pub struct BatchUpdateTableRowsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to BatchUpdateTableRows.
The BatchUpdateTableRows API allows you to update one or more rows in a table in a workbook.
You can specify the values to set in some or all of the columns in the table for the specified rows. If a column is not explicitly specified in a particular row, then that column will not be updated for that row. To clear out the data in a specific cell, you need to set the value as an empty string ("").
Implementations§
Source§impl BatchUpdateTableRowsFluentBuilder
impl BatchUpdateTableRowsFluentBuilder
Sourcepub fn as_input(&self) -> &BatchUpdateTableRowsInputBuilder
pub fn as_input(&self) -> &BatchUpdateTableRowsInputBuilder
Access the BatchUpdateTableRows as a reference.
Sourcepub async fn send(
self,
) -> Result<BatchUpdateTableRowsOutput, SdkError<BatchUpdateTableRowsError, HttpResponse>>
pub async fn send( self, ) -> Result<BatchUpdateTableRowsOutput, SdkError<BatchUpdateTableRowsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<BatchUpdateTableRowsOutput, BatchUpdateTableRowsError, Self>
pub fn customize( self, ) -> CustomizableOperation<BatchUpdateTableRowsOutput, BatchUpdateTableRowsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn workbook_id(self, input: impl Into<String>) -> Self
pub fn workbook_id(self, input: impl Into<String>) -> Self
The ID of the workbook where the rows are being updated.
If a workbook with the specified id could not be found, this API throws ResourceNotFoundException.
Sourcepub fn set_workbook_id(self, input: Option<String>) -> Self
pub fn set_workbook_id(self, input: Option<String>) -> Self
The ID of the workbook where the rows are being updated.
If a workbook with the specified id could not be found, this API throws ResourceNotFoundException.
Sourcepub fn get_workbook_id(&self) -> &Option<String>
pub fn get_workbook_id(&self) -> &Option<String>
The ID of the workbook where the rows are being updated.
If a workbook with the specified id could not be found, this API throws ResourceNotFoundException.
Sourcepub fn table_id(self, input: impl Into<String>) -> Self
pub fn table_id(self, input: impl Into<String>) -> Self
The ID of the table where the rows are being updated.
If a table with the specified id could not be found, this API throws ResourceNotFoundException.
Sourcepub fn set_table_id(self, input: Option<String>) -> Self
pub fn set_table_id(self, input: Option<String>) -> Self
The ID of the table where the rows are being updated.
If a table with the specified id could not be found, this API throws ResourceNotFoundException.
Sourcepub fn get_table_id(&self) -> &Option<String>
pub fn get_table_id(&self) -> &Option<String>
The ID of the table where the rows are being updated.
If a table with the specified id could not be found, this API throws ResourceNotFoundException.
Sourcepub fn rows_to_update(self, input: UpdateRowData) -> Self
pub fn rows_to_update(self, input: UpdateRowData) -> Self
Appends an item to rowsToUpdate.
To override the contents of this collection use set_rows_to_update.
The list of rows to update in the table. Each item in this list needs to contain the row id to update along with the map of column id to cell values for each column in that row that needs to be updated. You need to specify at least one row in this list, and for each row, you need to specify at least one column to update.
Note that if one of the row or column ids in the request does not exist in the table, then the request fails and no updates are made to the table.
Sourcepub fn set_rows_to_update(self, input: Option<Vec<UpdateRowData>>) -> Self
pub fn set_rows_to_update(self, input: Option<Vec<UpdateRowData>>) -> Self
The list of rows to update in the table. Each item in this list needs to contain the row id to update along with the map of column id to cell values for each column in that row that needs to be updated. You need to specify at least one row in this list, and for each row, you need to specify at least one column to update.
Note that if one of the row or column ids in the request does not exist in the table, then the request fails and no updates are made to the table.
Sourcepub fn get_rows_to_update(&self) -> &Option<Vec<UpdateRowData>>
pub fn get_rows_to_update(&self) -> &Option<Vec<UpdateRowData>>
The list of rows to update in the table. Each item in this list needs to contain the row id to update along with the map of column id to cell values for each column in that row that needs to be updated. You need to specify at least one row in this list, and for each row, you need to specify at least one column to update.
Note that if one of the row or column ids in the request does not exist in the table, then the request fails and no updates are made to the table.
Sourcepub fn client_request_token(self, input: impl Into<String>) -> Self
pub fn client_request_token(self, input: impl Into<String>) -> Self
The request token for performing the update action. Request tokens help to identify duplicate requests. If a call times out or fails due to a transient error like a failed network connection, you can retry the call with the same request token. The service ensures that if the first call using that request token is successfully performed, the second call will not perform the action again.
Note that request tokens are valid only for a few minutes. You cannot use request tokens to dedupe requests spanning hours or days.
Sourcepub fn set_client_request_token(self, input: Option<String>) -> Self
pub fn set_client_request_token(self, input: Option<String>) -> Self
The request token for performing the update action. Request tokens help to identify duplicate requests. If a call times out or fails due to a transient error like a failed network connection, you can retry the call with the same request token. The service ensures that if the first call using that request token is successfully performed, the second call will not perform the action again.
Note that request tokens are valid only for a few minutes. You cannot use request tokens to dedupe requests spanning hours or days.
Sourcepub fn get_client_request_token(&self) -> &Option<String>
pub fn get_client_request_token(&self) -> &Option<String>
The request token for performing the update action. Request tokens help to identify duplicate requests. If a call times out or fails due to a transient error like a failed network connection, you can retry the call with the same request token. The service ensures that if the first call using that request token is successfully performed, the second call will not perform the action again.
Note that request tokens are valid only for a few minutes. You cannot use request tokens to dedupe requests spanning hours or days.
Trait Implementations§
Source§impl Clone for BatchUpdateTableRowsFluentBuilder
impl Clone for BatchUpdateTableRowsFluentBuilder
Source§fn clone(&self) -> BatchUpdateTableRowsFluentBuilder
fn clone(&self) -> BatchUpdateTableRowsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for BatchUpdateTableRowsFluentBuilder
impl !RefUnwindSafe for BatchUpdateTableRowsFluentBuilder
impl Send for BatchUpdateTableRowsFluentBuilder
impl Sync for BatchUpdateTableRowsFluentBuilder
impl Unpin for BatchUpdateTableRowsFluentBuilder
impl !UnwindSafe for BatchUpdateTableRowsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);