Struct EncryptionBuilder

#[non_exhaustive]
pub struct EncryptionBuilder { /* private fields */ }

A builder for Encryption.

Implementations

impl EncryptionBuilder

pub fn mode(self, input: impl Into<String>) -> Self

The specific server-side encryption mode that you want Elastic Transcoder to use when decrypting your input files or encrypting your output files. Elastic Transcoder supports the following options:

• s3: Amazon S3 creates and manages the keys used for encrypting your files.

• s3-aws-kms: Amazon S3 calls the Amazon Key Management Service, which creates and manages the keys that are used for encrypting your files. If you specify s3-aws-kms and you don't want to use the default key, you must add the AWS-KMS key that you want to use to your pipeline.

• aes-cbc-pkcs7: A padded cipher-block mode of operation originally used for HLS files.

• aes-ctr: AES Counter Mode.

• aes-gcm: AES Galois Counter Mode, a mode of operation that is an authenticated encryption format, meaning that a file, key, or initialization vector that has been tampered with fails the decryption process.

For all three AES options, you must provide the following settings, which must be base64-encoded:

• Key

• Key MD5

• Initialization Vector

For the AES modes, your private encryption keys and your unencrypted data are never stored by AWS; therefore, it is important that you safely manage your encryption keys. If you lose them, you won't be able to unencrypt your data.

pub fn set_mode(self, input: Option<String>) -> Self

The specific server-side encryption mode that you want Elastic Transcoder to use when decrypting your input files or encrypting your output files. Elastic Transcoder supports the following options:

• s3: Amazon S3 creates and manages the keys used for encrypting your files.

• s3-aws-kms: Amazon S3 calls the Amazon Key Management Service, which creates and manages the keys that are used for encrypting your files. If you specify s3-aws-kms and you don't want to use the default key, you must add the AWS-KMS key that you want to use to your pipeline.

• aes-cbc-pkcs7: A padded cipher-block mode of operation originally used for HLS files.

• aes-ctr: AES Counter Mode.

• aes-gcm: AES Galois Counter Mode, a mode of operation that is an authenticated encryption format, meaning that a file, key, or initialization vector that has been tampered with fails the decryption process.

For all three AES options, you must provide the following settings, which must be base64-encoded:

• Key

• Key MD5

• Initialization Vector

For the AES modes, your private encryption keys and your unencrypted data are never stored by AWS; therefore, it is important that you safely manage your encryption keys. If you lose them, you won't be able to unencrypt your data.

pub fn get_mode(&self) -> &Option<String>

The specific server-side encryption mode that you want Elastic Transcoder to use when decrypting your input files or encrypting your output files. Elastic Transcoder supports the following options:

• s3: Amazon S3 creates and manages the keys used for encrypting your files.

• s3-aws-kms: Amazon S3 calls the Amazon Key Management Service, which creates and manages the keys that are used for encrypting your files. If you specify s3-aws-kms and you don't want to use the default key, you must add the AWS-KMS key that you want to use to your pipeline.

• aes-cbc-pkcs7: A padded cipher-block mode of operation originally used for HLS files.

• aes-ctr: AES Counter Mode.

• aes-gcm: AES Galois Counter Mode, a mode of operation that is an authenticated encryption format, meaning that a file, key, or initialization vector that has been tampered with fails the decryption process.

For all three AES options, you must provide the following settings, which must be base64-encoded:

• Key

• Key MD5

• Initialization Vector

For the AES modes, your private encryption keys and your unencrypted data are never stored by AWS; therefore, it is important that you safely manage your encryption keys. If you lose them, you won't be able to unencrypt your data.

pub fn key(self, input: impl Into<String>) -> Self

The data encryption key that you want Elastic Transcoder to use to encrypt your output file, or that was used to encrypt your input file. The key must be base64-encoded and it must be one of the following bit lengths before being base64-encoded:

128, 192, or 256.

The key must also be encrypted by using the Amazon Key Management Service.

pub fn set_key(self, input: Option<String>) -> Self

The data encryption key that you want Elastic Transcoder to use to encrypt your output file, or that was used to encrypt your input file. The key must be base64-encoded and it must be one of the following bit lengths before being base64-encoded:

128, 192, or 256.

The key must also be encrypted by using the Amazon Key Management Service.

pub fn get_key(&self) -> &Option<String>

The data encryption key that you want Elastic Transcoder to use to encrypt your output file, or that was used to encrypt your input file. The key must be base64-encoded and it must be one of the following bit lengths before being base64-encoded:

128, 192, or 256.

The key must also be encrypted by using the Amazon Key Management Service.

pub fn key_md5(self, input: impl Into<String>) -> Self

The MD5 digest of the key that you used to encrypt your input file, or that you want Elastic Transcoder to use to encrypt your output file. Elastic Transcoder uses the key digest as a checksum to make sure your key was not corrupted in transit. The key MD5 must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.

pub fn set_key_md5(self, input: Option<String>) -> Self

The MD5 digest of the key that you used to encrypt your input file, or that you want Elastic Transcoder to use to encrypt your output file. Elastic Transcoder uses the key digest as a checksum to make sure your key was not corrupted in transit. The key MD5 must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.

pub fn get_key_md5(&self) -> &Option<String>

The MD5 digest of the key that you used to encrypt your input file, or that you want Elastic Transcoder to use to encrypt your output file. Elastic Transcoder uses the key digest as a checksum to make sure your key was not corrupted in transit. The key MD5 must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.

pub fn initialization_vector(self, input: impl Into<String>) -> Self

The series of random bits created by a random bit generator, unique for every encryption operation, that you used to encrypt your input files or that you want Elastic Transcoder to use to encrypt your output files. The initialization vector must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.

pub fn set_initialization_vector(self, input: Option<String>) -> Self

The series of random bits created by a random bit generator, unique for every encryption operation, that you used to encrypt your input files or that you want Elastic Transcoder to use to encrypt your output files. The initialization vector must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.

pub fn get_initialization_vector(&self) -> &Option<String>

The series of random bits created by a random bit generator, unique for every encryption operation, that you used to encrypt your input files or that you want Elastic Transcoder to use to encrypt your output files. The initialization vector must be base64-encoded, and it must be exactly 16 bytes long before being base64-encoded.

pub fn build(self) -> Encryption

Consumes the builder and constructs a Encryption.

Trait Implementations

impl Clone for EncryptionBuilder

fn clone(&self) -> EncryptionBuilder

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for EncryptionBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for EncryptionBuilder

fn default() -> EncryptionBuilder

Returns the “default value” for a type.

impl PartialEq for EncryptionBuilder

fn eq(&self, other: &EncryptionBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for EncryptionBuilder