#[non_exhaustive]pub struct JobFlowInstancesConfig {Show 18 fields
pub master_instance_type: Option<String>,
pub slave_instance_type: Option<String>,
pub instance_count: Option<i32>,
pub instance_groups: Option<Vec<InstanceGroupConfig>>,
pub instance_fleets: Option<Vec<InstanceFleetConfig>>,
pub ec2_key_name: Option<String>,
pub placement: Option<PlacementType>,
pub keep_job_flow_alive_when_no_steps: Option<bool>,
pub termination_protected: Option<bool>,
pub unhealthy_node_replacement: Option<bool>,
pub hadoop_version: Option<String>,
pub ec2_subnet_id: Option<String>,
pub ec2_subnet_ids: Option<Vec<String>>,
pub emr_managed_master_security_group: Option<String>,
pub emr_managed_slave_security_group: Option<String>,
pub service_access_security_group: Option<String>,
pub additional_master_security_groups: Option<Vec<String>>,
pub additional_slave_security_groups: Option<Vec<String>>,
}Expand description
A description of the Amazon EC2 instance on which the cluster (job flow) runs. A valid JobFlowInstancesConfig must contain either InstanceGroups or InstanceFleets. They cannot be used together. You may also have MasterInstanceType, SlaveInstanceType, and InstanceCount (all three must be present), but we don't recommend this configuration.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.master_instance_type: Option<String>The Amazon EC2 instance type of the master node.
slave_instance_type: Option<String>The Amazon EC2 instance type of the core and task nodes.
instance_count: Option<i32>The number of Amazon EC2 instances in the cluster.
instance_groups: Option<Vec<InstanceGroupConfig>>Configuration for the instance groups in a cluster.
instance_fleets: Option<Vec<InstanceFleetConfig>>The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions.
Describes the Amazon EC2 instances and instance configurations for clusters that use the instance fleet configuration.
ec2_key_name: Option<String>The name of the Amazon EC2 key pair that can be used to connect to the master node using SSH as the user called "hadoop."
placement: Option<PlacementType>The Availability Zone in which the cluster runs.
keep_job_flow_alive_when_no_steps: Option<bool>Specifies whether the cluster should remain available after completing all steps. Defaults to false. For more information about configuring cluster termination, see Control Cluster Termination in the EMR Management Guide.
termination_protected: Option<bool>Specifies whether to lock the cluster to prevent the Amazon EC2 instances from being terminated by API call, user intervention, or in the event of a job-flow error.
unhealthy_node_replacement: Option<bool>Indicates whether Amazon EMR should gracefully replace core nodes that have degraded within the cluster.
hadoop_version: Option<String>Applies only to Amazon EMR release versions earlier than 4.0. The Hadoop version for the cluster. Valid inputs are "0.18" (no longer maintained), "0.20" (no longer maintained), "0.20.205" (no longer maintained), "1.0.3", "2.2.0", or "2.4.0". If you do not set this value, the default of 0.18 is used, unless the AmiVersion parameter is set in the RunJobFlow call, in which case the default version of Hadoop for that AMI version is used.
ec2_subnet_id: Option<String>Applies to clusters that use the uniform instance group configuration. To launch the cluster in Amazon Virtual Private Cloud (Amazon VPC), set this parameter to the identifier of the Amazon VPC subnet where you want the cluster to launch. If you do not specify this value and your account supports EC2-Classic, the cluster launches in EC2-Classic.
ec2_subnet_ids: Option<Vec<String>>Applies to clusters that use the instance fleet configuration. When multiple Amazon EC2 subnet IDs are specified, Amazon EMR evaluates them and launches instances in the optimal subnet.
The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions.
emr_managed_master_security_group: Option<String>The identifier of the Amazon EC2 security group for the master node. If you specify EmrManagedMasterSecurityGroup, you must also specify EmrManagedSlaveSecurityGroup.
emr_managed_slave_security_group: Option<String>The identifier of the Amazon EC2 security group for the core and task nodes. If you specify EmrManagedSlaveSecurityGroup, you must also specify EmrManagedMasterSecurityGroup.
service_access_security_group: Option<String>The identifier of the Amazon EC2 security group for the Amazon EMR service to access clusters in VPC private subnets.
additional_master_security_groups: Option<Vec<String>>A list of additional Amazon EC2 security group IDs for the master node.
additional_slave_security_groups: Option<Vec<String>>A list of additional Amazon EC2 security group IDs for the core and task nodes.
Implementations§
Source§impl JobFlowInstancesConfig
impl JobFlowInstancesConfig
Sourcepub fn master_instance_type(&self) -> Option<&str>
pub fn master_instance_type(&self) -> Option<&str>
The Amazon EC2 instance type of the master node.
Sourcepub fn slave_instance_type(&self) -> Option<&str>
pub fn slave_instance_type(&self) -> Option<&str>
The Amazon EC2 instance type of the core and task nodes.
Sourcepub fn instance_count(&self) -> Option<i32>
pub fn instance_count(&self) -> Option<i32>
The number of Amazon EC2 instances in the cluster.
Sourcepub fn instance_groups(&self) -> &[InstanceGroupConfig]
pub fn instance_groups(&self) -> &[InstanceGroupConfig]
Configuration for the instance groups in a cluster.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .instance_groups.is_none().
Sourcepub fn instance_fleets(&self) -> &[InstanceFleetConfig]
pub fn instance_fleets(&self) -> &[InstanceFleetConfig]
The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions.
Describes the Amazon EC2 instances and instance configurations for clusters that use the instance fleet configuration.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .instance_fleets.is_none().
Sourcepub fn ec2_key_name(&self) -> Option<&str>
pub fn ec2_key_name(&self) -> Option<&str>
The name of the Amazon EC2 key pair that can be used to connect to the master node using SSH as the user called "hadoop."
Sourcepub fn placement(&self) -> Option<&PlacementType>
pub fn placement(&self) -> Option<&PlacementType>
The Availability Zone in which the cluster runs.
Sourcepub fn keep_job_flow_alive_when_no_steps(&self) -> Option<bool>
pub fn keep_job_flow_alive_when_no_steps(&self) -> Option<bool>
Specifies whether the cluster should remain available after completing all steps. Defaults to false. For more information about configuring cluster termination, see Control Cluster Termination in the EMR Management Guide.
Sourcepub fn termination_protected(&self) -> Option<bool>
pub fn termination_protected(&self) -> Option<bool>
Specifies whether to lock the cluster to prevent the Amazon EC2 instances from being terminated by API call, user intervention, or in the event of a job-flow error.
Sourcepub fn unhealthy_node_replacement(&self) -> Option<bool>
pub fn unhealthy_node_replacement(&self) -> Option<bool>
Indicates whether Amazon EMR should gracefully replace core nodes that have degraded within the cluster.
Sourcepub fn hadoop_version(&self) -> Option<&str>
pub fn hadoop_version(&self) -> Option<&str>
Applies only to Amazon EMR release versions earlier than 4.0. The Hadoop version for the cluster. Valid inputs are "0.18" (no longer maintained), "0.20" (no longer maintained), "0.20.205" (no longer maintained), "1.0.3", "2.2.0", or "2.4.0". If you do not set this value, the default of 0.18 is used, unless the AmiVersion parameter is set in the RunJobFlow call, in which case the default version of Hadoop for that AMI version is used.
Sourcepub fn ec2_subnet_id(&self) -> Option<&str>
pub fn ec2_subnet_id(&self) -> Option<&str>
Applies to clusters that use the uniform instance group configuration. To launch the cluster in Amazon Virtual Private Cloud (Amazon VPC), set this parameter to the identifier of the Amazon VPC subnet where you want the cluster to launch. If you do not specify this value and your account supports EC2-Classic, the cluster launches in EC2-Classic.
Sourcepub fn ec2_subnet_ids(&self) -> &[String]
pub fn ec2_subnet_ids(&self) -> &[String]
Applies to clusters that use the instance fleet configuration. When multiple Amazon EC2 subnet IDs are specified, Amazon EMR evaluates them and launches instances in the optimal subnet.
The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and later, excluding 5.0.x versions.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .ec2_subnet_ids.is_none().
Sourcepub fn emr_managed_master_security_group(&self) -> Option<&str>
pub fn emr_managed_master_security_group(&self) -> Option<&str>
The identifier of the Amazon EC2 security group for the master node. If you specify EmrManagedMasterSecurityGroup, you must also specify EmrManagedSlaveSecurityGroup.
Sourcepub fn emr_managed_slave_security_group(&self) -> Option<&str>
pub fn emr_managed_slave_security_group(&self) -> Option<&str>
The identifier of the Amazon EC2 security group for the core and task nodes. If you specify EmrManagedSlaveSecurityGroup, you must also specify EmrManagedMasterSecurityGroup.
Sourcepub fn service_access_security_group(&self) -> Option<&str>
pub fn service_access_security_group(&self) -> Option<&str>
The identifier of the Amazon EC2 security group for the Amazon EMR service to access clusters in VPC private subnets.
Sourcepub fn additional_master_security_groups(&self) -> &[String]
pub fn additional_master_security_groups(&self) -> &[String]
A list of additional Amazon EC2 security group IDs for the master node.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .additional_master_security_groups.is_none().
Sourcepub fn additional_slave_security_groups(&self) -> &[String]
pub fn additional_slave_security_groups(&self) -> &[String]
A list of additional Amazon EC2 security group IDs for the core and task nodes.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .additional_slave_security_groups.is_none().
Source§impl JobFlowInstancesConfig
impl JobFlowInstancesConfig
Sourcepub fn builder() -> JobFlowInstancesConfigBuilder
pub fn builder() -> JobFlowInstancesConfigBuilder
Creates a new builder-style object to manufacture JobFlowInstancesConfig.
Trait Implementations§
Source§impl Clone for JobFlowInstancesConfig
impl Clone for JobFlowInstancesConfig
Source§fn clone(&self) -> JobFlowInstancesConfig
fn clone(&self) -> JobFlowInstancesConfig
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for JobFlowInstancesConfig
impl Debug for JobFlowInstancesConfig
Source§impl PartialEq for JobFlowInstancesConfig
impl PartialEq for JobFlowInstancesConfig
impl StructuralPartialEq for JobFlowInstancesConfig
Auto Trait Implementations§
impl Freeze for JobFlowInstancesConfig
impl RefUnwindSafe for JobFlowInstancesConfig
impl Send for JobFlowInstancesConfig
impl Sync for JobFlowInstancesConfig
impl Unpin for JobFlowInstancesConfig
impl UnwindSafe for JobFlowInstancesConfig
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);