#[non_exhaustive]pub struct LustreLogCreateConfiguration {
pub level: Option<LustreAccessAuditLogLevel>,
pub destination: Option<String>,
}
Expand description
The Lustre logging configuration used when creating or updating an Amazon FSx for Lustre file system. An Amazon File Cache is created with Lustre logging enabled by default, with a setting of WARN_ERROR
for the logging events. which can't be changed.
Lustre logging writes the enabled logging events for your file system or cache to Amazon CloudWatch Logs.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.level: Option<LustreAccessAuditLogLevel>
Sets which data repository events are logged by Amazon FSx.
-
WARN_ONLY
- only warning events are logged. -
ERROR_ONLY
- only error events are logged. -
WARN_ERROR
- both warning events and error events are logged. -
DISABLED
- logging of data repository events is turned off.
destination: Option<String>
The Amazon Resource Name (ARN) that specifies the destination of the logs.
The destination can be any Amazon CloudWatch Logs log group ARN, with the following requirements:
-
The destination ARN that you provide must be in the same Amazon Web Services partition, Amazon Web Services Region, and Amazon Web Services account as your Amazon FSx file system.
-
The name of the Amazon CloudWatch Logs log group must begin with the
/aws/fsx
prefix. -
If you do not provide a destination, Amazon FSx will create and use a log stream in the CloudWatch Logs
/aws/fsx/lustre
log group (for Amazon FSx for Lustre) or/aws/fsx/filecache
(for Amazon File Cache). -
If
Destination
is provided and the resource does not exist, the request will fail with aBadRequest
error. -
If
Level
is set toDISABLED
, you cannot specify a destination inDestination
.
Implementations§
Source§impl LustreLogCreateConfiguration
impl LustreLogCreateConfiguration
Sourcepub fn level(&self) -> Option<&LustreAccessAuditLogLevel>
pub fn level(&self) -> Option<&LustreAccessAuditLogLevel>
Sets which data repository events are logged by Amazon FSx.
-
WARN_ONLY
- only warning events are logged. -
ERROR_ONLY
- only error events are logged. -
WARN_ERROR
- both warning events and error events are logged. -
DISABLED
- logging of data repository events is turned off.
Sourcepub fn destination(&self) -> Option<&str>
pub fn destination(&self) -> Option<&str>
The Amazon Resource Name (ARN) that specifies the destination of the logs.
The destination can be any Amazon CloudWatch Logs log group ARN, with the following requirements:
-
The destination ARN that you provide must be in the same Amazon Web Services partition, Amazon Web Services Region, and Amazon Web Services account as your Amazon FSx file system.
-
The name of the Amazon CloudWatch Logs log group must begin with the
/aws/fsx
prefix. -
If you do not provide a destination, Amazon FSx will create and use a log stream in the CloudWatch Logs
/aws/fsx/lustre
log group (for Amazon FSx for Lustre) or/aws/fsx/filecache
(for Amazon File Cache). -
If
Destination
is provided and the resource does not exist, the request will fail with aBadRequest
error. -
If
Level
is set toDISABLED
, you cannot specify a destination inDestination
.
Source§impl LustreLogCreateConfiguration
impl LustreLogCreateConfiguration
Sourcepub fn builder() -> LustreLogCreateConfigurationBuilder
pub fn builder() -> LustreLogCreateConfigurationBuilder
Creates a new builder-style object to manufacture LustreLogCreateConfiguration
.
Trait Implementations§
Source§impl Clone for LustreLogCreateConfiguration
impl Clone for LustreLogCreateConfiguration
Source§fn clone(&self) -> LustreLogCreateConfiguration
fn clone(&self) -> LustreLogCreateConfiguration
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for LustreLogCreateConfiguration
impl Debug for LustreLogCreateConfiguration
Source§impl PartialEq for LustreLogCreateConfiguration
impl PartialEq for LustreLogCreateConfiguration
Source§fn eq(&self, other: &LustreLogCreateConfiguration) -> bool
fn eq(&self, other: &LustreLogCreateConfiguration) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for LustreLogCreateConfiguration
Auto Trait Implementations§
impl Freeze for LustreLogCreateConfiguration
impl RefUnwindSafe for LustreLogCreateConfiguration
impl Send for LustreLogCreateConfiguration
impl Sync for LustreLogCreateConfiguration
impl Unpin for LustreLogCreateConfiguration
impl UnwindSafe for LustreLogCreateConfiguration
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);