pub struct CreateDetectorFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateDetector.
Creates a single GuardDuty detector. A detector is a resource that represents the GuardDuty service. To start using GuardDuty, you must create a detector in each Region where you enable the service. You can have only one detector per account per Region. All data sources are enabled in a new detector by default.
-
When you don't specify any
features, with an exception toRUNTIME_MONITORING, all the optional features are enabled by default. -
When you specify some of the
features, any feature that is not specified in the API call gets enabled by default, with an exception toRUNTIME_MONITORING.
Specifying both EKS Runtime Monitoring (EKS_RUNTIME_MONITORING) and Runtime Monitoring (RUNTIME_MONITORING) will cause an error. You can add only one of these two features because Runtime Monitoring already includes the threat detection for Amazon EKS resources. For more information, see Runtime Monitoring.
There might be regional differences because some data sources might not be available in all the Amazon Web Services Regions where GuardDuty is presently supported. For more information, see Regions and endpoints.
Implementations§
Source§impl CreateDetectorFluentBuilder
impl CreateDetectorFluentBuilder
Sourcepub fn as_input(&self) -> &CreateDetectorInputBuilder
pub fn as_input(&self) -> &CreateDetectorInputBuilder
Access the CreateDetector as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateDetectorOutput, SdkError<CreateDetectorError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateDetectorOutput, SdkError<CreateDetectorError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateDetectorOutput, CreateDetectorError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateDetectorOutput, CreateDetectorError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn enable(self, input: bool) -> Self
pub fn enable(self, input: bool) -> Self
A Boolean value that specifies whether the detector is to be enabled.
Sourcepub fn set_enable(self, input: Option<bool>) -> Self
pub fn set_enable(self, input: Option<bool>) -> Self
A Boolean value that specifies whether the detector is to be enabled.
Sourcepub fn get_enable(&self) -> &Option<bool>
pub fn get_enable(&self) -> &Option<bool>
A Boolean value that specifies whether the detector is to be enabled.
Sourcepub fn client_token(self, input: impl Into<String>) -> Self
pub fn client_token(self, input: impl Into<String>) -> Self
The idempotency token for the create request.
Sourcepub fn set_client_token(self, input: Option<String>) -> Self
pub fn set_client_token(self, input: Option<String>) -> Self
The idempotency token for the create request.
Sourcepub fn get_client_token(&self) -> &Option<String>
pub fn get_client_token(&self) -> &Option<String>
The idempotency token for the create request.
Sourcepub fn finding_publishing_frequency(
self,
input: FindingPublishingFrequency,
) -> Self
pub fn finding_publishing_frequency( self, input: FindingPublishingFrequency, ) -> Self
A value that specifies how frequently updated findings are exported.
Sourcepub fn set_finding_publishing_frequency(
self,
input: Option<FindingPublishingFrequency>,
) -> Self
pub fn set_finding_publishing_frequency( self, input: Option<FindingPublishingFrequency>, ) -> Self
A value that specifies how frequently updated findings are exported.
Sourcepub fn get_finding_publishing_frequency(
&self,
) -> &Option<FindingPublishingFrequency>
pub fn get_finding_publishing_frequency( &self, ) -> &Option<FindingPublishingFrequency>
A value that specifies how frequently updated findings are exported.
Sourcepub fn data_sources(self, input: DataSourceConfigurations) -> Self
👎Deprecated: This parameter is deprecated, use Features instead
pub fn data_sources(self, input: DataSourceConfigurations) -> Self
Describes which data sources will be enabled for the detector.
There might be regional differences because some data sources might not be available in all the Amazon Web Services Regions where GuardDuty is presently supported. For more information, see Regions and endpoints.
Sourcepub fn set_data_sources(self, input: Option<DataSourceConfigurations>) -> Self
👎Deprecated: This parameter is deprecated, use Features instead
pub fn set_data_sources(self, input: Option<DataSourceConfigurations>) -> Self
Describes which data sources will be enabled for the detector.
There might be regional differences because some data sources might not be available in all the Amazon Web Services Regions where GuardDuty is presently supported. For more information, see Regions and endpoints.
Sourcepub fn get_data_sources(&self) -> &Option<DataSourceConfigurations>
👎Deprecated: This parameter is deprecated, use Features instead
pub fn get_data_sources(&self) -> &Option<DataSourceConfigurations>
Describes which data sources will be enabled for the detector.
There might be regional differences because some data sources might not be available in all the Amazon Web Services Regions where GuardDuty is presently supported. For more information, see Regions and endpoints.
Adds a key-value pair to Tags.
To override the contents of this collection use set_tags.
The tags to be added to a new detector resource.
The tags to be added to a new detector resource.
The tags to be added to a new detector resource.
Sourcepub fn features(self, input: DetectorFeatureConfiguration) -> Self
pub fn features(self, input: DetectorFeatureConfiguration) -> Self
Appends an item to Features.
To override the contents of this collection use set_features.
A list of features that will be configured for the detector.
Sourcepub fn set_features(
self,
input: Option<Vec<DetectorFeatureConfiguration>>,
) -> Self
pub fn set_features( self, input: Option<Vec<DetectorFeatureConfiguration>>, ) -> Self
A list of features that will be configured for the detector.
Sourcepub fn get_features(&self) -> &Option<Vec<DetectorFeatureConfiguration>>
pub fn get_features(&self) -> &Option<Vec<DetectorFeatureConfiguration>>
A list of features that will be configured for the detector.
Trait Implementations§
Source§impl Clone for CreateDetectorFluentBuilder
impl Clone for CreateDetectorFluentBuilder
Source§fn clone(&self) -> CreateDetectorFluentBuilder
fn clone(&self) -> CreateDetectorFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateDetectorFluentBuilder
impl !RefUnwindSafe for CreateDetectorFluentBuilder
impl Send for CreateDetectorFluentBuilder
impl Sync for CreateDetectorFluentBuilder
impl Unpin for CreateDetectorFluentBuilder
impl !UnwindSafe for CreateDetectorFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);