#[non_exhaustive]pub struct SimpleScalingPolicyConfigurationBuilder { /* private fields */ }Expand description
A builder for SimpleScalingPolicyConfiguration.
Implementations§
source§impl SimpleScalingPolicyConfigurationBuilder
impl SimpleScalingPolicyConfigurationBuilder
sourcepub fn adjustment_type(self, input: AdjustmentType) -> Self
pub fn adjustment_type(self, input: AdjustmentType) -> Self
The way in which Amazon EC2 instances are added (if ScalingAdjustment is a positive number) or terminated (if ScalingAdjustment is a negative number) each time the scaling activity is triggered. CHANGE_IN_CAPACITY is the default. CHANGE_IN_CAPACITY indicates that the Amazon EC2 instance count increments or decrements by ScalingAdjustment, which should be expressed as an integer. PERCENT_CHANGE_IN_CAPACITY indicates the instance count increments or decrements by the percentage specified by ScalingAdjustment, which should be expressed as an integer. For example, 20 indicates an increase in 20% increments of cluster capacity. EXACT_CAPACITY indicates the scaling activity results in an instance group with the number of Amazon EC2 instances specified by ScalingAdjustment, which should be expressed as a positive integer.
sourcepub fn set_adjustment_type(self, input: Option<AdjustmentType>) -> Self
pub fn set_adjustment_type(self, input: Option<AdjustmentType>) -> Self
The way in which Amazon EC2 instances are added (if ScalingAdjustment is a positive number) or terminated (if ScalingAdjustment is a negative number) each time the scaling activity is triggered. CHANGE_IN_CAPACITY is the default. CHANGE_IN_CAPACITY indicates that the Amazon EC2 instance count increments or decrements by ScalingAdjustment, which should be expressed as an integer. PERCENT_CHANGE_IN_CAPACITY indicates the instance count increments or decrements by the percentage specified by ScalingAdjustment, which should be expressed as an integer. For example, 20 indicates an increase in 20% increments of cluster capacity. EXACT_CAPACITY indicates the scaling activity results in an instance group with the number of Amazon EC2 instances specified by ScalingAdjustment, which should be expressed as a positive integer.
sourcepub fn get_adjustment_type(&self) -> &Option<AdjustmentType>
pub fn get_adjustment_type(&self) -> &Option<AdjustmentType>
The way in which Amazon EC2 instances are added (if ScalingAdjustment is a positive number) or terminated (if ScalingAdjustment is a negative number) each time the scaling activity is triggered. CHANGE_IN_CAPACITY is the default. CHANGE_IN_CAPACITY indicates that the Amazon EC2 instance count increments or decrements by ScalingAdjustment, which should be expressed as an integer. PERCENT_CHANGE_IN_CAPACITY indicates the instance count increments or decrements by the percentage specified by ScalingAdjustment, which should be expressed as an integer. For example, 20 indicates an increase in 20% increments of cluster capacity. EXACT_CAPACITY indicates the scaling activity results in an instance group with the number of Amazon EC2 instances specified by ScalingAdjustment, which should be expressed as a positive integer.
sourcepub fn scaling_adjustment(self, input: i32) -> Self
pub fn scaling_adjustment(self, input: i32) -> Self
The amount by which to scale in or scale out, based on the specified AdjustmentType. A positive value adds to the instance group's Amazon EC2 instance count while a negative number removes instances. If AdjustmentType is set to EXACT_CAPACITY, the number should only be a positive integer. If AdjustmentType is set to PERCENT_CHANGE_IN_CAPACITY, the value should express the percentage as an integer. For example, -20 indicates a decrease in 20% increments of cluster capacity.
sourcepub fn set_scaling_adjustment(self, input: Option<i32>) -> Self
pub fn set_scaling_adjustment(self, input: Option<i32>) -> Self
The amount by which to scale in or scale out, based on the specified AdjustmentType. A positive value adds to the instance group's Amazon EC2 instance count while a negative number removes instances. If AdjustmentType is set to EXACT_CAPACITY, the number should only be a positive integer. If AdjustmentType is set to PERCENT_CHANGE_IN_CAPACITY, the value should express the percentage as an integer. For example, -20 indicates a decrease in 20% increments of cluster capacity.
sourcepub fn get_scaling_adjustment(&self) -> &Option<i32>
pub fn get_scaling_adjustment(&self) -> &Option<i32>
The amount by which to scale in or scale out, based on the specified AdjustmentType. A positive value adds to the instance group's Amazon EC2 instance count while a negative number removes instances. If AdjustmentType is set to EXACT_CAPACITY, the number should only be a positive integer. If AdjustmentType is set to PERCENT_CHANGE_IN_CAPACITY, the value should express the percentage as an integer. For example, -20 indicates a decrease in 20% increments of cluster capacity.
sourcepub fn cool_down(self, input: i32) -> Self
pub fn cool_down(self, input: i32) -> Self
The amount of time, in seconds, after a scaling activity completes before any further trigger-related scaling activities can start. The default value is 0.
sourcepub fn set_cool_down(self, input: Option<i32>) -> Self
pub fn set_cool_down(self, input: Option<i32>) -> Self
The amount of time, in seconds, after a scaling activity completes before any further trigger-related scaling activities can start. The default value is 0.
sourcepub fn get_cool_down(&self) -> &Option<i32>
pub fn get_cool_down(&self) -> &Option<i32>
The amount of time, in seconds, after a scaling activity completes before any further trigger-related scaling activities can start. The default value is 0.
sourcepub fn build(self) -> SimpleScalingPolicyConfiguration
pub fn build(self) -> SimpleScalingPolicyConfiguration
Consumes the builder and constructs a SimpleScalingPolicyConfiguration.
Trait Implementations§
source§impl Clone for SimpleScalingPolicyConfigurationBuilder
impl Clone for SimpleScalingPolicyConfigurationBuilder
source§fn clone(&self) -> SimpleScalingPolicyConfigurationBuilder
fn clone(&self) -> SimpleScalingPolicyConfigurationBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moresource§impl Default for SimpleScalingPolicyConfigurationBuilder
impl Default for SimpleScalingPolicyConfigurationBuilder
source§fn default() -> SimpleScalingPolicyConfigurationBuilder
fn default() -> SimpleScalingPolicyConfigurationBuilder
source§impl PartialEq for SimpleScalingPolicyConfigurationBuilder
impl PartialEq for SimpleScalingPolicyConfigurationBuilder
source§fn eq(&self, other: &SimpleScalingPolicyConfigurationBuilder) -> bool
fn eq(&self, other: &SimpleScalingPolicyConfigurationBuilder) -> bool
self and other values to be equal, and is used by ==.impl StructuralPartialEq for SimpleScalingPolicyConfigurationBuilder
Auto Trait Implementations§
impl Freeze for SimpleScalingPolicyConfigurationBuilder
impl RefUnwindSafe for SimpleScalingPolicyConfigurationBuilder
impl Send for SimpleScalingPolicyConfigurationBuilder
impl Sync for SimpleScalingPolicyConfigurationBuilder
impl Unpin for SimpleScalingPolicyConfigurationBuilder
impl UnwindSafe for SimpleScalingPolicyConfigurationBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);