#[non_exhaustive]pub struct Step {
pub id: Option<String>,
pub name: Option<String>,
pub config: Option<HadoopStepConfig>,
pub action_on_failure: Option<ActionOnFailure>,
pub status: Option<StepStatus>,
pub execution_role_arn: Option<String>,
}Expand description
This represents a step in a cluster.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.id: Option<String>The identifier of the cluster step.
name: Option<String>The name of the cluster step.
config: Option<HadoopStepConfig>The Hadoop job configuration of the cluster step.
action_on_failure: Option<ActionOnFailure>The action to take when the cluster step fails. Possible values are TERMINATE_CLUSTER, CANCEL_AND_WAIT, and CONTINUE. TERMINATE_JOB_FLOW is provided for backward compatibility. We recommend using TERMINATE_CLUSTER instead.
If a cluster's StepConcurrencyLevel is greater than 1, do not use AddJobFlowSteps to submit a step with this parameter set to CANCEL_AND_WAIT or TERMINATE_CLUSTER. The step is not submitted and the action fails with a message that the ActionOnFailure setting is not valid.
If you change a cluster's StepConcurrencyLevel to be greater than 1 while a step is running, the ActionOnFailure parameter may not behave as you expect. In this case, for a step that fails with this parameter set to CANCEL_AND_WAIT, pending steps and the running step are not canceled; for a step that fails with this parameter set to TERMINATE_CLUSTER, the cluster does not terminate.
status: Option<StepStatus>The current execution status details of the cluster step.
execution_role_arn: Option<String>The Amazon Resource Name (ARN) of the runtime role for a step on the cluster. The runtime role can be a cross-account IAM role. The runtime role ARN is a combination of account ID, role name, and role type using the following format: arn:partition:service:region:account:resource.
For example, arn:aws:IAM::1234567890:role/ReadOnly is a correctly formatted runtime role ARN.
Implementations§
Source§impl Step
impl Step
Sourcepub fn config(&self) -> Option<&HadoopStepConfig>
pub fn config(&self) -> Option<&HadoopStepConfig>
The Hadoop job configuration of the cluster step.
Sourcepub fn action_on_failure(&self) -> Option<&ActionOnFailure>
pub fn action_on_failure(&self) -> Option<&ActionOnFailure>
The action to take when the cluster step fails. Possible values are TERMINATE_CLUSTER, CANCEL_AND_WAIT, and CONTINUE. TERMINATE_JOB_FLOW is provided for backward compatibility. We recommend using TERMINATE_CLUSTER instead.
If a cluster's StepConcurrencyLevel is greater than 1, do not use AddJobFlowSteps to submit a step with this parameter set to CANCEL_AND_WAIT or TERMINATE_CLUSTER. The step is not submitted and the action fails with a message that the ActionOnFailure setting is not valid.
If you change a cluster's StepConcurrencyLevel to be greater than 1 while a step is running, the ActionOnFailure parameter may not behave as you expect. In this case, for a step that fails with this parameter set to CANCEL_AND_WAIT, pending steps and the running step are not canceled; for a step that fails with this parameter set to TERMINATE_CLUSTER, the cluster does not terminate.
Sourcepub fn status(&self) -> Option<&StepStatus>
pub fn status(&self) -> Option<&StepStatus>
The current execution status details of the cluster step.
Sourcepub fn execution_role_arn(&self) -> Option<&str>
pub fn execution_role_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the runtime role for a step on the cluster. The runtime role can be a cross-account IAM role. The runtime role ARN is a combination of account ID, role name, and role type using the following format: arn:partition:service:region:account:resource.
For example, arn:aws:IAM::1234567890:role/ReadOnly is a correctly formatted runtime role ARN.
Trait Implementations§
impl StructuralPartialEq for Step
Auto Trait Implementations§
impl Freeze for Step
impl RefUnwindSafe for Step
impl Send for Step
impl Sync for Step
impl Unpin for Step
impl UnwindSafe for Step
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);