Struct UpdateFileSystemLustreMetadataConfigurationBuilder

Source

#[non_exhaustive]
pub struct UpdateFileSystemLustreMetadataConfigurationBuilder { /* private fields */ }

Expand description

A builder for UpdateFileSystemLustreMetadataConfiguration.

Implementations§

Source §

impl UpdateFileSystemLustreMetadataConfigurationBuilder

Source

pub fn iops(self, input: i32) -> Self

(USER_PROVISIONED mode only) Specifies the number of Metadata IOPS to provision for your file system.

For SSD file systems, valid values are 1500, 3000, 6000, 12000, and multiples of 12000 up to a maximum of 192000.
For Intelligent-Tiering file systems, valid values are 6000 and 12000.

The value you provide must be greater than or equal to the current number of Metadata IOPS provisioned for the file system.

Source

pub fn set_iops(self, input: Option<i32>) -> Self

(USER_PROVISIONED mode only) Specifies the number of Metadata IOPS to provision for your file system.

For SSD file systems, valid values are 1500, 3000, 6000, 12000, and multiples of 12000 up to a maximum of 192000.
For Intelligent-Tiering file systems, valid values are 6000 and 12000.

The value you provide must be greater than or equal to the current number of Metadata IOPS provisioned for the file system.

Source

pub fn get_iops(&self) -> &Option<i32>

(USER_PROVISIONED mode only) Specifies the number of Metadata IOPS to provision for your file system.

For SSD file systems, valid values are 1500, 3000, 6000, 12000, and multiples of 12000 up to a maximum of 192000.
For Intelligent-Tiering file systems, valid values are 6000 and 12000.

The value you provide must be greater than or equal to the current number of Metadata IOPS provisioned for the file system.

Source

pub fn mode(self, input: MetadataConfigurationMode) -> Self

The metadata configuration mode for provisioning Metadata IOPS for an FSx for Lustre file system using a PERSISTENT_2 deployment type.

To increase the Metadata IOPS or to switch an SSD file system from AUTOMATIC, specify USER_PROVISIONED as the value for this parameter. Then use the Iops parameter to provide a Metadata IOPS value that is greater than or equal to the current number of Metadata IOPS provisioned for the file system.
To switch from USER_PROVISIONED mode on an SSD file system, specify AUTOMATIC as the value for this parameter, but do not input a value for Iops.
- If you request to switch from USER_PROVISIONED to AUTOMATIC mode and the current Metadata IOPS value is greater than the automated default, FSx for Lustre rejects the request because downscaling Metadata IOPS is not supported.
- AUTOMATIC mode is not supported on Intelligent-Tiering file systems. For Intelligent-Tiering file systems, use USER_PROVISIONED mode.

Source

pub fn set_mode(self, input: Option<MetadataConfigurationMode>) -> Self

The metadata configuration mode for provisioning Metadata IOPS for an FSx for Lustre file system using a PERSISTENT_2 deployment type.

To increase the Metadata IOPS or to switch an SSD file system from AUTOMATIC, specify USER_PROVISIONED as the value for this parameter. Then use the Iops parameter to provide a Metadata IOPS value that is greater than or equal to the current number of Metadata IOPS provisioned for the file system.
To switch from USER_PROVISIONED mode on an SSD file system, specify AUTOMATIC as the value for this parameter, but do not input a value for Iops.
- If you request to switch from USER_PROVISIONED to AUTOMATIC mode and the current Metadata IOPS value is greater than the automated default, FSx for Lustre rejects the request because downscaling Metadata IOPS is not supported.
- AUTOMATIC mode is not supported on Intelligent-Tiering file systems. For Intelligent-Tiering file systems, use USER_PROVISIONED mode.

Source

pub fn get_mode(&self) -> &Option<MetadataConfigurationMode>

The metadata configuration mode for provisioning Metadata IOPS for an FSx for Lustre file system using a PERSISTENT_2 deployment type.

To increase the Metadata IOPS or to switch an SSD file system from AUTOMATIC, specify USER_PROVISIONED as the value for this parameter. Then use the Iops parameter to provide a Metadata IOPS value that is greater than or equal to the current number of Metadata IOPS provisioned for the file system.
To switch from USER_PROVISIONED mode on an SSD file system, specify AUTOMATIC as the value for this parameter, but do not input a value for Iops.
- If you request to switch from USER_PROVISIONED to AUTOMATIC mode and the current Metadata IOPS value is greater than the automated default, FSx for Lustre rejects the request because downscaling Metadata IOPS is not supported.
- AUTOMATIC mode is not supported on Intelligent-Tiering file systems. For Intelligent-Tiering file systems, use USER_PROVISIONED mode.

Source

pub fn build(self) -> UpdateFileSystemLustreMetadataConfiguration

Consumes the builder and constructs a UpdateFileSystemLustreMetadataConfiguration.

Trait Implementations§

Source §

impl Clone for UpdateFileSystemLustreMetadataConfigurationBuilder

Source §

fn clone(&self) -> UpdateFileSystemLustreMetadataConfigurationBuilder

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

Source §

impl Debug for UpdateFileSystemLustreMetadataConfigurationBuilder

Source §

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Source §

impl Default for UpdateFileSystemLustreMetadataConfigurationBuilder

Source §

fn default() -> UpdateFileSystemLustreMetadataConfigurationBuilder

Returns the “default value” for a type. Read more

Source §

impl PartialEq for UpdateFileSystemLustreMetadataConfigurationBuilder

Source §

fn eq(&self, other: &UpdateFileSystemLustreMetadataConfigurationBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Source §

impl StructuralPartialEq for UpdateFileSystemLustreMetadataConfigurationBuilder

Auto Trait Implementations§

§

impl UnwindSafe for UpdateFileSystemLustreMetadataConfigurationBuilder

Blanket Implementations§

Source §

impl<T> Any for T
where T: 'static + ?Sized,

Source §

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

Source §

impl<T> Borrow<T> for T
where T: ?Sized,

Source §

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

Source §

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source §

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

Source §

impl<T> CloneToUninit for T
where T: Clone,

Source §

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

Source §

impl<T> From<T> for T

Source §

fn from(t: T) -> T

Returns the argument unchanged.

Source §

impl<T> Instrument for T

Source §

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Source §

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Source §

impl<T, U> Into for T
where U: From<T>,

Source §

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source §

impl<T> IntoEither for T

Source §

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source §

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

Source §

impl<T> Paint for T
where T: ?Sized,

Source §

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

Source §

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example

println!("{}", value.primary());

Source §

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example

println!("{}", value.fixed(color));

Source §

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example

println!("{}", value.rgb(r, g, b));

Source §

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example

println!("{}", value.black());

Source §

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example

println!("{}", value.red());

Source §

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example

println!("{}", value.green());

Source §

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example

println!("{}", value.yellow());

Source §

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example

println!("{}", value.blue());

Source §

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example

println!("{}", value.magenta());

Source §

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example

println!("{}", value.cyan());

Source §

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example

println!("{}", value.white());

Source §

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example

println!("{}", value.bright_black());

Source §

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example

println!("{}", value.bright_red());

Source §

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example

println!("{}", value.bright_green());

Source §

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example

println!("{}", value.bright_yellow());

Source §

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example

println!("{}", value.bright_blue());

Source §

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.bright_magenta());

Source §

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example

println!("{}", value.bright_cyan());

Source §

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example

println!("{}", value.bright_white());

Source §

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

Source §

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example

println!("{}", value.on_primary());

Source §

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example

println!("{}", value.on_fixed(color));

Source §

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

Source §

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example

println!("{}", value.on_black());

Source §

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example

println!("{}", value.on_red());

Source §

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example

println!("{}", value.on_green());

Source §

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example

println!("{}", value.on_yellow());

Source §

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example

println!("{}", value.on_blue());

Source §

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example

println!("{}", value.on_magenta());

Source §

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example

println!("{}", value.on_cyan());

Source §

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example

println!("{}", value.on_white());

Source §

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example

println!("{}", value.on_bright_black());

Source §

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example

println!("{}", value.on_bright_red());

Source §

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example

println!("{}", value.on_bright_green());

Source §

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

Source §

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example

println!("{}", value.on_bright_blue());

Source §

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

Source §

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

Source §

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example

println!("{}", value.on_bright_white());

Source §

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

Source §

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example

println!("{}", value.bold());

Source §

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example

println!("{}", value.dim());

Source §

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example

println!("{}", value.italic());

Source §

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example

println!("{}", value.underline());

Source §

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Blink].

§Example

println!("{}", value.blink());

Source §

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example

println!("{}", value.rapid_blink());

Source §

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example

println!("{}", value.invert());

Source §

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example

println!("{}", value.conceal());

Source §

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example

println!("{}", value.strike());

Source §

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

Source §

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example

println!("{}", value.mask());

Source §

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example

println!("{}", value.wrap());

Source §

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example

println!("{}", value.linger());

Source §

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example

println!("{}", value.clear());

Source §

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example

println!("{}", value.resetting());

Source §

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example

println!("{}", value.bright());

Source §

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example

println!("{}", value.on_bright());

Source §

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

Source §

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

Source §

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

Source §

impl<T> Same for T

Source §

type Output = T

Should always be Self

Source §

impl<T> ToOwned for T
where T: Clone,

Source §

type Owned = T

The resulting type after obtaining ownership.

Source §

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

Source §

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

Source §

impl<T, U> TryFrom for T
where U: Into<T>,

Source §

type Error = Infallible

The type returned in the event of a conversion error.

Source §

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

Source §

impl<T, U> TryInto for T
where U: TryFrom<T>,

Source §

type Error = >::Error

The type returned in the event of a conversion error.

Source §

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Source §

impl<T> WithSubscriber for T

Source §

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

UpdateFileSystemLustreMetadataConfigurationBuilder

Struct UpdateFileSystemLustreMetadataConfigurationBuilder Copy item path

Implementations§

impl UpdateFileSystemLustreMetadataConfigurationBuilder

pub fn iops(self, input: i32) -> Self

pub fn set_iops(self, input: Option<i32>) -> Self

pub fn get_iops(&self) -> &Option<i32>

pub fn mode(self, input: MetadataConfigurationMode) -> Self

pub fn set_mode(self, input: Option<MetadataConfigurationMode>) -> Self

pub fn get_mode(&self) -> &Option<MetadataConfigurationMode>

pub fn build(self) -> UpdateFileSystemLustreMetadataConfiguration

Trait Implementations§

impl Clone for UpdateFileSystemLustreMetadataConfigurationBuilder

fn clone(&self) -> UpdateFileSystemLustreMetadataConfigurationBuilder

fn clone_from(&mut self, source: &Self)

impl Debug for UpdateFileSystemLustreMetadataConfigurationBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Default for UpdateFileSystemLustreMetadataConfigurationBuilder

fn default() -> UpdateFileSystemLustreMetadataConfigurationBuilder

impl PartialEq for UpdateFileSystemLustreMetadataConfigurationBuilder

fn eq(&self, other: &UpdateFileSystemLustreMetadataConfigurationBuilder) -> bool

fn ne(&self, other: &Rhs) -> bool

impl StructuralPartialEq for UpdateFileSystemLustreMetadataConfigurationBuilder

Auto Trait Implementations§

impl Freeze for UpdateFileSystemLustreMetadataConfigurationBuilder

impl RefUnwindSafe for UpdateFileSystemLustreMetadataConfigurationBuilder

impl Send for UpdateFileSystemLustreMetadataConfigurationBuilder

impl Sync for UpdateFileSystemLustreMetadataConfigurationBuilder

impl Unpin for UpdateFileSystemLustreMetadataConfigurationBuilder

impl UnwindSafe for UpdateFileSystemLustreMetadataConfigurationBuilder

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> CloneToUninit for Twhere T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unsharedwhere Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

impl<T> Paint for Twhere T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

§Example

fn primary(&self) -> Painted<&T>

§Example

fn fixed(&self, color: u8) -> Painted<&T>

§Example

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

§Example

fn black(&self) -> Painted<&T>

§Example

fn red(&self) -> Painted<&T>

§Example

fn green(&self) -> Painted<&T>

§Example

fn yellow(&self) -> Painted<&T>

§Example

fn blue(&self) -> Painted<&T>

§Example

fn magenta(&self) -> Painted<&T>

§Example

fn cyan(&self) -> Painted<&T>

§Example

fn white(&self) -> Painted<&T>

§Example

fn bright_black(&self) -> Painted<&T>

§Example

fn bright_red(&self) -> Painted<&T>

§Example

Struct UpdateFileSystemLustreMetadataConfigurationBuilder

impl<T> Any for T
where T: 'static + ?Sized,

impl<T> Borrow<T> for T
where T: ?Sized,

impl<T> BorrowMut<T> for T
where T: ?Sized,

impl<T> CloneToUninit for T
where T: Clone,

impl<T, U> Into<U> for T
where U: From<T>,

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

impl<T> Paint for T
where T: ?Sized,