pub struct AddCustomRoutingEndpointsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to AddCustomRoutingEndpoints.
Associate a virtual private cloud (VPC) subnet endpoint with your custom routing accelerator.
The listener port range must be large enough to support the number of IP addresses that can be specified in your subnet. The number of ports required is: subnet size times the number of ports per destination EC2 instances. For example, a subnet defined as /24 requires a listener port range of at least 255 ports.
Note: You must have enough remaining listener ports available to map to the subnet ports, or the call will fail with a LimitExceededException.
By default, all destinations in a subnet in a custom routing accelerator cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.
Implementations§
Source§impl AddCustomRoutingEndpointsFluentBuilder
impl AddCustomRoutingEndpointsFluentBuilder
Sourcepub fn as_input(&self) -> &AddCustomRoutingEndpointsInputBuilder
pub fn as_input(&self) -> &AddCustomRoutingEndpointsInputBuilder
Access the AddCustomRoutingEndpoints as a reference.
Sourcepub async fn send(
self,
) -> Result<AddCustomRoutingEndpointsOutput, SdkError<AddCustomRoutingEndpointsError, HttpResponse>>
pub async fn send( self, ) -> Result<AddCustomRoutingEndpointsOutput, SdkError<AddCustomRoutingEndpointsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<AddCustomRoutingEndpointsOutput, AddCustomRoutingEndpointsError, Self>
pub fn customize( self, ) -> CustomizableOperation<AddCustomRoutingEndpointsOutput, AddCustomRoutingEndpointsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn endpoint_configurations(
self,
input: CustomRoutingEndpointConfiguration,
) -> Self
pub fn endpoint_configurations( self, input: CustomRoutingEndpointConfiguration, ) -> Self
Appends an item to EndpointConfigurations.
To override the contents of this collection use set_endpoint_configurations.
The list of endpoint objects to add to a custom routing accelerator.
Sourcepub fn set_endpoint_configurations(
self,
input: Option<Vec<CustomRoutingEndpointConfiguration>>,
) -> Self
pub fn set_endpoint_configurations( self, input: Option<Vec<CustomRoutingEndpointConfiguration>>, ) -> Self
The list of endpoint objects to add to a custom routing accelerator.
Sourcepub fn get_endpoint_configurations(
&self,
) -> &Option<Vec<CustomRoutingEndpointConfiguration>>
pub fn get_endpoint_configurations( &self, ) -> &Option<Vec<CustomRoutingEndpointConfiguration>>
The list of endpoint objects to add to a custom routing accelerator.
Sourcepub fn endpoint_group_arn(self, input: impl Into<String>) -> Self
pub fn endpoint_group_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of the endpoint group for the custom routing endpoint.
Sourcepub fn set_endpoint_group_arn(self, input: Option<String>) -> Self
pub fn set_endpoint_group_arn(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of the endpoint group for the custom routing endpoint.
Sourcepub fn get_endpoint_group_arn(&self) -> &Option<String>
pub fn get_endpoint_group_arn(&self) -> &Option<String>
The Amazon Resource Name (ARN) of the endpoint group for the custom routing endpoint.
Trait Implementations§
Source§impl Clone for AddCustomRoutingEndpointsFluentBuilder
impl Clone for AddCustomRoutingEndpointsFluentBuilder
Source§fn clone(&self) -> AddCustomRoutingEndpointsFluentBuilder
fn clone(&self) -> AddCustomRoutingEndpointsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for AddCustomRoutingEndpointsFluentBuilder
impl !RefUnwindSafe for AddCustomRoutingEndpointsFluentBuilder
impl Send for AddCustomRoutingEndpointsFluentBuilder
impl Sync for AddCustomRoutingEndpointsFluentBuilder
impl Unpin for AddCustomRoutingEndpointsFluentBuilder
impl !UnwindSafe for AddCustomRoutingEndpointsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);