#[non_exhaustive]pub struct CreateEndpointGroupInput {
pub listener_arn: Option<String>,
pub endpoint_group_region: Option<String>,
pub endpoint_configurations: Option<Vec<EndpointConfiguration>>,
pub traffic_dial_percentage: Option<f32>,
pub health_check_port: Option<i32>,
pub health_check_protocol: Option<HealthCheckProtocol>,
pub health_check_path: Option<String>,
pub health_check_interval_seconds: Option<i32>,
pub threshold_count: Option<i32>,
pub idempotency_token: Option<String>,
pub port_overrides: Option<Vec<PortOverride>>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.listener_arn: Option<String>
The Amazon Resource Name (ARN) of the listener.
endpoint_group_region: Option<String>
The Amazon Web Services Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
endpoint_configurations: Option<Vec<EndpointConfiguration>>
The list of endpoint objects.
traffic_dial_percentage: Option<f32>
The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for this listener.
Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.
The default value is 100.
health_check_port: Option<i32>
The port that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.
health_check_protocol: Option<HealthCheckProtocol>
The protocol that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
health_check_path: Option<String>
If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).
health_check_interval_seconds: Option<i32>
The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.
threshold_count: Option<i32>
The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
idempotency_token: Option<String>
A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.
port_overrides: Option<Vec<PortOverride>>
Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.
For more information, see Overriding listener ports in the Global Accelerator Developer Guide.
Implementations§
Source§impl CreateEndpointGroupInput
impl CreateEndpointGroupInput
Sourcepub fn listener_arn(&self) -> Option<&str>
pub fn listener_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the listener.
Sourcepub fn endpoint_group_region(&self) -> Option<&str>
pub fn endpoint_group_region(&self) -> Option<&str>
The Amazon Web Services Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
Sourcepub fn endpoint_configurations(&self) -> &[EndpointConfiguration]
pub fn endpoint_configurations(&self) -> &[EndpointConfiguration]
The list of endpoint objects.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .endpoint_configurations.is_none()
.
Sourcepub fn traffic_dial_percentage(&self) -> Option<f32>
pub fn traffic_dial_percentage(&self) -> Option<f32>
The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for this listener.
Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.
The default value is 100.
Sourcepub fn health_check_port(&self) -> Option<i32>
pub fn health_check_port(&self) -> Option<i32>
The port that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.
Sourcepub fn health_check_protocol(&self) -> Option<&HealthCheckProtocol>
pub fn health_check_protocol(&self) -> Option<&HealthCheckProtocol>
The protocol that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
Sourcepub fn health_check_path(&self) -> Option<&str>
pub fn health_check_path(&self) -> Option<&str>
If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).
Sourcepub fn health_check_interval_seconds(&self) -> Option<i32>
pub fn health_check_interval_seconds(&self) -> Option<i32>
The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.
Sourcepub fn threshold_count(&self) -> Option<i32>
pub fn threshold_count(&self) -> Option<i32>
The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
Sourcepub fn idempotency_token(&self) -> Option<&str>
pub fn idempotency_token(&self) -> Option<&str>
A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.
Sourcepub fn port_overrides(&self) -> &[PortOverride]
pub fn port_overrides(&self) -> &[PortOverride]
Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.
For more information, see Overriding listener ports in the Global Accelerator Developer Guide.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .port_overrides.is_none()
.
Source§impl CreateEndpointGroupInput
impl CreateEndpointGroupInput
Sourcepub fn builder() -> CreateEndpointGroupInputBuilder
pub fn builder() -> CreateEndpointGroupInputBuilder
Creates a new builder-style object to manufacture CreateEndpointGroupInput
.
Trait Implementations§
Source§impl Clone for CreateEndpointGroupInput
impl Clone for CreateEndpointGroupInput
Source§fn clone(&self) -> CreateEndpointGroupInput
fn clone(&self) -> CreateEndpointGroupInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for CreateEndpointGroupInput
impl Debug for CreateEndpointGroupInput
Source§impl PartialEq for CreateEndpointGroupInput
impl PartialEq for CreateEndpointGroupInput
impl StructuralPartialEq for CreateEndpointGroupInput
Auto Trait Implementations§
impl Freeze for CreateEndpointGroupInput
impl RefUnwindSafe for CreateEndpointGroupInput
impl Send for CreateEndpointGroupInput
impl Sync for CreateEndpointGroupInput
impl Unpin for CreateEndpointGroupInput
impl UnwindSafe for CreateEndpointGroupInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);