#[non_exhaustive]pub struct Backup {Show 17 fields
pub backup_id: Option<String>,
pub lifecycle: Option<BackupLifecycle>,
pub failure_details: Option<BackupFailureDetails>,
pub type: Option<BackupType>,
pub progress_percent: Option<i32>,
pub creation_time: Option<DateTime>,
pub kms_key_id: Option<String>,
pub resource_arn: Option<String>,
pub tags: Option<Vec<Tag>>,
pub file_system: Option<FileSystem>,
pub directory_information: Option<ActiveDirectoryBackupAttributes>,
pub owner_id: Option<String>,
pub source_backup_id: Option<String>,
pub source_backup_region: Option<String>,
pub resource_type: Option<ResourceType>,
pub volume: Option<Volume>,
pub size_in_bytes: Option<i64>,
}Expand description
A backup of an Amazon FSx for Windows File Server, Amazon FSx for Lustre file system, Amazon FSx for NetApp ONTAP volume, or Amazon FSx for OpenZFS file system.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.backup_id: Option<String>The ID of the backup.
lifecycle: Option<BackupLifecycle>The lifecycle status of the backup.
-
AVAILABLE- The backup is fully available. -
PENDING- For user-initiated backups on Lustre file systems only; Amazon FSx hasn't started creating the backup. -
CREATING- Amazon FSx is creating the backup. -
TRANSFERRING- For user-initiated backups on Lustre file systems only; Amazon FSx is transferring the backup to Amazon S3. -
COPYING- Amazon FSx is copying the backup. -
DELETED- Amazon FSx deleted the backup and it's no longer available. -
FAILED- Amazon FSx couldn't finish the backup.
failure_details: Option<BackupFailureDetails>Details explaining any failures that occurred when creating a backup.
type: Option<BackupType>The type of the file-system backup.
progress_percent: Option<i32>Displays the current percent of progress of an asynchronous task.
creation_time: Option<DateTime>The time when a particular backup was created.
kms_key_id: Option<String>The ID of the Key Management Service (KMS) key used to encrypt the backup of the Amazon FSx file system's data at rest.
resource_arn: Option<String>The Amazon Resource Name (ARN) for the backup resource.
The tags associated with a particular file system.
file_system: Option<FileSystem>The metadata of the file system associated with the backup. This metadata is persisted even if the file system is deleted.
directory_information: Option<ActiveDirectoryBackupAttributes>The configuration of the self-managed Microsoft Active Directory directory to which the Windows File Server instance is joined.
owner_id: Option<String>An Amazon Web Services account ID. This ID is a 12-digit number that you use to construct Amazon Resource Names (ARNs) for resources.
source_backup_id: Option<String>The ID of the source backup. Specifies the backup that you are copying.
source_backup_region: Option<String>The source Region of the backup. Specifies the Region from where this backup is copied.
resource_type: Option<ResourceType>Specifies the resource type that's backed up.
volume: Option<Volume>Describes an Amazon FSx volume.
size_in_bytes: Option<i64>The size of the backup in bytes. This represents the amount of data that the file system would contain if you restore this backup.
Implementations§
Source§impl Backup
impl Backup
Sourcepub fn lifecycle(&self) -> Option<&BackupLifecycle>
pub fn lifecycle(&self) -> Option<&BackupLifecycle>
The lifecycle status of the backup.
-
AVAILABLE- The backup is fully available. -
PENDING- For user-initiated backups on Lustre file systems only; Amazon FSx hasn't started creating the backup. -
CREATING- Amazon FSx is creating the backup. -
TRANSFERRING- For user-initiated backups on Lustre file systems only; Amazon FSx is transferring the backup to Amazon S3. -
COPYING- Amazon FSx is copying the backup. -
DELETED- Amazon FSx deleted the backup and it's no longer available. -
FAILED- Amazon FSx couldn't finish the backup.
Sourcepub fn failure_details(&self) -> Option<&BackupFailureDetails>
pub fn failure_details(&self) -> Option<&BackupFailureDetails>
Details explaining any failures that occurred when creating a backup.
Sourcepub fn type(&self) -> Option<&BackupType>
pub fn type(&self) -> Option<&BackupType>
The type of the file-system backup.
Sourcepub fn progress_percent(&self) -> Option<i32>
pub fn progress_percent(&self) -> Option<i32>
Displays the current percent of progress of an asynchronous task.
Sourcepub fn creation_time(&self) -> Option<&DateTime>
pub fn creation_time(&self) -> Option<&DateTime>
The time when a particular backup was created.
Sourcepub fn kms_key_id(&self) -> Option<&str>
pub fn kms_key_id(&self) -> Option<&str>
The ID of the Key Management Service (KMS) key used to encrypt the backup of the Amazon FSx file system's data at rest.
Sourcepub fn resource_arn(&self) -> Option<&str>
pub fn resource_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) for the backup resource.
The tags associated with a particular file system.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().
Sourcepub fn file_system(&self) -> Option<&FileSystem>
pub fn file_system(&self) -> Option<&FileSystem>
The metadata of the file system associated with the backup. This metadata is persisted even if the file system is deleted.
Sourcepub fn directory_information(&self) -> Option<&ActiveDirectoryBackupAttributes>
pub fn directory_information(&self) -> Option<&ActiveDirectoryBackupAttributes>
The configuration of the self-managed Microsoft Active Directory directory to which the Windows File Server instance is joined.
Sourcepub fn owner_id(&self) -> Option<&str>
pub fn owner_id(&self) -> Option<&str>
An Amazon Web Services account ID. This ID is a 12-digit number that you use to construct Amazon Resource Names (ARNs) for resources.
Sourcepub fn source_backup_id(&self) -> Option<&str>
pub fn source_backup_id(&self) -> Option<&str>
The ID of the source backup. Specifies the backup that you are copying.
Sourcepub fn source_backup_region(&self) -> Option<&str>
pub fn source_backup_region(&self) -> Option<&str>
The source Region of the backup. Specifies the Region from where this backup is copied.
Sourcepub fn resource_type(&self) -> Option<&ResourceType>
pub fn resource_type(&self) -> Option<&ResourceType>
Specifies the resource type that's backed up.
Sourcepub fn size_in_bytes(&self) -> Option<i64>
pub fn size_in_bytes(&self) -> Option<i64>
The size of the backup in bytes. This represents the amount of data that the file system would contain if you restore this backup.
Trait Implementations§
impl StructuralPartialEq for Backup
Auto Trait Implementations§
impl Freeze for Backup
impl RefUnwindSafe for Backup
impl Send for Backup
impl Sync for Backup
impl Unpin for Backup
impl UnwindSafe for Backup
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);