Struct aws_sdk_fsx::model::CreateFileSystemOntapConfiguration

#[non_exhaustive]
pub struct CreateFileSystemOntapConfiguration {
    pub automatic_backup_retention_days: Option<i32>,
    pub daily_automatic_backup_start_time: Option<String>,
    pub deployment_type: Option<OntapDeploymentType>,
    pub endpoint_ip_address_range: Option<String>,
    pub fsx_admin_password: Option<String>,
    pub disk_iops_configuration: Option<DiskIopsConfiguration>,
    pub preferred_subnet_id: Option<String>,
    pub route_table_ids: Option<Vec<String>>,
    pub throughput_capacity: Option<i32>,
    pub weekly_maintenance_start_time: Option<String>,
}

The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

automatic_backup_retention_days: Option<i32>

The number of days to retain automatic backups. Setting this property to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.

daily_automatic_backup_start_time: Option<String>

A recurring daily time, in the format HH:MM. HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.

deployment_type: Option<OntapDeploymentType>

Specifies the FSx for ONTAP file system deployment type to use in creating the file system.

• MULTI_AZ_1 - (Default) A high availability file system configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability.

• SINGLE_AZ_1 - A file system configured for Single-AZ redundancy.

For information about the use cases for Multi-AZ and Single-AZ deployments, refer to Choosing a file system deployment type.

endpoint_ip_address_range: Option<String>

(Multi-AZ only) Specifies the IP address range in which the endpoints to access your file system will be created. By default, Amazon FSx selects an unused IP address range for you from the 198.19.* range.

The Endpoint IP address range you select for your file system must exist outside the VPC's CIDR range and must be at least /30 or larger.

fsx_admin_password: Option<String>

The ONTAP administrative password for the fsxadmin user with which you administer your file system using the NetApp ONTAP CLI and REST API.

disk_iops_configuration: Option<DiskIopsConfiguration>

The SSD IOPS configuration for the FSx for ONTAP file system.

preferred_subnet_id: Option<String>

Required when DeploymentType is set to MULTI_AZ_1. This specifies the subnet in which you want the preferred file server to be located.

route_table_ids: Option<Vec<String>>

(Multi-AZ only) Specifies the virtual private cloud (VPC) route tables in which your file system's endpoints will be created. You should specify all VPC route tables associated with the subnets in which your clients are located. By default, Amazon FSx selects your VPC's default route table.

throughput_capacity: Option<i32>

Sets the throughput capacity for the file system that you're creating. Valid values are 128, 256, 512, 1024, and 2048 MBps.

weekly_maintenance_start_time: Option<String>

A recurring weekly time, in the format D:HH:MM.

D is the day of the week, for which 1 represents Monday and 7 represents Sunday. For further details, see the ISO-8601 spec as described on Wikipedia.

HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour.

For example, 1:05:00 specifies maintenance at 5 AM Monday.

Implementations

impl CreateFileSystemOntapConfiguration

pub fn automatic_backup_retention_days(&self) -> Option<i32>

The number of days to retain automatic backups. Setting this property to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.

pub fn daily_automatic_backup_start_time(&self) -> Option<&str>

A recurring daily time, in the format HH:MM. HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.

pub fn deployment_type(&self) -> Option<&OntapDeploymentType>

Specifies the FSx for ONTAP file system deployment type to use in creating the file system.

• MULTI_AZ_1 - (Default) A high availability file system configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability.

• SINGLE_AZ_1 - A file system configured for Single-AZ redundancy.

For information about the use cases for Multi-AZ and Single-AZ deployments, refer to Choosing a file system deployment type.

pub fn endpoint_ip_address_range(&self) -> Option<&str>

(Multi-AZ only) Specifies the IP address range in which the endpoints to access your file system will be created. By default, Amazon FSx selects an unused IP address range for you from the 198.19.* range.

The Endpoint IP address range you select for your file system must exist outside the VPC's CIDR range and must be at least /30 or larger.

pub fn fsx_admin_password(&self) -> Option<&str>

The ONTAP administrative password for the fsxadmin user with which you administer your file system using the NetApp ONTAP CLI and REST API.

pub fn disk_iops_configuration(&self) -> Option<&DiskIopsConfiguration>

The SSD IOPS configuration for the FSx for ONTAP file system.

pub fn preferred_subnet_id(&self) -> Option<&str>

Required when DeploymentType is set to MULTI_AZ_1. This specifies the subnet in which you want the preferred file server to be located.

pub fn route_table_ids(&self) -> Option<&[String]>

(Multi-AZ only) Specifies the virtual private cloud (VPC) route tables in which your file system's endpoints will be created. You should specify all VPC route tables associated with the subnets in which your clients are located. By default, Amazon FSx selects your VPC's default route table.

pub fn throughput_capacity(&self) -> Option<i32>

Sets the throughput capacity for the file system that you're creating. Valid values are 128, 256, 512, 1024, and 2048 MBps.

pub fn weekly_maintenance_start_time(&self) -> Option<&str>

A recurring weekly time, in the format D:HH:MM.

D is the day of the week, for which 1 represents Monday and 7 represents Sunday. For further details, see the ISO-8601 spec as described on Wikipedia.

HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour.

For example, 1:05:00 specifies maintenance at 5 AM Monday.

impl CreateFileSystemOntapConfiguration

pub fn builder() -> Builder

Creates a new builder-style object to manufacture CreateFileSystemOntapConfiguration

Trait Implementations

impl Clone for CreateFileSystemOntapConfiguration

fn clone(&self) -> CreateFileSystemOntapConfiguration

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateFileSystemOntapConfiguration

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<CreateFileSystemOntapConfiguration> for CreateFileSystemOntapConfiguration

fn eq(&self, other: &CreateFileSystemOntapConfiguration) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &CreateFileSystemOntapConfiguration) -> bool

This method tests for !=.

impl StructuralPartialEq for CreateFileSystemOntapConfiguration