String>>
) -> Self

The IAM permissions boundary policy to simulate. The permissions boundary sets the maximum permissions that the entity can have. You can input only one permissions boundary when you pass a policy to this operation. An IAM entity can only have one permissions boundary in effect at a time. For example, if a permissions boundary is attached to an entity and you pass in a different permissions boundary policy using this parameter, then the new permissions boundary policy is used for the simulation. For more information about permissions boundaries, see Permissions boundaries for IAM entities in the IAM User Guide. The policy input is specified as a string containing the complete, valid JSON text of a permissions boundary policy.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn action_names(self, input: impl Into<String>) -> Self

Appends an item to ActionNames.

To override the contents of this collection use set_action_names.

A list of names of API operations to evaluate in the simulation. Each operation is evaluated for each resource. Each operation must include the service identifier, such as iam:CreateUser.

pub fn set_action_names(self, input: Option<Vec<String>>) -> Self

A list of names of API operations to evaluate in the simulation. Each operation is evaluated for each resource. Each operation must include the service identifier, such as iam:CreateUser.

pub fn resource_arns(self, input: impl Into<String>) -> Self

Appends an item to ResourceArns.

To override the contents of this collection use set_resource_arns.

A list of ARNs of Amazon Web Services resources to include in the simulation. If this parameter is not provided, then the value defaults to * (all resources). Each API in the ActionNames parameter is evaluated for each resource in this list. The simulation determines the access result (allowed or denied) of each combination and reports it in the response. You can simulate resources that don't exist in your account.

The simulation does not automatically retrieve policies for the specified resources. If you want to include a resource policy in the simulation, then you must include the policy as a string in the ResourcePolicy parameter.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

pub fn set_resource_arns(self, input: Option<Vec<String>>) -> Self

A list of ARNs of Amazon Web Services resources to include in the simulation. If this parameter is not provided, then the value defaults to * (all resources). Each API in the ActionNames parameter is evaluated for each resource in this list. The simulation determines the access result (allowed or denied) of each combination and reports it in the response. You can simulate resources that don't exist in your account.

The simulation does not automatically retrieve policies for the specified resources. If you want to include a resource policy in the simulation, then you must include the policy as a string in the ResourcePolicy parameter.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

pub fn resource_policy(self, input: impl Into<String>) -> Self

A resource-based policy to include in the simulation provided as a string. Each resource in the simulation is treated as if it had this policy attached. You can include only one resource-based policy in a simulation.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn set_resource_policy(self, input: Option<String>) -> Self

A resource-based policy to include in the simulation provided as a string. Each resource in the simulation is treated as if it had this policy attached. You can include only one resource-based policy in a simulation.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn resource_owner(self, input: impl Into<String>) -> Self

An Amazon Web Services account ID that specifies the owner of any simulated resource that does not identify its owner in the resource ARN. Examples of resource ARNs include an S3 bucket or object. If ResourceOwner is specified, it is also used as the account owner of any ResourcePolicy included in the simulation. If the ResourceOwner parameter is not specified, then the owner of the resources and the resource policy defaults to the account of the identity provided in CallerArn. This parameter is required only if you specify a resource-based policy and account that owns the resource is different from the account that owns the simulated calling user CallerArn.

pub fn set_resource_owner(self, input: Option<String>) -> Self

An Amazon Web Services account ID that specifies the owner of any simulated resource that does not identify its owner in the resource ARN. Examples of resource ARNs include an S3 bucket or object. If ResourceOwner is specified, it is also used as the account owner of any ResourcePolicy included in the simulation. If the ResourceOwner parameter is not specified, then the owner of the resources and the resource policy defaults to the account of the identity provided in CallerArn. This parameter is required only if you specify a resource-based policy and account that owns the resource is different from the account that owns the simulated calling user CallerArn.

pub fn caller_arn(self, input: impl Into<String>) -> Self

The ARN of the IAM user that you want to specify as the simulated caller of the API operations. If you do not specify a CallerArn, it defaults to the ARN of the user that you specify in PolicySourceArn, if you specified a user. If you include both a PolicySourceArn (for example, arn:aws:iam::123456789012:user/David) and a CallerArn (for example, arn:aws:iam::123456789012:user/Bob), the result is that you simulate calling the API operations as Bob, as if Bob had David's policies.

You can specify only the ARN of an IAM user. You cannot specify the ARN of an assumed role, federated user, or a service principal.

CallerArn is required if you include a ResourcePolicy and the PolicySourceArn is not the ARN for an IAM user. This is required so that the resource-based policy's Principal element has a value to use in evaluating the policy.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

pub fn set_caller_arn(self, input: Option<String>) -> Self

The ARN of the IAM user that you want to specify as the simulated caller of the API operations. If you do not specify a CallerArn, it defaults to the ARN of the user that you specify in PolicySourceArn, if you specified a user. If you include both a PolicySourceArn (for example, arn:aws:iam::123456789012:user/David) and a CallerArn (for example, arn:aws:iam::123456789012:user/Bob), the result is that you simulate calling the API operations as Bob, as if Bob had David's policies.

You can specify only the ARN of an IAM user. You cannot specify the ARN of an assumed role, federated user, or a service principal.

CallerArn is required if you include a ResourcePolicy and the PolicySourceArn is not the ARN for an IAM user. This is required so that the resource-based policy's Principal element has a value to use in evaluating the policy.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

pub fn context_entries(self, input: ContextEntry) -> Self

Appends an item to ContextEntries.

To override the contents of this collection use set_context_entries.

A list of context keys and corresponding values for the simulation to use. Whenever a context key is evaluated in one of the simulated IAM permissions policies, the corresponding value is supplied.

pub fn set_context_entries(self, input: Option<Vec<ContextEntry>>) -> Self

A list of context keys and corresponding values for the simulation to use. Whenever a context key is evaluated in one of the simulated IAM permissions policies, the corresponding value is supplied.

pub fn resource_handling_option(self, input: impl Into<String>) -> Self

Specifies the type of simulation to run. Different API operations that support resource-based policies require different combinations of resources. By specifying the type of simulation to run, you enable the policy simulator to enforce the presence of the required resources to ensure reliable simulation results. If your simulation does not match one of the following scenarios, then you can omit this parameter. The following list shows each of the supported scenario values and the resources that you must define to run the simulation.

Each of the EC2 scenarios requires that you specify instance, image, and security group resources. If your scenario includes an EBS volume, then you must specify that volume as a resource. If the EC2 scenario includes VPC, then you must supply the network interface resource. If it includes an IP subnet, then you must specify the subnet resource. For more information on the EC2 scenario options, see Supported platforms in the Amazon EC2 User Guide.

• EC2-Classic-InstanceStore

  instance, image, security group

• EC2-Classic-EBS

  instance, image, security group, volume

• EC2-VPC-InstanceStore

  instance, image, security group, network interface

• EC2-VPC-InstanceStore-Subnet

  instance, image, security group, network interface, subnet

• EC2-VPC-EBS

  instance, image, security group, network interface, volume

• EC2-VPC-EBS-Subnet

  instance, image, security group, network interface, subnet, volume

pub fn set_resource_handling_option(self, input: Option<String>) -> Self

Specifies the type of simulation to run. Different API operations that support resource-based policies require different combinations of resources. By specifying the type of simulation to run, you enable the policy simulator to enforce the presence of the required resources to ensure reliable simulation results. If your simulation does not match one of the following scenarios, then you can omit this parameter. The following list shows each of the supported scenario values and the resources that you must define to run the simulation.

Each of the EC2 scenarios requires that you specify instance, image, and security group resources. If your scenario includes an EBS volume, then you must specify that volume as a resource. If the EC2 scenario includes VPC, then you must supply the network interface resource. If it includes an IP subnet, then you must specify the subnet resource. For more information on the EC2 scenario options, see Supported platforms in the Amazon EC2 User Guide.

• EC2-Classic-InstanceStore

  instance, image, security group

• EC2-Classic-EBS

  instance, image, security group, volume

• EC2-VPC-InstanceStore

  instance, image, security group, network interface

• EC2-VPC-InstanceStore-Subnet

  instance, image, security group, network interface, subnet

• EC2-VPC-EBS

  instance, image, security group, network interface, volume

• EC2-VPC-EBS-Subnet

  instance, image, security group, network interface, subnet, volume

pub fn max_items(self, input: i32) -> Self

Use this only when paginating results to indicate the maximum number of items you want in the response. If additional items exist beyond the maximum you specify, the IsTruncated response element is true.

If you do not include this parameter, the number of items defaults to 100. Note that IAM might return fewer results, even when there are more results available. In that case, the IsTruncated response element returns true, and Marker contains a value to include in the subsequent call that tells the service where to continue from.

pub fn set_max_items(self, input: Option<i32>) -> Self

Use this only when paginating results to indicate the maximum number of items you want in the response. If additional items exist beyond the maximum you specify, the IsTruncated response element is true.

If you do not include this parameter, the number of items defaults to 100. Note that IAM might return fewer results, even when there are more results available. In that case, the IsTruncated response element returns true, and Marker contains a value to include in the subsequent call that tells the service where to continue from.

pub fn marker(self, input: impl Into<String>) -> Self

Use this parameter only when paginating results and only after you receive a response indicating that the results are truncated. Set it to the value of the Marker element in the response that you received to indicate where the next call should start.

pub fn set_marker(self, input: Option<String>) -> Self

Use this parameter only when paginating results and only after you receive a response indicating that the results are truncated. Set it to the value of the Marker element in the response that you received to indicate where the next call should start.

Trait Implementations

impl Clone for SimulatePrincipalPolicy

fn clone(&self) -> SimulatePrincipalPolicy

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SimulatePrincipalPolicy

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.