aws_sdk_fsx::types::builders

Struct OntapFileSystemConfigurationBuilder

Source 
#[non_exhaustive]
pub struct OntapFileSystemConfigurationBuilder { /* private fields */ }
Expand description

A builder for OntapFileSystemConfiguration.

Implementations§

Source§

impl OntapFileSystemConfigurationBuilder

Source

pub fn automatic_backup_retention_days(self, input: i32) -> Self

The number of days to retain automatic backups. Setting this property to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 30.

Source

pub fn set_automatic_backup_retention_days(self, input: Option<i32>) -> Self

The number of days to retain automatic backups. Setting this property to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 30.

Source

pub fn get_automatic_backup_retention_days(&self) -> &Option<i32>

The number of days to retain automatic backups. Setting this property to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 30.

Source

pub fn daily_automatic_backup_start_time(self, input: impl Into<String>) -> Self

A recurring daily time, in the format HH:MM. HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.

Source

pub fn set_daily_automatic_backup_start_time( self, input: Option<String>, ) -> Self

A recurring daily time, in the format HH:MM. HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.

Source

pub fn get_daily_automatic_backup_start_time(&self) -> &Option<String>

A recurring daily time, in the format HH:MM. HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.

Source

pub fn deployment_type(self, input: OntapDeploymentType) -> Self

Specifies the FSx for ONTAP file system deployment type in use in the file system.

  • MULTI_AZ_1 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. This is a first-generation FSx for ONTAP file system.

  • MULTI_AZ_2 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary AZ unavailability. This is a second-generation FSx for ONTAP file system.

  • SINGLE_AZ_1 - A file system configured for Single-AZ redundancy. This is a first-generation FSx for ONTAP file system.

  • SINGLE_AZ_2 - A file system configured with multiple high-availability (HA) pairs for Single-AZ redundancy. This is a second-generation FSx for ONTAP file system.

For information about the use cases for Multi-AZ and Single-AZ deployments, refer to Choosing Multi-AZ or Single-AZ file system deployment.

Source

pub fn set_deployment_type(self, input: Option<OntapDeploymentType>) -> Self

Specifies the FSx for ONTAP file system deployment type in use in the file system.

  • MULTI_AZ_1 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. This is a first-generation FSx for ONTAP file system.

  • MULTI_AZ_2 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary AZ unavailability. This is a second-generation FSx for ONTAP file system.

  • SINGLE_AZ_1 - A file system configured for Single-AZ redundancy. This is a first-generation FSx for ONTAP file system.

  • SINGLE_AZ_2 - A file system configured with multiple high-availability (HA) pairs for Single-AZ redundancy. This is a second-generation FSx for ONTAP file system.

For information about the use cases for Multi-AZ and Single-AZ deployments, refer to Choosing Multi-AZ or Single-AZ file system deployment.

Source

pub fn get_deployment_type(&self) -> &Option<OntapDeploymentType>

Specifies the FSx for ONTAP file system deployment type in use in the file system.

  • MULTI_AZ_1 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. This is a first-generation FSx for ONTAP file system.

  • MULTI_AZ_2 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary AZ unavailability. This is a second-generation FSx for ONTAP file system.

  • SINGLE_AZ_1 - A file system configured for Single-AZ redundancy. This is a first-generation FSx for ONTAP file system.

  • SINGLE_AZ_2 - A file system configured with multiple high-availability (HA) pairs for Single-AZ redundancy. This is a second-generation FSx for ONTAP file system.

For information about the use cases for Multi-AZ and Single-AZ deployments, refer to Choosing Multi-AZ or Single-AZ file system deployment.

Source

pub fn endpoint_ip_address_range(self, input: impl Into<String>) -> Self

(Multi-AZ only) Specifies the IP address range in which the endpoints to access your file system will be created. By default in the Amazon FSx API, Amazon FSx selects an unused IP address range for you from the 198.19.* range. By default in the Amazon FSx console, Amazon FSx chooses the last 64 IP addresses from the VPC’s primary CIDR range to use as the endpoint IP address range for the file system. You can have overlapping endpoint IP addresses for file systems deployed in the same VPC/route tables.

Source

pub fn set_endpoint_ip_address_range(self, input: Option<String>) -> Self

(Multi-AZ only) Specifies the IP address range in which the endpoints to access your file system will be created. By default in the Amazon FSx API, Amazon FSx selects an unused IP address range for you from the 198.19.* range. By default in the Amazon FSx console, Amazon FSx chooses the last 64 IP addresses from the VPC’s primary CIDR range to use as the endpoint IP address range for the file system. You can have overlapping endpoint IP addresses for file systems deployed in the same VPC/route tables.

Source

pub fn get_endpoint_ip_address_range(&self) -> &Option<String>

(Multi-AZ only) Specifies the IP address range in which the endpoints to access your file system will be created. By default in the Amazon FSx API, Amazon FSx selects an unused IP address range for you from the 198.19.* range. By default in the Amazon FSx console, Amazon FSx chooses the last 64 IP addresses from the VPC’s primary CIDR range to use as the endpoint IP address range for the file system. You can have overlapping endpoint IP addresses for file systems deployed in the same VPC/route tables.

Source

pub fn endpoints(self, input: FileSystemEndpoints) -> Self

The Management and Intercluster endpoints that are used to access data or to manage the file system using the NetApp ONTAP CLI, REST API, or NetApp SnapMirror.

Source

pub fn set_endpoints(self, input: Option<FileSystemEndpoints>) -> Self

The Management and Intercluster endpoints that are used to access data or to manage the file system using the NetApp ONTAP CLI, REST API, or NetApp SnapMirror.

Source

pub fn get_endpoints(&self) -> &Option<FileSystemEndpoints>

The Management and Intercluster endpoints that are used to access data or to manage the file system using the NetApp ONTAP CLI, REST API, or NetApp SnapMirror.

Source

pub fn disk_iops_configuration(self, input: DiskIopsConfiguration) -> Self

The SSD IOPS configuration for the ONTAP file system, specifying the number of provisioned IOPS and the provision mode.

Source

pub fn set_disk_iops_configuration( self, input: Option<DiskIopsConfiguration>, ) -> Self

The SSD IOPS configuration for the ONTAP file system, specifying the number of provisioned IOPS and the provision mode.

Source

pub fn get_disk_iops_configuration(&self) -> &Option<DiskIopsConfiguration>

The SSD IOPS configuration for the ONTAP file system, specifying the number of provisioned IOPS and the provision mode.

Source

pub fn preferred_subnet_id(self, input: impl Into<String>) -> Self

The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and subnets in the Amazon VPC User Guide.

Source

pub fn set_preferred_subnet_id(self, input: Option<String>) -> Self

The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and subnets in the Amazon VPC User Guide.

Source

pub fn get_preferred_subnet_id(&self) -> &Option<String>

The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and subnets in the Amazon VPC User Guide.

Source

pub fn route_table_ids(self, input: impl Into<String>) -> Self

Appends an item to route_table_ids.

To override the contents of this collection use set_route_table_ids.

(Multi-AZ only) The VPC route tables in which your file system's endpoints are created.

Source

pub fn set_route_table_ids(self, input: Option<Vec<String>>) -> Self

(Multi-AZ only) The VPC route tables in which your file system's endpoints are created.

Source

pub fn get_route_table_ids(&self) -> &Option<Vec<String>>

(Multi-AZ only) The VPC route tables in which your file system's endpoints are created.

Source

pub fn throughput_capacity(self, input: i32) -> Self

The sustained throughput of an Amazon FSx file system in Megabytes per second (MBps).

Source

pub fn set_throughput_capacity(self, input: Option<i32>) -> Self

The sustained throughput of an Amazon FSx file system in Megabytes per second (MBps).

Source

pub fn get_throughput_capacity(&self) -> &Option<i32>

The sustained throughput of an Amazon FSx file system in Megabytes per second (MBps).

Source

pub fn weekly_maintenance_start_time(self, input: impl Into<String>) -> Self

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.

For example, 1:05:00 specifies maintenance at 5 AM Monday.

Source

pub fn set_weekly_maintenance_start_time(self, input: Option<String>) -> Self

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.

For example, 1:05:00 specifies maintenance at 5 AM Monday.

Source

pub fn get_weekly_maintenance_start_time(&self) -> &Option<String>

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.

For example, 1:05:00 specifies maintenance at 5 AM Monday.

Source

pub fn fsx_admin_password(self, input: impl Into<String>) -> Self

You can use the fsxadmin user account to access the NetApp ONTAP CLI and REST API. The password value is always redacted in the response.

Source

pub fn set_fsx_admin_password(self, input: Option<String>) -> Self

You can use the fsxadmin user account to access the NetApp ONTAP CLI and REST API. The password value is always redacted in the response.

Source

pub fn get_fsx_admin_password(&self) -> &Option<String>

You can use the fsxadmin user account to access the NetApp ONTAP CLI and REST API. The password value is always redacted in the response.

Source

pub fn ha_pairs(self, input: i32) -> Self

Specifies how many high-availability (HA) file server pairs the file system will have. The default value is 1. The value of this property affects the values of StorageCapacity, Iops, and ThroughputCapacity. For more information, see High-availability (HA) pairs in the FSx for ONTAP user guide.

Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:

  • The value of HAPairs is less than 1 or greater than 12.

  • The value of HAPairs is greater than 1 and the value of DeploymentType is SINGLE_AZ_1, MULTI_AZ_1, or MULTI_AZ_2.

Source

pub fn set_ha_pairs(self, input: Option<i32>) -> Self

Specifies how many high-availability (HA) file server pairs the file system will have. The default value is 1. The value of this property affects the values of StorageCapacity, Iops, and ThroughputCapacity. For more information, see High-availability (HA) pairs in the FSx for ONTAP user guide.

Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:

  • The value of HAPairs is less than 1 or greater than 12.

  • The value of HAPairs is greater than 1 and the value of DeploymentType is SINGLE_AZ_1, MULTI_AZ_1, or MULTI_AZ_2.

Source

pub fn get_ha_pairs(&self) -> &Option<i32>

Specifies how many high-availability (HA) file server pairs the file system will have. The default value is 1. The value of this property affects the values of StorageCapacity, Iops, and ThroughputCapacity. For more information, see High-availability (HA) pairs in the FSx for ONTAP user guide.

Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:

  • The value of HAPairs is less than 1 or greater than 12.

  • The value of HAPairs is greater than 1 and the value of DeploymentType is SINGLE_AZ_1, MULTI_AZ_1, or MULTI_AZ_2.

Source

pub fn throughput_capacity_per_ha_pair(self, input: i32) -> Self

Use to choose the throughput capacity per HA pair. When the value of HAPairs is equal to 1, the value of ThroughputCapacityPerHAPair is the total throughput for the file system.

This field and ThroughputCapacity cannot be defined in the same API call, but one is required.

This field and ThroughputCapacity are the same for file systems with one HA pair.

  • For SINGLE_AZ_1 and MULTI_AZ_1 file systems, valid values are 128, 256, 512, 1024, 2048, or 4096 MBps.

  • For SINGLE_AZ_2, valid values are 1536, 3072, or 6144 MBps.

  • For MULTI_AZ_2, valid values are 384, 768, 1536, 3072, or 6144 MBps.

Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:

  • The value of ThroughputCapacity and ThroughputCapacityPerHAPair are not the same value.

  • The value of deployment type is SINGLE_AZ_2 and ThroughputCapacity / ThroughputCapacityPerHAPair is not a valid HA pair (a value between 1 and 12).

  • The value of ThroughputCapacityPerHAPair is not a valid value.

Source

pub fn set_throughput_capacity_per_ha_pair(self, input: Option<i32>) -> Self

Use to choose the throughput capacity per HA pair. When the value of HAPairs is equal to 1, the value of ThroughputCapacityPerHAPair is the total throughput for the file system.

This field and ThroughputCapacity cannot be defined in the same API call, but one is required.

This field and ThroughputCapacity are the same for file systems with one HA pair.

  • For SINGLE_AZ_1 and MULTI_AZ_1 file systems, valid values are 128, 256, 512, 1024, 2048, or 4096 MBps.

  • For SINGLE_AZ_2, valid values are 1536, 3072, or 6144 MBps.

  • For MULTI_AZ_2, valid values are 384, 768, 1536, 3072, or 6144 MBps.

Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:

  • The value of ThroughputCapacity and ThroughputCapacityPerHAPair are not the same value.

  • The value of deployment type is SINGLE_AZ_2 and ThroughputCapacity / ThroughputCapacityPerHAPair is not a valid HA pair (a value between 1 and 12).

  • The value of ThroughputCapacityPerHAPair is not a valid value.

Source

pub fn get_throughput_capacity_per_ha_pair(&self) -> &Option<i32>

Use to choose the throughput capacity per HA pair. When the value of HAPairs is equal to 1, the value of ThroughputCapacityPerHAPair is the total throughput for the file system.

This field and ThroughputCapacity cannot be defined in the same API call, but one is required.

This field and ThroughputCapacity are the same for file systems with one HA pair.

  • For SINGLE_AZ_1 and MULTI_AZ_1 file systems, valid values are 128, 256, 512, 1024, 2048, or 4096 MBps.

  • For SINGLE_AZ_2, valid values are 1536, 3072, or 6144 MBps.

  • For MULTI_AZ_2, valid values are 384, 768, 1536, 3072, or 6144 MBps.

Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:

  • The value of ThroughputCapacity and ThroughputCapacityPerHAPair are not the same value.

  • The value of deployment type is SINGLE_AZ_2 and ThroughputCapacity / ThroughputCapacityPerHAPair is not a valid HA pair (a value between 1 and 12).

  • The value of ThroughputCapacityPerHAPair is not a valid value.

Source

pub fn build(self) -> OntapFileSystemConfiguration

Consumes the builder and constructs a OntapFileSystemConfiguration.

Trait Implementations§

Source§

impl Clone for OntapFileSystemConfigurationBuilder

Source§

fn clone(&self) -> OntapFileSystemConfigurationBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for OntapFileSystemConfigurationBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for OntapFileSystemConfigurationBuilder

Source§

fn default() -> OntapFileSystemConfigurationBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for OntapFileSystemConfigurationBuilder

Source§

fn eq(&self, other: &OntapFileSystemConfigurationBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for OntapFileSystemConfigurationBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,