pub struct CreateAndAttachS3AccessPointFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateAndAttachS3AccessPoint.
Creates an S3 access point and attaches it to an Amazon FSx volume. For FSx for OpenZFS file systems, the volume must be hosted on a high-availability file system, either Single-AZ or Multi-AZ. For more information, see Accessing your data using Amazon S3 access points. in the Amazon FSx for OpenZFS User Guide.
The requester requires the following permissions to perform these actions:
-
fsx:CreateAndAttachS3AccessPoint -
s3:CreateAccessPoint -
s3:GetAccessPoint -
s3:PutAccessPointPolicy -
s3:DeleteAccessPoint
The following actions are related to CreateAndAttachS3AccessPoint:
-
DescribeS3AccessPointAttachments -
DetachAndDeleteS3AccessPoint
Implementations§
Source§impl CreateAndAttachS3AccessPointFluentBuilder
impl CreateAndAttachS3AccessPointFluentBuilder
Sourcepub fn as_input(&self) -> &CreateAndAttachS3AccessPointInputBuilder
pub fn as_input(&self) -> &CreateAndAttachS3AccessPointInputBuilder
Access the CreateAndAttachS3AccessPoint as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateAndAttachS3AccessPointOutput, SdkError<CreateAndAttachS3AccessPointError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateAndAttachS3AccessPointOutput, SdkError<CreateAndAttachS3AccessPointError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateAndAttachS3AccessPointOutput, CreateAndAttachS3AccessPointError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateAndAttachS3AccessPointOutput, CreateAndAttachS3AccessPointError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn client_request_token(self, input: impl Into<String>) -> Self
pub fn client_request_token(self, input: impl Into<String>) -> Self
(Optional) An idempotency token for resource creation, in a string of up to 63 ASCII characters. This token is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.
Sourcepub fn set_client_request_token(self, input: Option<String>) -> Self
pub fn set_client_request_token(self, input: Option<String>) -> Self
(Optional) An idempotency token for resource creation, in a string of up to 63 ASCII characters. This token is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.
Sourcepub fn get_client_request_token(&self) -> &Option<String>
pub fn get_client_request_token(&self) -> &Option<String>
(Optional) An idempotency token for resource creation, in a string of up to 63 ASCII characters. This token is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.
Sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
The name you want to assign to this S3 access point.
Sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
The name you want to assign to this S3 access point.
Sourcepub fn type(self, input: S3AccessPointAttachmentType) -> Self
pub fn type(self, input: S3AccessPointAttachmentType) -> Self
The type of S3 access point you want to create. Only OpenZFS is supported.
Sourcepub fn set_type(self, input: Option<S3AccessPointAttachmentType>) -> Self
pub fn set_type(self, input: Option<S3AccessPointAttachmentType>) -> Self
The type of S3 access point you want to create. Only OpenZFS is supported.
Sourcepub fn get_type(&self) -> &Option<S3AccessPointAttachmentType>
pub fn get_type(&self) -> &Option<S3AccessPointAttachmentType>
The type of S3 access point you want to create. Only OpenZFS is supported.
Sourcepub fn open_zfs_configuration(
self,
input: CreateAndAttachS3AccessPointOpenZfsConfiguration,
) -> Self
pub fn open_zfs_configuration( self, input: CreateAndAttachS3AccessPointOpenZfsConfiguration, ) -> Self
Specifies the configuration to use when creating and attaching an S3 access point to an FSx for OpenZFS volume.
Sourcepub fn set_open_zfs_configuration(
self,
input: Option<CreateAndAttachS3AccessPointOpenZfsConfiguration>,
) -> Self
pub fn set_open_zfs_configuration( self, input: Option<CreateAndAttachS3AccessPointOpenZfsConfiguration>, ) -> Self
Specifies the configuration to use when creating and attaching an S3 access point to an FSx for OpenZFS volume.
Sourcepub fn get_open_zfs_configuration(
&self,
) -> &Option<CreateAndAttachS3AccessPointOpenZfsConfiguration>
pub fn get_open_zfs_configuration( &self, ) -> &Option<CreateAndAttachS3AccessPointOpenZfsConfiguration>
Specifies the configuration to use when creating and attaching an S3 access point to an FSx for OpenZFS volume.
Sourcepub fn s3_access_point(
self,
input: CreateAndAttachS3AccessPointS3Configuration,
) -> Self
pub fn s3_access_point( self, input: CreateAndAttachS3AccessPointS3Configuration, ) -> Self
Specifies the virtual private cloud (VPC) configuration if you're creating an access point that is restricted to a VPC. For more information, see Creating access points restricted to a virtual private cloud.
Sourcepub fn set_s3_access_point(
self,
input: Option<CreateAndAttachS3AccessPointS3Configuration>,
) -> Self
pub fn set_s3_access_point( self, input: Option<CreateAndAttachS3AccessPointS3Configuration>, ) -> Self
Specifies the virtual private cloud (VPC) configuration if you're creating an access point that is restricted to a VPC. For more information, see Creating access points restricted to a virtual private cloud.
Sourcepub fn get_s3_access_point(
&self,
) -> &Option<CreateAndAttachS3AccessPointS3Configuration>
pub fn get_s3_access_point( &self, ) -> &Option<CreateAndAttachS3AccessPointS3Configuration>
Specifies the virtual private cloud (VPC) configuration if you're creating an access point that is restricted to a VPC. For more information, see Creating access points restricted to a virtual private cloud.
Trait Implementations§
Source§impl Clone for CreateAndAttachS3AccessPointFluentBuilder
impl Clone for CreateAndAttachS3AccessPointFluentBuilder
Source§fn clone(&self) -> CreateAndAttachS3AccessPointFluentBuilder
fn clone(&self) -> CreateAndAttachS3AccessPointFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateAndAttachS3AccessPointFluentBuilder
impl !RefUnwindSafe for CreateAndAttachS3AccessPointFluentBuilder
impl Send for CreateAndAttachS3AccessPointFluentBuilder
impl Sync for CreateAndAttachS3AccessPointFluentBuilder
impl Unpin for CreateAndAttachS3AccessPointFluentBuilder
impl !UnwindSafe for CreateAndAttachS3AccessPointFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);