#[non_exhaustive]pub struct CreateFileSystemLustreMetadataConfiguration {
pub iops: Option<i32>,
pub mode: Option<MetadataConfigurationMode>,
}
Expand description
The Lustre metadata performance configuration for the creation of an Amazon FSx for Lustre file system using a PERSISTENT_2
deployment type. The configuration uses a Metadata IOPS value to set the maximum rate of metadata disk IOPS supported by the file system.
After creation, the file system supports increasing metadata performance. For more information on Metadata IOPS, see Lustre metadata performance configuration in the Amazon FSx for Lustre User Guide.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.iops: Option<i32>
(USER_PROVISIONED mode only) Specifies the number of Metadata IOPS to provision for the file system. This parameter sets the maximum rate of metadata disk IOPS supported by the file system.
-
For SSD file systems, valid values are
1500
,3000
,6000
,12000
, and multiples of12000
up to a maximum of192000
. -
For Intelligent-Tiering file systems, valid values are
6000
and12000
.
Iops
doesn’t have a default value. If you're using USER_PROVISIONED mode, you can choose to specify a valid value. If you're using AUTOMATIC mode, you cannot specify a value because FSx for Lustre automatically sets the value based on your file system storage capacity.
mode: Option<MetadataConfigurationMode>
The metadata configuration mode for provisioning Metadata IOPS for an FSx for Lustre file system using a PERSISTENT_2
deployment type.
-
In AUTOMATIC mode (supported only on SSD file systems), FSx for Lustre automatically provisions and scales the number of Metadata IOPS for your file system based on your file system storage capacity.
-
In USER_PROVISIONED mode, you specify the number of Metadata IOPS to provision for your file system.
Implementations§
Source§impl CreateFileSystemLustreMetadataConfiguration
impl CreateFileSystemLustreMetadataConfiguration
Sourcepub fn iops(&self) -> Option<i32>
pub fn iops(&self) -> Option<i32>
(USER_PROVISIONED mode only) Specifies the number of Metadata IOPS to provision for the file system. This parameter sets the maximum rate of metadata disk IOPS supported by the file system.
-
For SSD file systems, valid values are
1500
,3000
,6000
,12000
, and multiples of12000
up to a maximum of192000
. -
For Intelligent-Tiering file systems, valid values are
6000
and12000
.
Iops
doesn’t have a default value. If you're using USER_PROVISIONED mode, you can choose to specify a valid value. If you're using AUTOMATIC mode, you cannot specify a value because FSx for Lustre automatically sets the value based on your file system storage capacity.
Sourcepub fn mode(&self) -> Option<&MetadataConfigurationMode>
pub fn mode(&self) -> Option<&MetadataConfigurationMode>
The metadata configuration mode for provisioning Metadata IOPS for an FSx for Lustre file system using a PERSISTENT_2
deployment type.
-
In AUTOMATIC mode (supported only on SSD file systems), FSx for Lustre automatically provisions and scales the number of Metadata IOPS for your file system based on your file system storage capacity.
-
In USER_PROVISIONED mode, you specify the number of Metadata IOPS to provision for your file system.
Source§impl CreateFileSystemLustreMetadataConfiguration
impl CreateFileSystemLustreMetadataConfiguration
Sourcepub fn builder() -> CreateFileSystemLustreMetadataConfigurationBuilder
pub fn builder() -> CreateFileSystemLustreMetadataConfigurationBuilder
Creates a new builder-style object to manufacture CreateFileSystemLustreMetadataConfiguration
.
Trait Implementations§
Source§impl Clone for CreateFileSystemLustreMetadataConfiguration
impl Clone for CreateFileSystemLustreMetadataConfiguration
Source§fn clone(&self) -> CreateFileSystemLustreMetadataConfiguration
fn clone(&self) -> CreateFileSystemLustreMetadataConfiguration
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl PartialEq for CreateFileSystemLustreMetadataConfiguration
impl PartialEq for CreateFileSystemLustreMetadataConfiguration
Source§fn eq(&self, other: &CreateFileSystemLustreMetadataConfiguration) -> bool
fn eq(&self, other: &CreateFileSystemLustreMetadataConfiguration) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for CreateFileSystemLustreMetadataConfiguration
Auto Trait Implementations§
impl Freeze for CreateFileSystemLustreMetadataConfiguration
impl RefUnwindSafe for CreateFileSystemLustreMetadataConfiguration
impl Send for CreateFileSystemLustreMetadataConfiguration
impl Sync for CreateFileSystemLustreMetadataConfiguration
impl Unpin for CreateFileSystemLustreMetadataConfiguration
impl UnwindSafe for CreateFileSystemLustreMetadataConfiguration
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);