pub struct AllowCustomRoutingTrafficFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to AllowCustomRoutingTraffic.
Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that can receive traffic for a custom routing accelerator. You can allow traffic to all destinations in the subnet endpoint, or allow traffic to a specified list of destination IP addresses and ports in the subnet. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.
After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.
Implementations§
Source§impl AllowCustomRoutingTrafficFluentBuilder
impl AllowCustomRoutingTrafficFluentBuilder
Sourcepub fn as_input(&self) -> &AllowCustomRoutingTrafficInputBuilder
pub fn as_input(&self) -> &AllowCustomRoutingTrafficInputBuilder
Access the AllowCustomRoutingTraffic as a reference.
Sourcepub async fn send(
self,
) -> Result<AllowCustomRoutingTrafficOutput, SdkError<AllowCustomRoutingTrafficError, HttpResponse>>
pub async fn send( self, ) -> Result<AllowCustomRoutingTrafficOutput, SdkError<AllowCustomRoutingTrafficError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<AllowCustomRoutingTrafficOutput, AllowCustomRoutingTrafficError, Self>
pub fn customize( self, ) -> CustomizableOperation<AllowCustomRoutingTrafficOutput, AllowCustomRoutingTrafficError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn endpoint_group_arn(self, input: impl Into<String>) -> Self
pub fn endpoint_group_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of the endpoint group.
Sourcepub fn set_endpoint_group_arn(self, input: Option<String>) -> Self
pub fn set_endpoint_group_arn(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of the endpoint group.
Sourcepub fn get_endpoint_group_arn(&self) -> &Option<String>
pub fn get_endpoint_group_arn(&self) -> &Option<String>
The Amazon Resource Name (ARN) of the endpoint group.
Sourcepub fn endpoint_id(self, input: impl Into<String>) -> Self
pub fn endpoint_id(self, input: impl Into<String>) -> Self
An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.
Sourcepub fn set_endpoint_id(self, input: Option<String>) -> Self
pub fn set_endpoint_id(self, input: Option<String>) -> Self
An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.
Sourcepub fn get_endpoint_id(&self) -> &Option<String>
pub fn get_endpoint_id(&self) -> &Option<String>
An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.
Sourcepub fn destination_addresses(self, input: impl Into<String>) -> Self
pub fn destination_addresses(self, input: impl Into<String>) -> Self
Appends an item to DestinationAddresses.
To override the contents of this collection use set_destination_addresses.
A list of specific Amazon EC2 instance IP addresses (destination addresses) in a subnet that you want to allow to receive traffic. The IP addresses must be a subset of the IP addresses that you specified for the endpoint group.
DestinationAddresses is required if AllowAllTrafficToEndpoint is FALSE or is not specified.
Sourcepub fn set_destination_addresses(self, input: Option<Vec<String>>) -> Self
pub fn set_destination_addresses(self, input: Option<Vec<String>>) -> Self
A list of specific Amazon EC2 instance IP addresses (destination addresses) in a subnet that you want to allow to receive traffic. The IP addresses must be a subset of the IP addresses that you specified for the endpoint group.
DestinationAddresses is required if AllowAllTrafficToEndpoint is FALSE or is not specified.
Sourcepub fn get_destination_addresses(&self) -> &Option<Vec<String>>
pub fn get_destination_addresses(&self) -> &Option<Vec<String>>
A list of specific Amazon EC2 instance IP addresses (destination addresses) in a subnet that you want to allow to receive traffic. The IP addresses must be a subset of the IP addresses that you specified for the endpoint group.
DestinationAddresses is required if AllowAllTrafficToEndpoint is FALSE or is not specified.
Sourcepub fn destination_ports(self, input: i32) -> Self
pub fn destination_ports(self, input: i32) -> Self
Appends an item to DestinationPorts.
To override the contents of this collection use set_destination_ports.
A list of specific Amazon EC2 instance ports (destination ports) that you want to allow to receive traffic.
Sourcepub fn set_destination_ports(self, input: Option<Vec<i32>>) -> Self
pub fn set_destination_ports(self, input: Option<Vec<i32>>) -> Self
A list of specific Amazon EC2 instance ports (destination ports) that you want to allow to receive traffic.
Sourcepub fn get_destination_ports(&self) -> &Option<Vec<i32>>
pub fn get_destination_ports(&self) -> &Option<Vec<i32>>
A list of specific Amazon EC2 instance ports (destination ports) that you want to allow to receive traffic.
Sourcepub fn allow_all_traffic_to_endpoint(self, input: bool) -> Self
pub fn allow_all_traffic_to_endpoint(self, input: bool) -> Self
Indicates whether all destination IP addresses and ports for a specified VPC subnet endpoint can receive traffic from a custom routing accelerator. The value is TRUE or FALSE.
When set to TRUE, all destinations in the custom routing VPC subnet can receive traffic. Note that you cannot specify destination IP addresses and ports when the value is set to TRUE.
When set to FALSE (or not specified), you must specify a list of destination IP addresses that are allowed to receive traffic. A list of ports is optional. If you don't specify a list of ports, the ports that can accept traffic is the same as the ports configured for the endpoint group.
The default value is FALSE.
Sourcepub fn set_allow_all_traffic_to_endpoint(self, input: Option<bool>) -> Self
pub fn set_allow_all_traffic_to_endpoint(self, input: Option<bool>) -> Self
Indicates whether all destination IP addresses and ports for a specified VPC subnet endpoint can receive traffic from a custom routing accelerator. The value is TRUE or FALSE.
When set to TRUE, all destinations in the custom routing VPC subnet can receive traffic. Note that you cannot specify destination IP addresses and ports when the value is set to TRUE.
When set to FALSE (or not specified), you must specify a list of destination IP addresses that are allowed to receive traffic. A list of ports is optional. If you don't specify a list of ports, the ports that can accept traffic is the same as the ports configured for the endpoint group.
The default value is FALSE.
Sourcepub fn get_allow_all_traffic_to_endpoint(&self) -> &Option<bool>
pub fn get_allow_all_traffic_to_endpoint(&self) -> &Option<bool>
Indicates whether all destination IP addresses and ports for a specified VPC subnet endpoint can receive traffic from a custom routing accelerator. The value is TRUE or FALSE.
When set to TRUE, all destinations in the custom routing VPC subnet can receive traffic. Note that you cannot specify destination IP addresses and ports when the value is set to TRUE.
When set to FALSE (or not specified), you must specify a list of destination IP addresses that are allowed to receive traffic. A list of ports is optional. If you don't specify a list of ports, the ports that can accept traffic is the same as the ports configured for the endpoint group.
The default value is FALSE.
Trait Implementations§
Source§impl Clone for AllowCustomRoutingTrafficFluentBuilder
impl Clone for AllowCustomRoutingTrafficFluentBuilder
Source§fn clone(&self) -> AllowCustomRoutingTrafficFluentBuilder
fn clone(&self) -> AllowCustomRoutingTrafficFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for AllowCustomRoutingTrafficFluentBuilder
impl !RefUnwindSafe for AllowCustomRoutingTrafficFluentBuilder
impl Send for AllowCustomRoutingTrafficFluentBuilder
impl Sync for AllowCustomRoutingTrafficFluentBuilder
impl Unpin for AllowCustomRoutingTrafficFluentBuilder
impl !UnwindSafe for AllowCustomRoutingTrafficFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);