Struct aws_sdk_fsx::operation::create_file_system::CreateFileSystemInput

#[non_exhaustive]
pub struct CreateFileSystemInput {

    pub client_request_token: Option<String>,
    pub file_system_type: Option<FileSystemType>,
    pub storage_capacity: Option<i32>,
    pub storage_type: Option<StorageType>,
    pub subnet_ids: Option<Vec<String>>,
    pub security_group_ids: Option<Vec<String>>,
    pub tags: Option<Vec<Tag>>,
    pub kms_key_id: Option<String>,
    pub windows_configuration: Option<CreateFileSystemWindowsConfiguration>,
    pub lustre_configuration: Option<CreateFileSystemLustreConfiguration>,
    pub ontap_configuration: Option<CreateFileSystemOntapConfiguration>,
    pub file_system_type_version: Option<String>,
    pub open_zfs_configuration: Option<CreateFileSystemOpenZfsConfiguration>,
}

The request object used to create a new Amazon FSx file system.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

client_request_token: Option<String>

A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.

file_system_type: Option<FileSystemType>

The type of Amazon FSx file system to create. Valid values are WINDOWS, LUSTRE, ONTAP, and OPENZFS.

storage_capacity: Option<i32>

Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).

FSx for Lustre file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType and the Lustre DeploymentType, as follows:

• For SCRATCH_2, PERSISTENT_2 and PERSISTENT_1 deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.

• For PERSISTENT_1 HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.

• For SCRATCH_1 deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.

FSx for ONTAP file systems - The amount of storage capacity that you can configure depends on the value of the HAPairs property. The minimum value is calculated as 1,024 * HAPairs and the maximum is calculated as 524,288 * HAPairs.

FSx for OpenZFS file systems - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).

FSx for Windows File Server file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType as follows:

• For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).

• For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).

storage_type: Option<StorageType>

Sets the storage type for the file system that you're creating. Valid values are SSD and HDD.

• Set to SSD to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.

• Set to HDD to use hard disk drive storage. HDD is supported on SINGLE_AZ_2 and MULTI_AZ_1 Windows file system deployment types, and on PERSISTENT_1 Lustre file system deployment types.

Default value is SSD. For more information, see Storage type options in the FSx for Windows File Server User Guide and Multiple storage options in the FSx for Lustre User Guide.

subnet_ids: Option<Vec<String>>

Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP MULTI_AZ_1 deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the WindowsConfiguration > PreferredSubnetID or OntapConfiguration > PreferredSubnetID properties. For more information about Multi-AZ file system configuration, see Availability and durability: Single-AZ and Multi-AZ file systems in the Amazon FSx for Windows User Guide and Availability and durability in the Amazon FSx for ONTAP User Guide.

For Windows SINGLE_AZ_1 and SINGLE_AZ_2 and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.

security_group_ids: Option<Vec<String>>

A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.

You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.

tags: Option<Vec<Tag>>

The tags to apply to the file system that's being created. The key value of the Name tag appears in the console as the file system name.

kms_key_id: Option<String>

Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:

• Amazon FSx for Lustre PERSISTENT_1 and PERSISTENT_2 deployment types only.

  SCRATCH_1 and SCRATCH_2 types are encrypted using the Amazon FSx service KMS key for your account.

• Amazon FSx for NetApp ONTAP

• Amazon FSx for OpenZFS

• Amazon FSx for Windows File Server

If a KmsKeyId isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see Encrypt in the Key Management Service API Reference.

windows_configuration: Option<CreateFileSystemWindowsConfiguration>

The Microsoft Windows configuration for the file system that's being created.

lustre_configuration: Option<CreateFileSystemLustreConfiguration>

The Lustre configuration for the file system being created.

The following parameters are not supported for file systems with a data repository association created with .

• AutoImportPolicy

• ExportPath

• ImportedFileChunkSize

• ImportPath

ontap_configuration: Option<CreateFileSystemOntapConfiguration>

The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.

file_system_type_version: Option<String>

(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are 2.10, 2.12, and 2.15:

• 2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.

• 2.12 and 2.15 are supported by all Lustre deployment types. 2.12 or 2.15 is required when setting FSx for Lustre DeploymentType to PERSISTENT_2.

Default value = 2.10, except when DeploymentType is set to PERSISTENT_2, then the default is 2.12.

If you set FileSystemTypeVersion to 2.10 for a PERSISTENT_2 Lustre deployment type, the CreateFileSystem operation fails.

open_zfs_configuration: Option<CreateFileSystemOpenZfsConfiguration>

The OpenZFS configuration for the file system that's being created.

Implementations

impl CreateFileSystemInput

pub fn client_request_token(&self) -> Option<&str>

A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.

pub fn file_system_type(&self) -> Option<&FileSystemType>

The type of Amazon FSx file system to create. Valid values are WINDOWS, LUSTRE, ONTAP, and OPENZFS.

pub fn storage_capacity(&self) -> Option<i32>

Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).

FSx for Lustre file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType and the Lustre DeploymentType, as follows:

• For SCRATCH_2, PERSISTENT_2 and PERSISTENT_1 deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.

• For PERSISTENT_1 HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.

• For SCRATCH_1 deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.

FSx for ONTAP file systems - The amount of storage capacity that you can configure depends on the value of the HAPairs property. The minimum value is calculated as 1,024 * HAPairs and the maximum is calculated as 524,288 * HAPairs.

FSx for OpenZFS file systems - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).

FSx for Windows File Server file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType as follows:

• For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).

• For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).

pub fn storage_type(&self) -> Option<&StorageType>

Sets the storage type for the file system that you're creating. Valid values are SSD and HDD.

• Set to SSD to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.

• Set to HDD to use hard disk drive storage. HDD is supported on SINGLE_AZ_2 and MULTI_AZ_1 Windows file system deployment types, and on PERSISTENT_1 Lustre file system deployment types.

Default value is SSD. For more information, see Storage type options in the FSx for Windows File Server User Guide and Multiple storage options in the FSx for Lustre User Guide.

pub fn subnet_ids(&self) -> &[String]

Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP MULTI_AZ_1 deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the WindowsConfiguration > PreferredSubnetID or OntapConfiguration > PreferredSubnetID properties. For more information about Multi-AZ file system configuration, see Availability and durability: Single-AZ and Multi-AZ file systems in the Amazon FSx for Windows User Guide and Availability and durability in the Amazon FSx for ONTAP User Guide.

For Windows SINGLE_AZ_1 and SINGLE_AZ_2 and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .subnet_ids.is_none().

pub fn security_group_ids(&self) -> &[String]

A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.

You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .security_group_ids.is_none().

pub fn tags(&self) -> &[Tag]

The tags to apply to the file system that's being created. The key value of the Name tag appears in the console as the file system name.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().

pub fn kms_key_id(&self) -> Option<&str>

Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:

• Amazon FSx for Lustre PERSISTENT_1 and PERSISTENT_2 deployment types only.

  SCRATCH_1 and SCRATCH_2 types are encrypted using the Amazon FSx service KMS key for your account.

• Amazon FSx for NetApp ONTAP

• Amazon FSx for OpenZFS

• Amazon FSx for Windows File Server

If a KmsKeyId isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see Encrypt in the Key Management Service API Reference.

pub fn windows_configuration( &self ) -> Option<&CreateFileSystemWindowsConfiguration>

The Microsoft Windows configuration for the file system that's being created.

pub fn lustre_configuration( &self ) -> Option<&CreateFileSystemLustreConfiguration>

The Lustre configuration for the file system being created.

The following parameters are not supported for file systems with a data repository association created with .

• AutoImportPolicy

• ExportPath

• ImportedFileChunkSize

• ImportPath

pub fn ontap_configuration(&self) -> Option<&CreateFileSystemOntapConfiguration>

The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.

pub fn file_system_type_version(&self) -> Option<&str>

(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are 2.10, 2.12, and 2.15:

• 2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.

• 2.12 and 2.15 are supported by all Lustre deployment types. 2.12 or 2.15 is required when setting FSx for Lustre DeploymentType to PERSISTENT_2.

Default value = 2.10, except when DeploymentType is set to PERSISTENT_2, then the default is 2.12.

If you set FileSystemTypeVersion to 2.10 for a PERSISTENT_2 Lustre deployment type, the CreateFileSystem operation fails.

pub fn open_zfs_configuration( &self ) -> Option<&CreateFileSystemOpenZfsConfiguration>

The OpenZFS configuration for the file system that's being created.

impl CreateFileSystemInput

pub fn builder() -> CreateFileSystemInputBuilder

Creates a new builder-style object to manufacture CreateFileSystemInput.

Trait Implementations

impl Clone for CreateFileSystemInput

fn clone(&self) -> CreateFileSystemInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateFileSystemInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for CreateFileSystemInput

fn eq(&self, other: &CreateFileSystemInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CreateFileSystemInput