CreateStreamGroupFluentBuilder

aws_sdk_gameliftstreams::operation::create_stream_group::builders

Struct CreateStreamGroupFluentBuilder 

Source 
pub struct CreateStreamGroupFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to CreateStreamGroup.

Stream groups manage how Amazon GameLift Streams allocates resources and handles concurrent streams, allowing you to effectively manage capacity and costs. Within a stream group, you specify an application to stream, streaming locations and their capacity, and the stream class you want to use when streaming applications to your end-users. A stream class defines the hardware configuration of the compute resources that Amazon GameLift Streams will use when streaming, such as the CPU, GPU, and memory.

Stream capacity represents the number of concurrent streams that can be active at a time. You set stream capacity per location, per stream group. There are two types of capacity, always-on and on-demand:

  • Always-on: The streaming capacity that is allocated and ready to handle stream requests without delay. You pay for this capacity whether it's in use or not. Best for quickest time from streaming request to streaming session. Default is 1 (2 for high stream classes) when creating a stream group or adding a location.

  • On-demand: The streaming capacity that Amazon GameLift Streams can allocate in response to stream requests, and then de-allocate when the session has terminated. This offers a cost control measure at the expense of a greater startup time (typically under 5 minutes). Default is 0 when creating a stream group or adding a location.

Values for capacity must be whole number multiples of the tenancy value of the stream group's stream class.

To adjust the capacity of any ACTIVE stream group, call UpdateStreamGroup.

If the CreateStreamGroup request is successful, Amazon GameLift Streams assigns a unique ID to the stream group resource and sets the status to ACTIVATING. It can take a few minutes for Amazon GameLift Streams to finish creating the stream group while it searches for unallocated compute resources and provisions them. When complete, the stream group status will be ACTIVE and you can start stream sessions by using StartStreamSession. To check the stream group's status, call GetStreamGroup.

Stream groups should be recreated every 3-4 weeks to pick up important service updates and fixes. Stream groups that are older than 180 days can no longer be updated with new application associations. Stream groups expire when they are 365 days old, at which point they can no longer stream sessions. The exact expiration date is indicated by the date value in the ExpiresAt field.

Implementations§

Source§

impl CreateStreamGroupFluentBuilder

Source

pub fn as_input(&self) -> &CreateStreamGroupInputBuilder

Access the CreateStreamGroup as a reference.

Source

pub async fn send( self, ) -> Result<CreateStreamGroupOutput, SdkError<CreateStreamGroupError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize( self, ) -> CustomizableOperation<CreateStreamGroupOutput, CreateStreamGroupError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn description(self, input: impl Into<String>) -> Self

A descriptive label for the stream group.

Source

pub fn set_description(self, input: Option<String>) -> Self

A descriptive label for the stream group.

Source

pub fn get_description(&self) -> &Option<String>

A descriptive label for the stream group.

Source

pub fn stream_class(self, input: StreamClass) -> Self

The target stream quality for sessions that are hosted in this stream group. Set a stream class that is appropriate to the type of content that you're streaming. Stream class determines the type of computing resources Amazon GameLift Streams uses and impacts the cost of streaming. The following options are available:

A stream class can be one of the following:

  • gen5n_win2022 (NVIDIA, ultra) Supports applications with extremely high 3D scene complexity. Runs applications on Microsoft Windows Server 2022 Base and supports DirectX 12. Compatible with Unreal Engine versions up through 5.4, 32 and 64-bit applications, and anti-cheat technology. Uses NVIDIA A10G Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 24 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

  • gen5n_high (NVIDIA, high) Supports applications with moderate to high 3D scene complexity. Uses NVIDIA A10G Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 4 vCPUs, 16 GB RAM, 12 GB VRAM

    • Tenancy: Supports up to 2 concurrent stream sessions

  • gen5n_ultra (NVIDIA, ultra) Supports applications with extremely high 3D scene complexity. Uses dedicated NVIDIA A10G Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 24 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

  • gen4n_win2022 (NVIDIA, ultra) Supports applications with extremely high 3D scene complexity. Runs applications on Microsoft Windows Server 2022 Base and supports DirectX 12. Compatible with Unreal Engine versions up through 5.4, 32 and 64-bit applications, and anti-cheat technology. Uses NVIDIA T4 Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 16 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

  • gen4n_high (NVIDIA, high) Supports applications with moderate to high 3D scene complexity. Uses NVIDIA T4 Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 4 vCPUs, 16 GB RAM, 8 GB VRAM

    • Tenancy: Supports up to 2 concurrent stream sessions

  • gen4n_ultra (NVIDIA, ultra) Supports applications with high 3D scene complexity. Uses dedicated NVIDIA T4 Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 16 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

Source

pub fn set_stream_class(self, input: Option<StreamClass>) -> Self

The target stream quality for sessions that are hosted in this stream group. Set a stream class that is appropriate to the type of content that you're streaming. Stream class determines the type of computing resources Amazon GameLift Streams uses and impacts the cost of streaming. The following options are available:

A stream class can be one of the following:

  • gen5n_win2022 (NVIDIA, ultra) Supports applications with extremely high 3D scene complexity. Runs applications on Microsoft Windows Server 2022 Base and supports DirectX 12. Compatible with Unreal Engine versions up through 5.4, 32 and 64-bit applications, and anti-cheat technology. Uses NVIDIA A10G Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 24 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

  • gen5n_high (NVIDIA, high) Supports applications with moderate to high 3D scene complexity. Uses NVIDIA A10G Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 4 vCPUs, 16 GB RAM, 12 GB VRAM

    • Tenancy: Supports up to 2 concurrent stream sessions

  • gen5n_ultra (NVIDIA, ultra) Supports applications with extremely high 3D scene complexity. Uses dedicated NVIDIA A10G Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 24 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

  • gen4n_win2022 (NVIDIA, ultra) Supports applications with extremely high 3D scene complexity. Runs applications on Microsoft Windows Server 2022 Base and supports DirectX 12. Compatible with Unreal Engine versions up through 5.4, 32 and 64-bit applications, and anti-cheat technology. Uses NVIDIA T4 Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 16 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

  • gen4n_high (NVIDIA, high) Supports applications with moderate to high 3D scene complexity. Uses NVIDIA T4 Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 4 vCPUs, 16 GB RAM, 8 GB VRAM

    • Tenancy: Supports up to 2 concurrent stream sessions

  • gen4n_ultra (NVIDIA, ultra) Supports applications with high 3D scene complexity. Uses dedicated NVIDIA T4 Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 16 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

Source

pub fn get_stream_class(&self) -> &Option<StreamClass>

The target stream quality for sessions that are hosted in this stream group. Set a stream class that is appropriate to the type of content that you're streaming. Stream class determines the type of computing resources Amazon GameLift Streams uses and impacts the cost of streaming. The following options are available:

A stream class can be one of the following:

  • gen5n_win2022 (NVIDIA, ultra) Supports applications with extremely high 3D scene complexity. Runs applications on Microsoft Windows Server 2022 Base and supports DirectX 12. Compatible with Unreal Engine versions up through 5.4, 32 and 64-bit applications, and anti-cheat technology. Uses NVIDIA A10G Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 24 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

  • gen5n_high (NVIDIA, high) Supports applications with moderate to high 3D scene complexity. Uses NVIDIA A10G Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 4 vCPUs, 16 GB RAM, 12 GB VRAM

    • Tenancy: Supports up to 2 concurrent stream sessions

  • gen5n_ultra (NVIDIA, ultra) Supports applications with extremely high 3D scene complexity. Uses dedicated NVIDIA A10G Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 24 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

  • gen4n_win2022 (NVIDIA, ultra) Supports applications with extremely high 3D scene complexity. Runs applications on Microsoft Windows Server 2022 Base and supports DirectX 12. Compatible with Unreal Engine versions up through 5.4, 32 and 64-bit applications, and anti-cheat technology. Uses NVIDIA T4 Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 16 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

  • gen4n_high (NVIDIA, high) Supports applications with moderate to high 3D scene complexity. Uses NVIDIA T4 Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 4 vCPUs, 16 GB RAM, 8 GB VRAM

    • Tenancy: Supports up to 2 concurrent stream sessions

  • gen4n_ultra (NVIDIA, ultra) Supports applications with high 3D scene complexity. Uses dedicated NVIDIA T4 Tensor GPU.

    • Reference resolution: 1080p

    • Reference frame rate: 60 fps

    • Workload specifications: 8 vCPUs, 32 GB RAM, 16 GB VRAM

    • Tenancy: Supports 1 concurrent stream session

Source

pub fn default_application_identifier(self, input: impl Into<String>) -> Self

The unique identifier of the Amazon GameLift Streams application that you want to set as the default application in a stream group. The application that you specify must be in READY status. The default application is pre-cached on always-on compute resources, reducing stream startup times. Other applications are automatically cached as needed.

If you do not link an application when you create a stream group, you will need to link one later, before you can start streaming, using AssociateApplications.

This value is an Amazon Resource Name (ARN) or ID that uniquely identifies the application resource. Example ARN: arn:aws:gameliftstreams:us-west-2:111122223333:application/a-9ZY8X7Wv6. Example ID: a-9ZY8X7Wv6.

Source

pub fn set_default_application_identifier(self, input: Option<String>) -> Self

The unique identifier of the Amazon GameLift Streams application that you want to set as the default application in a stream group. The application that you specify must be in READY status. The default application is pre-cached on always-on compute resources, reducing stream startup times. Other applications are automatically cached as needed.

If you do not link an application when you create a stream group, you will need to link one later, before you can start streaming, using AssociateApplications.

This value is an Amazon Resource Name (ARN) or ID that uniquely identifies the application resource. Example ARN: arn:aws:gameliftstreams:us-west-2:111122223333:application/a-9ZY8X7Wv6. Example ID: a-9ZY8X7Wv6.

Source

pub fn get_default_application_identifier(&self) -> &Option<String>

The unique identifier of the Amazon GameLift Streams application that you want to set as the default application in a stream group. The application that you specify must be in READY status. The default application is pre-cached on always-on compute resources, reducing stream startup times. Other applications are automatically cached as needed.

If you do not link an application when you create a stream group, you will need to link one later, before you can start streaming, using AssociateApplications.

This value is an Amazon Resource Name (ARN) or ID that uniquely identifies the application resource. Example ARN: arn:aws:gameliftstreams:us-west-2:111122223333:application/a-9ZY8X7Wv6. Example ID: a-9ZY8X7Wv6.

Source

pub fn location_configurations(self, input: LocationConfiguration) -> Self

Appends an item to LocationConfigurations.

To override the contents of this collection use set_location_configurations.

A set of one or more locations and the streaming capacity for each location.

Source

pub fn set_location_configurations( self, input: Option<Vec<LocationConfiguration>>, ) -> Self

A set of one or more locations and the streaming capacity for each location.

Source

pub fn get_location_configurations(&self) -> &Option<Vec<LocationConfiguration>>

A set of one or more locations and the streaming capacity for each location.

Source

pub fn tags(self, k: impl Into<String>, v: impl Into<String>) -> Self

Adds a key-value pair to Tags.

To override the contents of this collection use set_tags.

A list of labels to assign to the new stream group resource. Tags are developer-defined key-value pairs. Tagging Amazon Web Services resources is useful for resource management, access management and cost allocation. See Tagging Amazon Web Services Resources in the Amazon Web Services General Reference. You can use TagResource to add tags, UntagResource to remove tags, and ListTagsForResource to view tags on existing resources.

Source

pub fn set_tags(self, input: Option<HashMap<String, String>>) -> Self

A list of labels to assign to the new stream group resource. Tags are developer-defined key-value pairs. Tagging Amazon Web Services resources is useful for resource management, access management and cost allocation. See Tagging Amazon Web Services Resources in the Amazon Web Services General Reference. You can use TagResource to add tags, UntagResource to remove tags, and ListTagsForResource to view tags on existing resources.

Source

pub fn get_tags(&self) -> &Option<HashMap<String, String>>

A list of labels to assign to the new stream group resource. Tags are developer-defined key-value pairs. Tagging Amazon Web Services resources is useful for resource management, access management and cost allocation. See Tagging Amazon Web Services Resources in the Amazon Web Services General Reference. You can use TagResource to add tags, UntagResource to remove tags, and ListTagsForResource to view tags on existing resources.

Source

pub fn client_token(self, input: impl Into<String>) -> Self

A unique identifier that represents a client request. The request is idempotent, which ensures that an API request completes only once. When users send a request, Amazon GameLift Streams automatically populates this field.

Source

pub fn set_client_token(self, input: Option<String>) -> Self

A unique identifier that represents a client request. The request is idempotent, which ensures that an API request completes only once. When users send a request, Amazon GameLift Streams automatically populates this field.

Source

pub fn get_client_token(&self) -> &Option<String>

A unique identifier that represents a client request. The request is idempotent, which ensures that an API request completes only once. When users send a request, Amazon GameLift Streams automatically populates this field.

Trait Implementations§

Source§

impl Clone for CreateStreamGroupFluentBuilder

Source§

fn clone(&self) -> CreateStreamGroupFluentBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for CreateStreamGroupFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more