pub struct UpdateAcceleratorFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateAccelerator.
Update an accelerator to make changes, such as the following:
-
Change the name of the accelerator.
-
Disable the accelerator so that it no longer accepts or routes traffic, or so that you can delete it.
-
Enable the accelerator, if it is disabled.
-
Change the IP address type to dual-stack if it is IPv4, or change the IP address type to IPv4 if it's dual-stack.
Be aware that static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete the accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them.
Global Accelerator is a global service that supports endpoints in multiple Amazon Web Services Regions but you must specify the US West (Oregon) Region to create, update, or otherwise work with accelerators. That is, for example, specify --region us-west-2 on Amazon Web Services CLI commands.
Implementations§
Source§impl UpdateAcceleratorFluentBuilder
impl UpdateAcceleratorFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateAcceleratorInputBuilder
pub fn as_input(&self) -> &UpdateAcceleratorInputBuilder
Access the UpdateAccelerator as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateAcceleratorOutput, SdkError<UpdateAcceleratorError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateAcceleratorOutput, SdkError<UpdateAcceleratorError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateAcceleratorOutput, UpdateAcceleratorError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateAcceleratorOutput, UpdateAcceleratorError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn accelerator_arn(self, input: impl Into<String>) -> Self
pub fn accelerator_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of the accelerator to update.
Sourcepub fn set_accelerator_arn(self, input: Option<String>) -> Self
pub fn set_accelerator_arn(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of the accelerator to update.
Sourcepub fn get_accelerator_arn(&self) -> &Option<String>
pub fn get_accelerator_arn(&self) -> &Option<String>
The Amazon Resource Name (ARN) of the accelerator to update.
Sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.
Sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.
Sourcepub fn get_name(&self) -> &Option<String>
pub fn get_name(&self) -> &Option<String>
The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters, periods (.), or hyphens (-), and must not begin or end with a hyphen or period.
Sourcepub fn ip_address_type(self, input: IpAddressType) -> Self
pub fn ip_address_type(self, input: IpAddressType) -> Self
The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.
Sourcepub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self
pub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self
The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.
Sourcepub fn get_ip_address_type(&self) -> &Option<IpAddressType>
pub fn get_ip_address_type(&self) -> &Option<IpAddressType>
The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.
Sourcepub fn ip_addresses(self, input: impl Into<String>) -> Self
pub fn ip_addresses(self, input: impl Into<String>) -> Self
Appends an item to IpAddresses.
To override the contents of this collection use set_ip_addresses.
The IP addresses for an accelerator.
Sourcepub fn set_ip_addresses(self, input: Option<Vec<String>>) -> Self
pub fn set_ip_addresses(self, input: Option<Vec<String>>) -> Self
The IP addresses for an accelerator.
Sourcepub fn get_ip_addresses(&self) -> &Option<Vec<String>>
pub fn get_ip_addresses(&self) -> &Option<Vec<String>>
The IP addresses for an accelerator.
Sourcepub fn enabled(self, input: bool) -> Self
pub fn enabled(self, input: bool) -> Self
Indicates whether an accelerator is enabled. The value is true or false. The default value is true.
If the value is set to true, the accelerator cannot be deleted. If set to false, the accelerator can be deleted.
Sourcepub fn set_enabled(self, input: Option<bool>) -> Self
pub fn set_enabled(self, input: Option<bool>) -> Self
Indicates whether an accelerator is enabled. The value is true or false. The default value is true.
If the value is set to true, the accelerator cannot be deleted. If set to false, the accelerator can be deleted.
Sourcepub fn get_enabled(&self) -> &Option<bool>
pub fn get_enabled(&self) -> &Option<bool>
Indicates whether an accelerator is enabled. The value is true or false. The default value is true.
If the value is set to true, the accelerator cannot be deleted. If set to false, the accelerator can be deleted.
Trait Implementations§
Source§impl Clone for UpdateAcceleratorFluentBuilder
impl Clone for UpdateAcceleratorFluentBuilder
Source§fn clone(&self) -> UpdateAcceleratorFluentBuilder
fn clone(&self) -> UpdateAcceleratorFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateAcceleratorFluentBuilder
impl !RefUnwindSafe for UpdateAcceleratorFluentBuilder
impl Send for UpdateAcceleratorFluentBuilder
impl Sync for UpdateAcceleratorFluentBuilder
impl Unpin for UpdateAcceleratorFluentBuilder
impl !UnwindSafe for UpdateAcceleratorFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);