Struct LoadBalancer

#[non_exhaustive]
pub struct LoadBalancer {

    pub load_balancer_arn: Option<String>,
    pub dns_name: Option<String>,
    pub canonical_hosted_zone_id: Option<String>,
    pub created_time: Option<DateTime>,
    pub load_balancer_name: Option<String>,
    pub scheme: Option<LoadBalancerSchemeEnum>,
    pub vpc_id: Option<String>,
    pub state: Option<LoadBalancerState>,
    pub type: Option<LoadBalancerTypeEnum>,
    pub availability_zones: Option<Vec<AvailabilityZone>>,
    pub security_groups: Option<Vec<String>>,
    pub ip_address_type: Option<IpAddressType>,
    pub customer_owned_ipv4_pool: Option<String>,
    pub enforce_security_group_inbound_rules_on_private_link_traffic: Option<String>,
    pub enable_prefix_for_ipv6_source_nat: Option<EnablePrefixForIpv6SourceNatEnum>,
    pub ipam_pools: Option<IpamPools>,
}

Information about a load balancer.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

load_balancer_arn: Option<String>

The Amazon Resource Name (ARN) of the load balancer.

dns_name: Option<String>

The public DNS name of the load balancer.

canonical_hosted_zone_id: Option<String>

The ID of the Amazon Route 53 hosted zone associated with the load balancer.

created_time: Option<DateTime>

The date and time the load balancer was created.

load_balancer_name: Option<String>

The name of the load balancer.

scheme: Option<LoadBalancerSchemeEnum>

The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.

The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.

vpc_id: Option<String>

The ID of the VPC for the load balancer.

state: Option<LoadBalancerState>

The state of the load balancer.

type: Option<LoadBalancerTypeEnum>

The type of load balancer.

availability_zones: Option<Vec<AvailabilityZone>>

The subnets for the load balancer.

security_groups: Option<Vec<String>>

The IDs of the security groups for the load balancer.

ip_address_type: Option<IpAddressType>

The type of IP addresses used for public or private connections by the subnets attached to your load balancer.

\[Application Load Balancers\] The possible values are ipv4 (IPv4 addresses), dualstack (IPv4 and IPv6 addresses), and dualstack-without-public-ipv4 (public IPv6 addresses and private IPv4 and IPv6 addresses).

\[Network Load Balancers and Gateway Load Balancers\] The possible values are ipv4 (IPv4 addresses) and dualstack (IPv4 and IPv6 addresses).

customer_owned_ipv4_pool: Option<String>

\[Application Load Balancers on Outposts\] The ID of the customer-owned address pool.

enforce_security_group_inbound_rules_on_private_link_traffic: Option<String>

Indicates whether to evaluate inbound security group rules for traffic sent to a Network Load Balancer through Amazon Web Services PrivateLink.

enable_prefix_for_ipv6_source_nat: Option<EnablePrefixForIpv6SourceNatEnum>

\[Network Load Balancers with UDP listeners\] Indicates whether to use an IPv6 prefix from each subnet for source NAT. The IP address type must be dualstack. The default value is off.

ipam_pools: Option<IpamPools>

\[Application Load Balancers\] The IPAM pool in use by the load balancer, if configured.

Implementations

impl LoadBalancer

pub fn load_balancer_arn(&self) -> Option<&str>

The Amazon Resource Name (ARN) of the load balancer.

pub fn dns_name(&self) -> Option<&str>

The public DNS name of the load balancer.

pub fn canonical_hosted_zone_id(&self) -> Option<&str>

The ID of the Amazon Route 53 hosted zone associated with the load balancer.

pub fn created_time(&self) -> Option<&DateTime>

The date and time the load balancer was created.

pub fn load_balancer_name(&self) -> Option<&str>

The name of the load balancer.

pub fn scheme(&self) -> Option<&LoadBalancerSchemeEnum>

The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.

The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.

pub fn vpc_id(&self) -> Option<&str>

The ID of the VPC for the load balancer.

pub fn state(&self) -> Option<&LoadBalancerState>

The state of the load balancer.

pub fn type(&self) -> Option<&LoadBalancerTypeEnum>

The type of load balancer.

pub fn availability_zones(&self) -> &[AvailabilityZone]

The subnets for the load balancer.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .availability_zones.is_none().

pub fn security_groups(&self) -> &[String]

The IDs of the security groups for the load balancer.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .security_groups.is_none().

pub fn ip_address_type(&self) -> Option<&IpAddressType>

The type of IP addresses used for public or private connections by the subnets attached to your load balancer.

\[Application Load Balancers\] The possible values are ipv4 (IPv4 addresses), dualstack (IPv4 and IPv6 addresses), and dualstack-without-public-ipv4 (public IPv6 addresses and private IPv4 and IPv6 addresses).

\[Network Load Balancers and Gateway Load Balancers\] The possible values are ipv4 (IPv4 addresses) and dualstack (IPv4 and IPv6 addresses).

pub fn customer_owned_ipv4_pool(&self) -> Option<&str>

\[Application Load Balancers on Outposts\] The ID of the customer-owned address pool.

pub fn enforce_security_group_inbound_rules_on_private_link_traffic( &self, ) -> Option<&str>

Indicates whether to evaluate inbound security group rules for traffic sent to a Network Load Balancer through Amazon Web Services PrivateLink.

pub fn enable_prefix_for_ipv6_source_nat( &self, ) -> Option<&EnablePrefixForIpv6SourceNatEnum>

\[Network Load Balancers with UDP listeners\] Indicates whether to use an IPv6 prefix from each subnet for source NAT. The IP address type must be dualstack. The default value is off.

pub fn ipam_pools(&self) -> Option<&IpamPools>

\[Application Load Balancers\] The IPAM pool in use by the load balancer, if configured.

impl LoadBalancer

pub fn builder() -> LoadBalancerBuilder

Creates a new builder-style object to manufacture LoadBalancer.

Trait Implementations

impl Clone for LoadBalancer

fn clone(&self) -> LoadBalancer

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for LoadBalancer

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for LoadBalancer

fn eq(&self, other: &LoadBalancer) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for LoadBalancer