pub struct CreateBuildFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateBuild.
Creates a new Amazon GameLift Servers build resource for your game server binary files. Combine game server binaries into a zip file for use with Amazon GameLift Servers.
When setting up a new game build for Amazon GameLift Servers, we recommend using the CLI command upload-build . This helper command combines two tasks: (1) it uploads your build files from a file directory to an Amazon GameLift Servers Amazon S3 location, and (2) it creates a new build resource.
You can use the CreateBuild operation in the following scenarios:
-
Create a new game build with build files that are in an Amazon S3 location under an Amazon Web Services account that you control. To use this option, you give Amazon GameLift Servers access to the Amazon S3 bucket. With permissions in place, specify a build name, operating system, and the Amazon S3 storage location of your game build.
-
Upload your build files to a Amazon GameLift Servers Amazon S3 location. To use this option, specify a build name and operating system. This operation creates a new build resource and also returns an Amazon S3 location with temporary access credentials. Use the credentials to manually upload your build files to the specified Amazon S3 location. For more information, see Uploading Objects in the Amazon S3 Developer Guide. After you upload build files to the Amazon GameLift Servers Amazon S3 location, you can't update them.
If successful, this operation creates a new build resource with a unique build ID and places it in INITIALIZED status. A build must be in READY status before you can create fleets with it.
Learn more
Implementations§
Source§impl CreateBuildFluentBuilder
impl CreateBuildFluentBuilder
Sourcepub fn as_input(&self) -> &CreateBuildInputBuilder
pub fn as_input(&self) -> &CreateBuildInputBuilder
Access the CreateBuild as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateBuildOutput, SdkError<CreateBuildError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateBuildOutput, SdkError<CreateBuildError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateBuildOutput, CreateBuildError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateBuildOutput, CreateBuildError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
A descriptive label that is associated with a build. Build names do not need to be unique. You can change this value later.
Sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
A descriptive label that is associated with a build. Build names do not need to be unique. You can change this value later.
Sourcepub fn get_name(&self) -> &Option<String>
pub fn get_name(&self) -> &Option<String>
A descriptive label that is associated with a build. Build names do not need to be unique. You can change this value later.
Sourcepub fn version(self, input: impl Into<String>) -> Self
pub fn version(self, input: impl Into<String>) -> Self
Version information that is associated with a build or script. Version strings do not need to be unique. You can change this value later.
Sourcepub fn set_version(self, input: Option<String>) -> Self
pub fn set_version(self, input: Option<String>) -> Self
Version information that is associated with a build or script. Version strings do not need to be unique. You can change this value later.
Sourcepub fn get_version(&self) -> &Option<String>
pub fn get_version(&self) -> &Option<String>
Version information that is associated with a build or script. Version strings do not need to be unique. You can change this value later.
Sourcepub fn storage_location(self, input: S3Location) -> Self
pub fn storage_location(self, input: S3Location) -> Self
Information indicating where your game build files are stored. Use this parameter only when creating a build with files stored in an Amazon S3 bucket that you own. The storage location must specify an Amazon S3 bucket name and key. The location must also specify a role ARN that you set up to allow Amazon GameLift Servers to access your Amazon S3 bucket. The S3 bucket and your new build must be in the same Region.
If a StorageLocation is specified, the size of your file can be found in your Amazon S3 bucket. Amazon GameLift Servers will report a SizeOnDisk of 0.
Sourcepub fn set_storage_location(self, input: Option<S3Location>) -> Self
pub fn set_storage_location(self, input: Option<S3Location>) -> Self
Information indicating where your game build files are stored. Use this parameter only when creating a build with files stored in an Amazon S3 bucket that you own. The storage location must specify an Amazon S3 bucket name and key. The location must also specify a role ARN that you set up to allow Amazon GameLift Servers to access your Amazon S3 bucket. The S3 bucket and your new build must be in the same Region.
If a StorageLocation is specified, the size of your file can be found in your Amazon S3 bucket. Amazon GameLift Servers will report a SizeOnDisk of 0.
Sourcepub fn get_storage_location(&self) -> &Option<S3Location>
pub fn get_storage_location(&self) -> &Option<S3Location>
Information indicating where your game build files are stored. Use this parameter only when creating a build with files stored in an Amazon S3 bucket that you own. The storage location must specify an Amazon S3 bucket name and key. The location must also specify a role ARN that you set up to allow Amazon GameLift Servers to access your Amazon S3 bucket. The S3 bucket and your new build must be in the same Region.
If a StorageLocation is specified, the size of your file can be found in your Amazon S3 bucket. Amazon GameLift Servers will report a SizeOnDisk of 0.
Sourcepub fn operating_system(self, input: OperatingSystem) -> Self
pub fn operating_system(self, input: OperatingSystem) -> Self
The operating system that your game server binaries run on. This value determines the type of fleet resources that you use for this build. If your game build contains multiple executables, they all must run on the same operating system. You must specify a valid operating system in this request. There is no default value. You can't change a build's operating system later.
Amazon Linux 2 (AL2) will reach end of support on 6/30/2025. See more details in the Amazon Linux 2 FAQs. For game servers that are hosted on AL2 and use server SDK version 4.x for Amazon GameLift Servers, first update the game server build to server SDK 5.x, and then deploy to AL2023 instances. See Migrate to server SDK version 5.
Sourcepub fn set_operating_system(self, input: Option<OperatingSystem>) -> Self
pub fn set_operating_system(self, input: Option<OperatingSystem>) -> Self
The operating system that your game server binaries run on. This value determines the type of fleet resources that you use for this build. If your game build contains multiple executables, they all must run on the same operating system. You must specify a valid operating system in this request. There is no default value. You can't change a build's operating system later.
Amazon Linux 2 (AL2) will reach end of support on 6/30/2025. See more details in the Amazon Linux 2 FAQs. For game servers that are hosted on AL2 and use server SDK version 4.x for Amazon GameLift Servers, first update the game server build to server SDK 5.x, and then deploy to AL2023 instances. See Migrate to server SDK version 5.
Sourcepub fn get_operating_system(&self) -> &Option<OperatingSystem>
pub fn get_operating_system(&self) -> &Option<OperatingSystem>
The operating system that your game server binaries run on. This value determines the type of fleet resources that you use for this build. If your game build contains multiple executables, they all must run on the same operating system. You must specify a valid operating system in this request. There is no default value. You can't change a build's operating system later.
Amazon Linux 2 (AL2) will reach end of support on 6/30/2025. See more details in the Amazon Linux 2 FAQs. For game servers that are hosted on AL2 and use server SDK version 4.x for Amazon GameLift Servers, first update the game server build to server SDK 5.x, and then deploy to AL2023 instances. See Migrate to server SDK version 5.
Appends an item to Tags.
To override the contents of this collection use set_tags.
A list of labels to assign to the new build resource. Tags are developer defined key-value pairs. Tagging Amazon Web Services resources are useful for resource management, access management and cost allocation. For more information, see Tagging Amazon Web Services Resources in the Amazon Web Services General Reference. Once the resource is created, you can use TagResource, UntagResource, and ListTagsForResource to add, remove, and view tags. The maximum tag limit may be lower than stated. See the Amazon Web Services General Reference for actual tagging limits.
A list of labels to assign to the new build resource. Tags are developer defined key-value pairs. Tagging Amazon Web Services resources are useful for resource management, access management and cost allocation. For more information, see Tagging Amazon Web Services Resources in the Amazon Web Services General Reference. Once the resource is created, you can use TagResource, UntagResource, and ListTagsForResource to add, remove, and view tags. The maximum tag limit may be lower than stated. See the Amazon Web Services General Reference for actual tagging limits.
A list of labels to assign to the new build resource. Tags are developer defined key-value pairs. Tagging Amazon Web Services resources are useful for resource management, access management and cost allocation. For more information, see Tagging Amazon Web Services Resources in the Amazon Web Services General Reference. Once the resource is created, you can use TagResource, UntagResource, and ListTagsForResource to add, remove, and view tags. The maximum tag limit may be lower than stated. See the Amazon Web Services General Reference for actual tagging limits.
Sourcepub fn server_sdk_version(self, input: impl Into<String>) -> Self
pub fn server_sdk_version(self, input: impl Into<String>) -> Self
A server SDK version you used when integrating your game server build with Amazon GameLift Servers. For more information see Integrate games with custom game servers. By default Amazon GameLift Servers sets this value to 4.0.2.
Sourcepub fn set_server_sdk_version(self, input: Option<String>) -> Self
pub fn set_server_sdk_version(self, input: Option<String>) -> Self
A server SDK version you used when integrating your game server build with Amazon GameLift Servers. For more information see Integrate games with custom game servers. By default Amazon GameLift Servers sets this value to 4.0.2.
Sourcepub fn get_server_sdk_version(&self) -> &Option<String>
pub fn get_server_sdk_version(&self) -> &Option<String>
A server SDK version you used when integrating your game server build with Amazon GameLift Servers. For more information see Integrate games with custom game servers. By default Amazon GameLift Servers sets this value to 4.0.2.
Trait Implementations§
Source§impl Clone for CreateBuildFluentBuilder
impl Clone for CreateBuildFluentBuilder
Source§fn clone(&self) -> CreateBuildFluentBuilder
fn clone(&self) -> CreateBuildFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateBuildFluentBuilder
impl !RefUnwindSafe for CreateBuildFluentBuilder
impl Send for CreateBuildFluentBuilder
impl Sync for CreateBuildFluentBuilder
impl Unpin for CreateBuildFluentBuilder
impl !UnwindSafe for CreateBuildFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);