#[non_exhaustive]pub struct IcebergDestinationConfiguration {
pub destination_table_configuration_list: Option<Vec<DestinationTableConfiguration>>,
pub schema_evolution_configuration: Option<SchemaEvolutionConfiguration>,
pub table_creation_configuration: Option<TableCreationConfiguration>,
pub buffering_hints: Option<BufferingHints>,
pub cloud_watch_logging_options: Option<CloudWatchLoggingOptions>,
pub processing_configuration: Option<ProcessingConfiguration>,
pub s3_backup_mode: Option<IcebergS3BackupMode>,
pub retry_options: Option<RetryOptions>,
pub role_arn: String,
pub append_only: Option<bool>,
pub catalog_configuration: Option<CatalogConfiguration>,
pub s3_configuration: Option<S3DestinationConfiguration>,
}Expand description
Specifies the destination configure settings for Apache Iceberg Table.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.destination_table_configuration_list: Option<Vec<DestinationTableConfiguration>>Provides a list of DestinationTableConfigurations which Firehose uses to deliver data to Apache Iceberg Tables. Firehose will write data with insert if table specific configuration is not provided here.
schema_evolution_configuration: Option<SchemaEvolutionConfiguration>The configuration to enable automatic schema evolution.
Amazon Data Firehose is in preview release and is subject to change.
table_creation_configuration: Option<TableCreationConfiguration>The configuration to enable automatic table creation.
Amazon Data Firehose is in preview release and is subject to change.
buffering_hints: Option<BufferingHints>Describes hints for the buffering to perform before delivering data to the destination. These options are treated as hints, and therefore Firehose might choose to use different values when it is optimal. The SizeInMBs and IntervalInSeconds parameters are optional. However, if specify a value for one of them, you must also provide a value for the other.
cloud_watch_logging_options: Option<CloudWatchLoggingOptions>Describes the Amazon CloudWatch logging options for your Firehose stream.
processing_configuration: Option<ProcessingConfiguration>Describes a data processing configuration.
s3_backup_mode: Option<IcebergS3BackupMode>Describes how Firehose will backup records. Currently,S3 backup only supports FailedDataOnly.
retry_options: Option<RetryOptions>The retry behavior in case Firehose is unable to deliver data to a destination.
role_arn: StringThe Amazon Resource Name (ARN) of the IAM role to be assumed by Firehose for calling Apache Iceberg Tables.
append_only: Option<bool>Describes whether all incoming data for this delivery stream will be append only (inserts only and not for updates and deletes) for Iceberg delivery. This feature is only applicable for Apache Iceberg Tables.
The default value is false. If you set this value to true, Firehose automatically increases the throughput limit of a stream based on the throttling levels of the stream. If you set this parameter to true for a stream with updates and deletes, you will see out of order delivery.
catalog_configuration: Option<CatalogConfiguration>Configuration describing where the destination Apache Iceberg Tables are persisted.
s3_configuration: Option<S3DestinationConfiguration>Describes the configuration of a destination in Amazon S3.
Implementations§
Source§impl IcebergDestinationConfiguration
impl IcebergDestinationConfiguration
Sourcepub fn destination_table_configuration_list(
&self,
) -> &[DestinationTableConfiguration]
pub fn destination_table_configuration_list( &self, ) -> &[DestinationTableConfiguration]
Provides a list of DestinationTableConfigurations which Firehose uses to deliver data to Apache Iceberg Tables. Firehose will write data with insert if table specific configuration is not provided here.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .destination_table_configuration_list.is_none().
Sourcepub fn schema_evolution_configuration(
&self,
) -> Option<&SchemaEvolutionConfiguration>
pub fn schema_evolution_configuration( &self, ) -> Option<&SchemaEvolutionConfiguration>
The configuration to enable automatic schema evolution.
Amazon Data Firehose is in preview release and is subject to change.
Sourcepub fn table_creation_configuration(
&self,
) -> Option<&TableCreationConfiguration>
pub fn table_creation_configuration( &self, ) -> Option<&TableCreationConfiguration>
The configuration to enable automatic table creation.
Amazon Data Firehose is in preview release and is subject to change.
Sourcepub fn buffering_hints(&self) -> Option<&BufferingHints>
pub fn buffering_hints(&self) -> Option<&BufferingHints>
Describes hints for the buffering to perform before delivering data to the destination. These options are treated as hints, and therefore Firehose might choose to use different values when it is optimal. The SizeInMBs and IntervalInSeconds parameters are optional. However, if specify a value for one of them, you must also provide a value for the other.
Sourcepub fn cloud_watch_logging_options(&self) -> Option<&CloudWatchLoggingOptions>
pub fn cloud_watch_logging_options(&self) -> Option<&CloudWatchLoggingOptions>
Describes the Amazon CloudWatch logging options for your Firehose stream.
Sourcepub fn processing_configuration(&self) -> Option<&ProcessingConfiguration>
pub fn processing_configuration(&self) -> Option<&ProcessingConfiguration>
Describes a data processing configuration.
Sourcepub fn s3_backup_mode(&self) -> Option<&IcebergS3BackupMode>
pub fn s3_backup_mode(&self) -> Option<&IcebergS3BackupMode>
Describes how Firehose will backup records. Currently,S3 backup only supports FailedDataOnly.
Sourcepub fn retry_options(&self) -> Option<&RetryOptions>
pub fn retry_options(&self) -> Option<&RetryOptions>
The retry behavior in case Firehose is unable to deliver data to a destination.
Sourcepub fn role_arn(&self) -> &str
pub fn role_arn(&self) -> &str
The Amazon Resource Name (ARN) of the IAM role to be assumed by Firehose for calling Apache Iceberg Tables.
Sourcepub fn append_only(&self) -> Option<bool>
pub fn append_only(&self) -> Option<bool>
Describes whether all incoming data for this delivery stream will be append only (inserts only and not for updates and deletes) for Iceberg delivery. This feature is only applicable for Apache Iceberg Tables.
The default value is false. If you set this value to true, Firehose automatically increases the throughput limit of a stream based on the throttling levels of the stream. If you set this parameter to true for a stream with updates and deletes, you will see out of order delivery.
Sourcepub fn catalog_configuration(&self) -> Option<&CatalogConfiguration>
pub fn catalog_configuration(&self) -> Option<&CatalogConfiguration>
Configuration describing where the destination Apache Iceberg Tables are persisted.
Sourcepub fn s3_configuration(&self) -> Option<&S3DestinationConfiguration>
pub fn s3_configuration(&self) -> Option<&S3DestinationConfiguration>
Describes the configuration of a destination in Amazon S3.
Source§impl IcebergDestinationConfiguration
impl IcebergDestinationConfiguration
Sourcepub fn builder() -> IcebergDestinationConfigurationBuilder
pub fn builder() -> IcebergDestinationConfigurationBuilder
Creates a new builder-style object to manufacture IcebergDestinationConfiguration.
Trait Implementations§
Source§impl Clone for IcebergDestinationConfiguration
impl Clone for IcebergDestinationConfiguration
Source§fn clone(&self) -> IcebergDestinationConfiguration
fn clone(&self) -> IcebergDestinationConfiguration
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl PartialEq for IcebergDestinationConfiguration
impl PartialEq for IcebergDestinationConfiguration
Source§fn eq(&self, other: &IcebergDestinationConfiguration) -> bool
fn eq(&self, other: &IcebergDestinationConfiguration) -> bool
self and other values to be equal, and is used by ==.impl StructuralPartialEq for IcebergDestinationConfiguration
Auto Trait Implementations§
impl Freeze for IcebergDestinationConfiguration
impl RefUnwindSafe for IcebergDestinationConfiguration
impl Send for IcebergDestinationConfiguration
impl Sync for IcebergDestinationConfiguration
impl Unpin for IcebergDestinationConfiguration
impl UnwindSafe for IcebergDestinationConfiguration
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);