#[non_exhaustive]pub struct OntapFileSystemConfiguration {Show 13 fields
pub automatic_backup_retention_days: Option<i32>,
pub daily_automatic_backup_start_time: Option<String>,
pub deployment_type: Option<OntapDeploymentType>,
pub endpoint_ip_address_range: Option<String>,
pub endpoints: Option<FileSystemEndpoints>,
pub disk_iops_configuration: Option<DiskIopsConfiguration>,
pub preferred_subnet_id: Option<String>,
pub route_table_ids: Option<Vec<String>>,
pub throughput_capacity: Option<i32>,
pub weekly_maintenance_start_time: Option<String>,
pub fsx_admin_password: Option<String>,
pub ha_pairs: Option<i32>,
pub throughput_capacity_per_ha_pair: Option<i32>,
}Expand description
Configuration for the FSx for NetApp ONTAP file system.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.automatic_backup_retention_days: Option<i32>The number of days to retain automatic backups. Setting this property to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 30.
daily_automatic_backup_start_time: Option<String>A recurring daily time, in the format HH:MM. HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
deployment_type: Option<OntapDeploymentType>Specifies the FSx for ONTAP file system deployment type in use in the file system.
-
MULTI_AZ_1- A high availability file system configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. This is a first-generation FSx for ONTAP file system. -
MULTI_AZ_2- A high availability file system configured for Multi-AZ redundancy to tolerate temporary AZ unavailability. This is a second-generation FSx for ONTAP file system. -
SINGLE_AZ_1- A file system configured for Single-AZ redundancy. This is a first-generation FSx for ONTAP file system. -
SINGLE_AZ_2- A file system configured with multiple high-availability (HA) pairs for Single-AZ redundancy. This is a second-generation FSx for ONTAP file system.
For information about the use cases for Multi-AZ and Single-AZ deployments, refer to Choosing Multi-AZ or Single-AZ file system deployment.
endpoint_ip_address_range: Option<String>(Multi-AZ only) Specifies the IP address range in which the endpoints to access your file system will be created. By default in the Amazon FSx API, Amazon FSx selects an unused IP address range for you from the 198.19.* range. By default in the Amazon FSx console, Amazon FSx chooses the last 64 IP addresses from the VPC’s primary CIDR range to use as the endpoint IP address range for the file system. You can have overlapping endpoint IP addresses for file systems deployed in the same VPC/route tables.
endpoints: Option<FileSystemEndpoints>The Management and Intercluster endpoints that are used to access data or to manage the file system using the NetApp ONTAP CLI, REST API, or NetApp SnapMirror.
disk_iops_configuration: Option<DiskIopsConfiguration>The SSD IOPS configuration for the ONTAP file system, specifying the number of provisioned IOPS and the provision mode.
preferred_subnet_id: Option<String>The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and subnets in the Amazon VPC User Guide.
route_table_ids: Option<Vec<String>>(Multi-AZ only) The VPC route tables in which your file system's endpoints are created.
throughput_capacity: Option<i32>The sustained throughput of an Amazon FSx file system in Megabytes per second (MBps).
weekly_maintenance_start_time: Option<String>A recurring weekly time, in the format D:HH:MM.
D is the day of the week, for which 1 represents Monday and 7 represents Sunday. For further details, see the ISO-8601 spec as described on Wikipedia.
HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour.
For example, 1:05:00 specifies maintenance at 5 AM Monday.
fsx_admin_password: Option<String>You can use the fsxadmin user account to access the NetApp ONTAP CLI and REST API. The password value is always redacted in the response.
ha_pairs: Option<i32>Specifies how many high-availability (HA) file server pairs the file system will have. The default value is 1. The value of this property affects the values of StorageCapacity, Iops, and ThroughputCapacity. For more information, see High-availability (HA) pairs in the FSx for ONTAP user guide.
Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:
-
The value of
HAPairsis less than 1 or greater than 12. -
The value of
HAPairsis greater than 1 and the value ofDeploymentTypeisSINGLE_AZ_1,MULTI_AZ_1, orMULTI_AZ_2.
throughput_capacity_per_ha_pair: Option<i32>Use to choose the throughput capacity per HA pair. When the value of HAPairs is equal to 1, the value of ThroughputCapacityPerHAPair is the total throughput for the file system.
This field and ThroughputCapacity cannot be defined in the same API call, but one is required.
This field and ThroughputCapacity are the same for file systems with one HA pair.
-
For
SINGLE_AZ_1andMULTI_AZ_1file systems, valid values are 128, 256, 512, 1024, 2048, or 4096 MBps. -
For
SINGLE_AZ_2, valid values are 1536, 3072, or 6144 MBps. -
For
MULTI_AZ_2, valid values are 384, 768, 1536, 3072, or 6144 MBps.
Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:
-
The value of
ThroughputCapacityandThroughputCapacityPerHAPairare not the same value. -
The value of deployment type is
SINGLE_AZ_2andThroughputCapacity/ThroughputCapacityPerHAPairis not a valid HA pair (a value between 1 and 12). -
The value of
ThroughputCapacityPerHAPairis not a valid value.
Implementations§
Source§impl OntapFileSystemConfiguration
impl OntapFileSystemConfiguration
Sourcepub fn automatic_backup_retention_days(&self) -> Option<i32>
pub fn automatic_backup_retention_days(&self) -> Option<i32>
The number of days to retain automatic backups. Setting this property to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 30.
Sourcepub fn daily_automatic_backup_start_time(&self) -> Option<&str>
pub fn daily_automatic_backup_start_time(&self) -> Option<&str>
A recurring daily time, in the format HH:MM. HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
Sourcepub fn deployment_type(&self) -> Option<&OntapDeploymentType>
pub fn deployment_type(&self) -> Option<&OntapDeploymentType>
Specifies the FSx for ONTAP file system deployment type in use in the file system.
-
MULTI_AZ_1- A high availability file system configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. This is a first-generation FSx for ONTAP file system. -
MULTI_AZ_2- A high availability file system configured for Multi-AZ redundancy to tolerate temporary AZ unavailability. This is a second-generation FSx for ONTAP file system. -
SINGLE_AZ_1- A file system configured for Single-AZ redundancy. This is a first-generation FSx for ONTAP file system. -
SINGLE_AZ_2- A file system configured with multiple high-availability (HA) pairs for Single-AZ redundancy. This is a second-generation FSx for ONTAP file system.
For information about the use cases for Multi-AZ and Single-AZ deployments, refer to Choosing Multi-AZ or Single-AZ file system deployment.
Sourcepub fn endpoint_ip_address_range(&self) -> Option<&str>
pub fn endpoint_ip_address_range(&self) -> Option<&str>
(Multi-AZ only) Specifies the IP address range in which the endpoints to access your file system will be created. By default in the Amazon FSx API, Amazon FSx selects an unused IP address range for you from the 198.19.* range. By default in the Amazon FSx console, Amazon FSx chooses the last 64 IP addresses from the VPC’s primary CIDR range to use as the endpoint IP address range for the file system. You can have overlapping endpoint IP addresses for file systems deployed in the same VPC/route tables.
Sourcepub fn endpoints(&self) -> Option<&FileSystemEndpoints>
pub fn endpoints(&self) -> Option<&FileSystemEndpoints>
The Management and Intercluster endpoints that are used to access data or to manage the file system using the NetApp ONTAP CLI, REST API, or NetApp SnapMirror.
Sourcepub fn disk_iops_configuration(&self) -> Option<&DiskIopsConfiguration>
pub fn disk_iops_configuration(&self) -> Option<&DiskIopsConfiguration>
The SSD IOPS configuration for the ONTAP file system, specifying the number of provisioned IOPS and the provision mode.
Sourcepub fn preferred_subnet_id(&self) -> Option<&str>
pub fn preferred_subnet_id(&self) -> Option<&str>
The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and subnets in the Amazon VPC User Guide.
Sourcepub fn route_table_ids(&self) -> &[String]
pub fn route_table_ids(&self) -> &[String]
(Multi-AZ only) The VPC route tables in which your file system's endpoints are created.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .route_table_ids.is_none().
Sourcepub fn throughput_capacity(&self) -> Option<i32>
pub fn throughput_capacity(&self) -> Option<i32>
The sustained throughput of an Amazon FSx file system in Megabytes per second (MBps).
Sourcepub fn weekly_maintenance_start_time(&self) -> Option<&str>
pub fn weekly_maintenance_start_time(&self) -> Option<&str>
A recurring weekly time, in the format D:HH:MM.
D is the day of the week, for which 1 represents Monday and 7 represents Sunday. For further details, see the ISO-8601 spec as described on Wikipedia.
HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour.
For example, 1:05:00 specifies maintenance at 5 AM Monday.
Sourcepub fn fsx_admin_password(&self) -> Option<&str>
pub fn fsx_admin_password(&self) -> Option<&str>
You can use the fsxadmin user account to access the NetApp ONTAP CLI and REST API. The password value is always redacted in the response.
Sourcepub fn ha_pairs(&self) -> Option<i32>
pub fn ha_pairs(&self) -> Option<i32>
Specifies how many high-availability (HA) file server pairs the file system will have. The default value is 1. The value of this property affects the values of StorageCapacity, Iops, and ThroughputCapacity. For more information, see High-availability (HA) pairs in the FSx for ONTAP user guide.
Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:
-
The value of
HAPairsis less than 1 or greater than 12. -
The value of
HAPairsis greater than 1 and the value ofDeploymentTypeisSINGLE_AZ_1,MULTI_AZ_1, orMULTI_AZ_2.
Sourcepub fn throughput_capacity_per_ha_pair(&self) -> Option<i32>
pub fn throughput_capacity_per_ha_pair(&self) -> Option<i32>
Use to choose the throughput capacity per HA pair. When the value of HAPairs is equal to 1, the value of ThroughputCapacityPerHAPair is the total throughput for the file system.
This field and ThroughputCapacity cannot be defined in the same API call, but one is required.
This field and ThroughputCapacity are the same for file systems with one HA pair.
-
For
SINGLE_AZ_1andMULTI_AZ_1file systems, valid values are 128, 256, 512, 1024, 2048, or 4096 MBps. -
For
SINGLE_AZ_2, valid values are 1536, 3072, or 6144 MBps. -
For
MULTI_AZ_2, valid values are 384, 768, 1536, 3072, or 6144 MBps.
Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:
-
The value of
ThroughputCapacityandThroughputCapacityPerHAPairare not the same value. -
The value of deployment type is
SINGLE_AZ_2andThroughputCapacity/ThroughputCapacityPerHAPairis not a valid HA pair (a value between 1 and 12). -
The value of
ThroughputCapacityPerHAPairis not a valid value.
Source§impl OntapFileSystemConfiguration
impl OntapFileSystemConfiguration
Sourcepub fn builder() -> OntapFileSystemConfigurationBuilder
pub fn builder() -> OntapFileSystemConfigurationBuilder
Creates a new builder-style object to manufacture OntapFileSystemConfiguration.
Trait Implementations§
Source§impl Clone for OntapFileSystemConfiguration
impl Clone for OntapFileSystemConfiguration
Source§fn clone(&self) -> OntapFileSystemConfiguration
fn clone(&self) -> OntapFileSystemConfiguration
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for OntapFileSystemConfiguration
impl Debug for OntapFileSystemConfiguration
Source§impl PartialEq for OntapFileSystemConfiguration
impl PartialEq for OntapFileSystemConfiguration
Source§fn eq(&self, other: &OntapFileSystemConfiguration) -> bool
fn eq(&self, other: &OntapFileSystemConfiguration) -> bool
self and other values to be equal, and is used by ==.impl StructuralPartialEq for OntapFileSystemConfiguration
Auto Trait Implementations§
impl Freeze for OntapFileSystemConfiguration
impl RefUnwindSafe for OntapFileSystemConfiguration
impl Send for OntapFileSystemConfiguration
impl Sync for OntapFileSystemConfiguration
impl Unpin for OntapFileSystemConfiguration
impl UnwindSafe for OntapFileSystemConfiguration
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);