Struct CreateEndpointGroupFluentBuilder 

pub struct CreateEndpointGroupFluentBuilder { /* private fields */ }

Fluent builder constructing a request to CreateEndpointGroup.

Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one Amazon Web Services Region. A resource must be valid and active when you add it as an endpoint.

For more information about endpoint types and requirements for endpoints that you can add to Global Accelerator, see Endpoints for standard accelerators in the Global Accelerator Developer Guide.

Implementations

impl CreateEndpointGroupFluentBuilder

pub fn as_input(&self) -> &CreateEndpointGroupInputBuilder

Access the CreateEndpointGroup as a reference.

pub async fn send( self, ) -> Result<CreateEndpointGroupOutput, SdkError<CreateEndpointGroupError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self, ) -> CustomizableOperation<CreateEndpointGroupOutput, CreateEndpointGroupError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn listener_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the listener.

pub fn set_listener_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the listener.

pub fn get_listener_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the listener.

pub fn endpoint_group_region(self, input: impl Into<String>) -> Self

The Amazon Web Services Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.

pub fn set_endpoint_group_region(self, input: Option<String>) -> Self

The Amazon Web Services Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.

pub fn get_endpoint_group_region(&self) -> &Option<String>

The Amazon Web Services Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.

pub fn endpoint_configurations(self, input: EndpointConfiguration) -> Self

Appends an item to EndpointConfigurations.

To override the contents of this collection use set_endpoint_configurations.

The list of endpoint objects.

pub fn set_endpoint_configurations( self, input: Option<Vec<EndpointConfiguration>>, ) -> Self

The list of endpoint objects.

pub fn get_endpoint_configurations(&self) -> &Option<Vec<EndpointConfiguration>>

The list of endpoint objects.

pub fn traffic_dial_percentage(self, input: f32) -> Self

The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for this listener.

Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

The default value is 100.

pub fn set_traffic_dial_percentage(self, input: Option<f32>) -> Self

The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for this listener.

Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

The default value is 100.

pub fn get_traffic_dial_percentage(&self) -> &Option<f32>

The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for this listener.

Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

The default value is 100.

pub fn health_check_port(self, input: i32) -> Self

The port that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.

pub fn set_health_check_port(self, input: Option<i32>) -> Self

The port that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.

pub fn get_health_check_port(&self) -> &Option<i32>

The port that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.

pub fn health_check_protocol(self, input: HealthCheckProtocol) -> Self

The protocol that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.

pub fn set_health_check_protocol( self, input: Option<HealthCheckProtocol>, ) -> Self

The protocol that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.

pub fn get_health_check_protocol(&self) -> &Option<HealthCheckProtocol>

The protocol that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.

pub fn health_check_path(self, input: impl Into<String>) -> Self

If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).

pub fn set_health_check_path(self, input: Option<String>) -> Self

If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).

pub fn get_health_check_path(&self) -> &Option<String>

If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).

pub fn health_check_interval_seconds(self, input: i32) -> Self

The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.

pub fn set_health_check_interval_seconds(self, input: Option<i32>) -> Self

The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.

pub fn get_health_check_interval_seconds(&self) -> &Option<i32>

The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.

pub fn threshold_count(self, input: i32) -> Self

The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.

pub fn set_threshold_count(self, input: Option<i32>) -> Self

The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.

pub fn get_threshold_count(&self) -> &Option<i32>

The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.

pub fn idempotency_token(self, input: impl Into<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.

pub fn set_idempotency_token(self, input: Option<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.

pub fn get_idempotency_token(&self) -> &Option<String>

A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.

pub fn port_overrides(self, input: PortOverride) -> Self

Appends an item to PortOverrides.

To override the contents of this collection use set_port_overrides.

Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

For more information, see Overriding listener ports in the Global Accelerator Developer Guide.

pub fn set_port_overrides(self, input: Option<Vec<PortOverride>>) -> Self

Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

For more information, see Overriding listener ports in the Global Accelerator Developer Guide.

pub fn get_port_overrides(&self) -> &Option<Vec<PortOverride>>

Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

For more information, see Overriding listener ports in the Global Accelerator Developer Guide.

Trait Implementations

impl Clone for CreateEndpointGroupFluentBuilder

fn clone(&self) -> CreateEndpointGroupFluentBuilder

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateEndpointGroupFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.