#[non_exhaustive]pub struct CreateFileCacheLustreConfiguration {
pub per_unit_storage_throughput: Option<i32>,
pub deployment_type: Option<FileCacheLustreDeploymentType>,
pub weekly_maintenance_start_time: Option<String>,
pub metadata_configuration: Option<FileCacheLustreMetadataConfiguration>,
}
Expand description
The Amazon File Cache configuration for the cache that you are creating.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.per_unit_storage_throughput: Option<i32>
Provisions the amount of read and write throughput for each 1 tebibyte (TiB) of cache storage capacity, in MB/s/TiB. The only supported value is 1000
.
deployment_type: Option<FileCacheLustreDeploymentType>
Specifies the cache deployment type, which must be CACHE_1
.
weekly_maintenance_start_time: Option<String>
The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
For example, 1:05:00
specifies maintenance at 5 AM Monday.
metadata_configuration: Option<FileCacheLustreMetadataConfiguration>
The configuration for a Lustre MDT (Metadata Target) storage volume.
Implementations§
Source§impl CreateFileCacheLustreConfiguration
impl CreateFileCacheLustreConfiguration
Sourcepub fn per_unit_storage_throughput(&self) -> Option<i32>
pub fn per_unit_storage_throughput(&self) -> Option<i32>
Provisions the amount of read and write throughput for each 1 tebibyte (TiB) of cache storage capacity, in MB/s/TiB. The only supported value is 1000
.
Sourcepub fn deployment_type(&self) -> Option<&FileCacheLustreDeploymentType>
pub fn deployment_type(&self) -> Option<&FileCacheLustreDeploymentType>
Specifies the cache deployment type, which must be CACHE_1
.
Sourcepub fn weekly_maintenance_start_time(&self) -> Option<&str>
pub fn weekly_maintenance_start_time(&self) -> Option<&str>
The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
For example, 1:05:00
specifies maintenance at 5 AM Monday.
Sourcepub fn metadata_configuration(
&self,
) -> Option<&FileCacheLustreMetadataConfiguration>
pub fn metadata_configuration( &self, ) -> Option<&FileCacheLustreMetadataConfiguration>
The configuration for a Lustre MDT (Metadata Target) storage volume.
Source§impl CreateFileCacheLustreConfiguration
impl CreateFileCacheLustreConfiguration
Sourcepub fn builder() -> CreateFileCacheLustreConfigurationBuilder
pub fn builder() -> CreateFileCacheLustreConfigurationBuilder
Creates a new builder-style object to manufacture CreateFileCacheLustreConfiguration
.
Trait Implementations§
Source§impl Clone for CreateFileCacheLustreConfiguration
impl Clone for CreateFileCacheLustreConfiguration
Source§fn clone(&self) -> CreateFileCacheLustreConfiguration
fn clone(&self) -> CreateFileCacheLustreConfiguration
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl PartialEq for CreateFileCacheLustreConfiguration
impl PartialEq for CreateFileCacheLustreConfiguration
Source§fn eq(&self, other: &CreateFileCacheLustreConfiguration) -> bool
fn eq(&self, other: &CreateFileCacheLustreConfiguration) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for CreateFileCacheLustreConfiguration
Auto Trait Implementations§
impl Freeze for CreateFileCacheLustreConfiguration
impl RefUnwindSafe for CreateFileCacheLustreConfiguration
impl Send for CreateFileCacheLustreConfiguration
impl Sync for CreateFileCacheLustreConfiguration
impl Unpin for CreateFileCacheLustreConfiguration
impl UnwindSafe for CreateFileCacheLustreConfiguration
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);