aws_sdk_elasticloadbalancingv2::operation::create_target_group::builders

Struct CreateTargetGroupFluentBuilder

Source 
pub struct CreateTargetGroupFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to CreateTargetGroup.

Creates a target group.

For more information, see the following:

This operation is idempotent, which means that it completes at most one time. If you attempt to create multiple target groups with the same settings, each call succeeds.

Implementations§

Source§

impl CreateTargetGroupFluentBuilder

Source

pub fn as_input(&self) -> &CreateTargetGroupInputBuilder

Access the CreateTargetGroup as a reference.

Source

pub async fn send( self, ) -> Result<CreateTargetGroupOutput, SdkError<CreateTargetGroupError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize( self, ) -> CustomizableOperation<CreateTargetGroupOutput, CreateTargetGroupError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn name(self, input: impl Into<String>) -> Self

The name of the target group.

This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.

Source

pub fn set_name(self, input: Option<String>) -> Self

The name of the target group.

This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.

Source

pub fn get_name(&self) -> &Option<String>

The name of the target group.

This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.

Source

pub fn protocol(self, input: ProtocolEnum) -> Self

The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocols are TCP, TLS, UDP, or TCP_UDP. For Gateway Load Balancers, the supported protocol is GENEVE. A TCP_UDP listener must be associated with a TCP_UDP target group. If the target is a Lambda function, this parameter does not apply.

Source

pub fn set_protocol(self, input: Option<ProtocolEnum>) -> Self

The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocols are TCP, TLS, UDP, or TCP_UDP. For Gateway Load Balancers, the supported protocol is GENEVE. A TCP_UDP listener must be associated with a TCP_UDP target group. If the target is a Lambda function, this parameter does not apply.

Source

pub fn get_protocol(&self) -> &Option<ProtocolEnum>

The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocols are TCP, TLS, UDP, or TCP_UDP. For Gateway Load Balancers, the supported protocol is GENEVE. A TCP_UDP listener must be associated with a TCP_UDP target group. If the target is a Lambda function, this parameter does not apply.

Source

pub fn protocol_version(self, input: impl Into<String>) -> Self

\[HTTP/HTTPS protocol\] The protocol version. Specify GRPC to send requests to targets using gRPC. Specify HTTP2 to send requests to targets using HTTP/2. The default is HTTP1, which sends requests to targets using HTTP/1.1.

Source

pub fn set_protocol_version(self, input: Option<String>) -> Self

\[HTTP/HTTPS protocol\] The protocol version. Specify GRPC to send requests to targets using gRPC. Specify HTTP2 to send requests to targets using HTTP/2. The default is HTTP1, which sends requests to targets using HTTP/1.1.

Source

pub fn get_protocol_version(&self) -> &Option<String>

\[HTTP/HTTPS protocol\] The protocol version. Specify GRPC to send requests to targets using gRPC. Specify HTTP2 to send requests to targets using HTTP/2. The default is HTTP1, which sends requests to targets using HTTP/1.1.

Source

pub fn port(self, input: i32) -> Self

The port on which the targets receive traffic. This port is used unless you specify a port override when registering the target. If the target is a Lambda function, this parameter does not apply. If the protocol is GENEVE, the supported port is 6081.

Source

pub fn set_port(self, input: Option<i32>) -> Self

The port on which the targets receive traffic. This port is used unless you specify a port override when registering the target. If the target is a Lambda function, this parameter does not apply. If the protocol is GENEVE, the supported port is 6081.

Source

pub fn get_port(&self) -> &Option<i32>

The port on which the targets receive traffic. This port is used unless you specify a port override when registering the target. If the target is a Lambda function, this parameter does not apply. If the protocol is GENEVE, the supported port is 6081.

Source

pub fn vpc_id(self, input: impl Into<String>) -> Self

The identifier of the virtual private cloud (VPC). If the target is a Lambda function, this parameter does not apply. Otherwise, this parameter is required.

Source

pub fn set_vpc_id(self, input: Option<String>) -> Self

The identifier of the virtual private cloud (VPC). If the target is a Lambda function, this parameter does not apply. Otherwise, this parameter is required.

Source

pub fn get_vpc_id(&self) -> &Option<String>

The identifier of the virtual private cloud (VPC). If the target is a Lambda function, this parameter does not apply. Otherwise, this parameter is required.

Source

pub fn health_check_protocol(self, input: ProtocolEnum) -> Self

The protocol the load balancer uses when performing health checks on targets. For Application Load Balancers, the default is HTTP. For Network Load Balancers and Gateway Load Balancers, the default is TCP. The TCP protocol is not supported for health checks if the protocol of the target group is HTTP or HTTPS. The GENEVE, TLS, UDP, and TCP_UDP protocols are not supported for health checks.

Source

pub fn set_health_check_protocol(self, input: Option<ProtocolEnum>) -> Self

The protocol the load balancer uses when performing health checks on targets. For Application Load Balancers, the default is HTTP. For Network Load Balancers and Gateway Load Balancers, the default is TCP. The TCP protocol is not supported for health checks if the protocol of the target group is HTTP or HTTPS. The GENEVE, TLS, UDP, and TCP_UDP protocols are not supported for health checks.

Source

pub fn get_health_check_protocol(&self) -> &Option<ProtocolEnum>

The protocol the load balancer uses when performing health checks on targets. For Application Load Balancers, the default is HTTP. For Network Load Balancers and Gateway Load Balancers, the default is TCP. The TCP protocol is not supported for health checks if the protocol of the target group is HTTP or HTTPS. The GENEVE, TLS, UDP, and TCP_UDP protocols are not supported for health checks.

Source

pub fn health_check_port(self, input: impl Into<String>) -> Self

The port the load balancer uses when performing health checks on targets. If the protocol is HTTP, HTTPS, TCP, TLS, UDP, or TCP_UDP, the default is traffic-port, which is the port on which each target receives traffic from the load balancer. If the protocol is GENEVE, the default is port 80.

Source

pub fn set_health_check_port(self, input: Option<String>) -> Self

The port the load balancer uses when performing health checks on targets. If the protocol is HTTP, HTTPS, TCP, TLS, UDP, or TCP_UDP, the default is traffic-port, which is the port on which each target receives traffic from the load balancer. If the protocol is GENEVE, the default is port 80.

Source

pub fn get_health_check_port(&self) -> &Option<String>

The port the load balancer uses when performing health checks on targets. If the protocol is HTTP, HTTPS, TCP, TLS, UDP, or TCP_UDP, the default is traffic-port, which is the port on which each target receives traffic from the load balancer. If the protocol is GENEVE, the default is port 80.

Source

pub fn health_check_enabled(self, input: bool) -> Self

Indicates whether health checks are enabled. If the target type is lambda, health checks are disabled by default but can be enabled. If the target type is instance, ip, or alb, health checks are always enabled and can't be disabled.

Source

pub fn set_health_check_enabled(self, input: Option<bool>) -> Self

Indicates whether health checks are enabled. If the target type is lambda, health checks are disabled by default but can be enabled. If the target type is instance, ip, or alb, health checks are always enabled and can't be disabled.

Source

pub fn get_health_check_enabled(&self) -> &Option<bool>

Indicates whether health checks are enabled. If the target type is lambda, health checks are disabled by default but can be enabled. If the target type is instance, ip, or alb, health checks are always enabled and can't be disabled.

Source

pub fn health_check_path(self, input: impl Into<String>) -> Self

\[HTTP/HTTPS health checks\] The destination for health checks on the targets.

\[HTTP1 or HTTP2 protocol version\] The ping path. The default is /.

\[GRPC protocol version\] The path of a custom health check method with the format /package.service/method. The default is /Amazon Web Services.ALB/healthcheck.

Source

pub fn set_health_check_path(self, input: Option<String>) -> Self

\[HTTP/HTTPS health checks\] The destination for health checks on the targets.

\[HTTP1 or HTTP2 protocol version\] The ping path. The default is /.

\[GRPC protocol version\] The path of a custom health check method with the format /package.service/method. The default is /Amazon Web Services.ALB/healthcheck.

Source

pub fn get_health_check_path(&self) -> &Option<String>

\[HTTP/HTTPS health checks\] The destination for health checks on the targets.

\[HTTP1 or HTTP2 protocol version\] The ping path. The default is /.

\[GRPC protocol version\] The path of a custom health check method with the format /package.service/method. The default is /Amazon Web Services.ALB/healthcheck.

Source

pub fn health_check_interval_seconds(self, input: i32) -> Self

The approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300. If the target group protocol is TCP, TLS, UDP, TCP_UDP, HTTP or HTTPS, the default is 30 seconds. If the target group protocol is GENEVE, the default is 10 seconds. If the target type is lambda, the default is 35 seconds.

Source

pub fn set_health_check_interval_seconds(self, input: Option<i32>) -> Self

The approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300. If the target group protocol is TCP, TLS, UDP, TCP_UDP, HTTP or HTTPS, the default is 30 seconds. If the target group protocol is GENEVE, the default is 10 seconds. If the target type is lambda, the default is 35 seconds.

Source

pub fn get_health_check_interval_seconds(&self) -> &Option<i32>

The approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300. If the target group protocol is TCP, TLS, UDP, TCP_UDP, HTTP or HTTPS, the default is 30 seconds. If the target group protocol is GENEVE, the default is 10 seconds. If the target type is lambda, the default is 35 seconds.

Source

pub fn health_check_timeout_seconds(self, input: i32) -> Self

The amount of time, in seconds, during which no response from a target means a failed health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For target groups with a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with a protocol of GENEVE, the default is 5 seconds. If the target type is lambda, the default is 30 seconds.

Source

pub fn set_health_check_timeout_seconds(self, input: Option<i32>) -> Self

The amount of time, in seconds, during which no response from a target means a failed health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For target groups with a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with a protocol of GENEVE, the default is 5 seconds. If the target type is lambda, the default is 30 seconds.

Source

pub fn get_health_check_timeout_seconds(&self) -> &Option<i32>

The amount of time, in seconds, during which no response from a target means a failed health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For target groups with a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with a protocol of GENEVE, the default is 5 seconds. If the target type is lambda, the default is 30 seconds.

Source

pub fn healthy_threshold_count(self, input: i32) -> Self

The number of consecutive health check successes required before considering a target healthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 5. For target groups with a protocol of GENEVE, the default is 5. If the target type is lambda, the default is 5.

Source

pub fn set_healthy_threshold_count(self, input: Option<i32>) -> Self

The number of consecutive health check successes required before considering a target healthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 5. For target groups with a protocol of GENEVE, the default is 5. If the target type is lambda, the default is 5.

Source

pub fn get_healthy_threshold_count(&self) -> &Option<i32>

The number of consecutive health check successes required before considering a target healthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 5. For target groups with a protocol of GENEVE, the default is 5. If the target type is lambda, the default is 5.

Source

pub fn unhealthy_threshold_count(self, input: i32) -> Self

The number of consecutive health check failures required before considering a target unhealthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 2. For target groups with a protocol of GENEVE, the default is 2. If the target type is lambda, the default is 5.

Source

pub fn set_unhealthy_threshold_count(self, input: Option<i32>) -> Self

The number of consecutive health check failures required before considering a target unhealthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 2. For target groups with a protocol of GENEVE, the default is 2. If the target type is lambda, the default is 5.

Source

pub fn get_unhealthy_threshold_count(&self) -> &Option<i32>

The number of consecutive health check failures required before considering a target unhealthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 2. For target groups with a protocol of GENEVE, the default is 2. If the target type is lambda, the default is 5.

Source

pub fn matcher(self, input: Matcher) -> Self

\[HTTP/HTTPS health checks\] The HTTP or gRPC codes to use when checking for a successful response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target groups with a protocol of GENEVE, the range is 200-399.

Source

pub fn set_matcher(self, input: Option<Matcher>) -> Self

\[HTTP/HTTPS health checks\] The HTTP or gRPC codes to use when checking for a successful response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target groups with a protocol of GENEVE, the range is 200-399.

Source

pub fn get_matcher(&self) -> &Option<Matcher>

\[HTTP/HTTPS health checks\] The HTTP or gRPC codes to use when checking for a successful response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target groups with a protocol of GENEVE, the range is 200-399.

Source

pub fn target_type(self, input: TargetTypeEnum) -> Self

The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type.

  • instance - Register targets by instance ID. This is the default value.

  • ip - Register targets by IP address. You can specify IP addresses from the subnets of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.

  • lambda - Register a single Lambda function as a target.

  • alb - Register a single Application Load Balancer as a target.

Source

pub fn set_target_type(self, input: Option<TargetTypeEnum>) -> Self

The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type.

  • instance - Register targets by instance ID. This is the default value.

  • ip - Register targets by IP address. You can specify IP addresses from the subnets of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.

  • lambda - Register a single Lambda function as a target.

  • alb - Register a single Application Load Balancer as a target.

Source

pub fn get_target_type(&self) -> &Option<TargetTypeEnum>

The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type.

  • instance - Register targets by instance ID. This is the default value.

  • ip - Register targets by IP address. You can specify IP addresses from the subnets of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.

  • lambda - Register a single Lambda function as a target.

  • alb - Register a single Application Load Balancer as a target.

Source

pub fn tags(self, input: Tag) -> Self

Appends an item to Tags.

To override the contents of this collection use set_tags.

The tags to assign to the target group.

Source

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

The tags to assign to the target group.

Source

pub fn get_tags(&self) -> &Option<Vec<Tag>>

The tags to assign to the target group.

Source

pub fn ip_address_type(self, input: TargetGroupIpAddressTypeEnum) -> Self

The IP address type. The default value is ipv4.

Source

pub fn set_ip_address_type( self, input: Option<TargetGroupIpAddressTypeEnum>, ) -> Self

The IP address type. The default value is ipv4.

Source

pub fn get_ip_address_type(&self) -> &Option<TargetGroupIpAddressTypeEnum>

The IP address type. The default value is ipv4.

Trait Implementations§

Source§

impl Clone for CreateTargetGroupFluentBuilder

Source§

fn clone(&self) -> CreateTargetGroupFluentBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for CreateTargetGroupFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,