#[non_exhaustive]pub struct AllowCustomRoutingTrafficInput {
pub endpoint_group_arn: Option<String>,
pub endpoint_id: Option<String>,
pub destination_addresses: Option<Vec<String>>,
pub destination_ports: Option<Vec<i32>>,
pub allow_all_traffic_to_endpoint: Option<bool>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.endpoint_group_arn: Option<String>
The Amazon Resource Name (ARN) of the endpoint group.
endpoint_id: Option<String>
An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.
destination_addresses: Option<Vec<String>>
A list of specific Amazon EC2 instance IP addresses (destination addresses) in a subnet that you want to allow to receive traffic. The IP addresses must be a subset of the IP addresses that you specified for the endpoint group.
DestinationAddresses
is required if AllowAllTrafficToEndpoint
is FALSE
or is not specified.
destination_ports: Option<Vec<i32>>
A list of specific Amazon EC2 instance ports (destination ports) that you want to allow to receive traffic.
allow_all_traffic_to_endpoint: Option<bool>
Indicates whether all destination IP addresses and ports for a specified VPC subnet endpoint can receive traffic from a custom routing accelerator. The value is TRUE or FALSE.
When set to TRUE, all destinations in the custom routing VPC subnet can receive traffic. Note that you cannot specify destination IP addresses and ports when the value is set to TRUE.
When set to FALSE (or not specified), you must specify a list of destination IP addresses that are allowed to receive traffic. A list of ports is optional. If you don't specify a list of ports, the ports that can accept traffic is the same as the ports configured for the endpoint group.
The default value is FALSE.
Implementations§
Source§impl AllowCustomRoutingTrafficInput
impl AllowCustomRoutingTrafficInput
Sourcepub fn endpoint_group_arn(&self) -> Option<&str>
pub fn endpoint_group_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the endpoint group.
Sourcepub fn endpoint_id(&self) -> Option<&str>
pub fn endpoint_id(&self) -> Option<&str>
An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.
Sourcepub fn destination_addresses(&self) -> &[String]
pub fn destination_addresses(&self) -> &[String]
A list of specific Amazon EC2 instance IP addresses (destination addresses) in a subnet that you want to allow to receive traffic. The IP addresses must be a subset of the IP addresses that you specified for the endpoint group.
DestinationAddresses
is required if AllowAllTrafficToEndpoint
is FALSE
or is not specified.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .destination_addresses.is_none()
.
Sourcepub fn destination_ports(&self) -> &[i32]
pub fn destination_ports(&self) -> &[i32]
A list of specific Amazon EC2 instance ports (destination ports) that you want to allow to receive traffic.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .destination_ports.is_none()
.
Sourcepub fn allow_all_traffic_to_endpoint(&self) -> Option<bool>
pub fn allow_all_traffic_to_endpoint(&self) -> Option<bool>
Indicates whether all destination IP addresses and ports for a specified VPC subnet endpoint can receive traffic from a custom routing accelerator. The value is TRUE or FALSE.
When set to TRUE, all destinations in the custom routing VPC subnet can receive traffic. Note that you cannot specify destination IP addresses and ports when the value is set to TRUE.
When set to FALSE (or not specified), you must specify a list of destination IP addresses that are allowed to receive traffic. A list of ports is optional. If you don't specify a list of ports, the ports that can accept traffic is the same as the ports configured for the endpoint group.
The default value is FALSE.
Source§impl AllowCustomRoutingTrafficInput
impl AllowCustomRoutingTrafficInput
Sourcepub fn builder() -> AllowCustomRoutingTrafficInputBuilder
pub fn builder() -> AllowCustomRoutingTrafficInputBuilder
Creates a new builder-style object to manufacture AllowCustomRoutingTrafficInput
.
Trait Implementations§
Source§impl Clone for AllowCustomRoutingTrafficInput
impl Clone for AllowCustomRoutingTrafficInput
Source§fn clone(&self) -> AllowCustomRoutingTrafficInput
fn clone(&self) -> AllowCustomRoutingTrafficInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl PartialEq for AllowCustomRoutingTrafficInput
impl PartialEq for AllowCustomRoutingTrafficInput
Source§fn eq(&self, other: &AllowCustomRoutingTrafficInput) -> bool
fn eq(&self, other: &AllowCustomRoutingTrafficInput) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for AllowCustomRoutingTrafficInput
Auto Trait Implementations§
impl Freeze for AllowCustomRoutingTrafficInput
impl RefUnwindSafe for AllowCustomRoutingTrafficInput
impl Send for AllowCustomRoutingTrafficInput
impl Sync for AllowCustomRoutingTrafficInput
impl Unpin for AllowCustomRoutingTrafficInput
impl UnwindSafe for AllowCustomRoutingTrafficInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);