aws_sdk_elasticloadbalancingv2::types::builders

Struct TargetHealthBuilder

#[non_exhaustive]
pub struct TargetHealthBuilder { /* private fields */ }

Expand description

A builder for TargetHealth.

Implementations§

Source §

impl TargetHealthBuilder

Source

pub fn state(self, input: TargetHealthStateEnum) -> Self

The state of the target.

Source

pub fn set_state(self, input: Option<TargetHealthStateEnum>) -> Self

The state of the target.

Source

pub fn get_state(&self) -> &Option<TargetHealthStateEnum>

The state of the target.

Source

pub fn reason(self, input: TargetHealthReasonEnum) -> Self

The reason code.

If the target state is healthy, a reason code is not provided.

If the target state is initial, the reason code can be one of the following values:

Elb.RegistrationInProgress - The target is in the process of being registered with the load balancer.
Elb.InitialHealthChecking - The load balancer is still sending the target the minimum number of health checks required to determine its health status.

If the target state is unhealthy, the reason code can be one of the following values:

Target.ResponseCodeMismatch - The health checks did not return an expected HTTP code. Applies only to Application Load Balancers and Gateway Load Balancers.
Target.Timeout - The health check requests timed out. Applies only to Application Load Balancers and Gateway Load Balancers.
Target.FailedHealthChecks - The load balancer received an error while establishing a connection to the target or the target response was malformed.
Elb.InternalError - The health checks failed due to an internal error. Applies only to Application Load Balancers.

If the target state is unused, the reason code can be one of the following values:

Target.NotRegistered - The target is not registered with the target group.
Target.NotInUse - The target group is not used by any load balancer or the target is in an Availability Zone that is not enabled for its load balancer.
Target.InvalidState - The target is in the stopped or terminated state.
Target.IpUnusable - The target IP address is reserved for use by a load balancer.

If the target state is draining, the reason code can be the following value:

Target.DeregistrationInProgress - The target is in the process of being deregistered and the deregistration delay period has not expired.

If the target state is unavailable, the reason code can be the following value:

Target.HealthCheckDisabled - Health checks are disabled for the target group. Applies only to Application Load Balancers.
Elb.InternalError - Target health is unavailable due to an internal error. Applies only to Network Load Balancers.

Source

pub fn set_reason(self, input: Option<TargetHealthReasonEnum>) -> Self

The reason code.

If the target state is healthy, a reason code is not provided.

If the target state is initial, the reason code can be one of the following values:

Elb.RegistrationInProgress - The target is in the process of being registered with the load balancer.
Elb.InitialHealthChecking - The load balancer is still sending the target the minimum number of health checks required to determine its health status.

If the target state is unhealthy, the reason code can be one of the following values:

Target.ResponseCodeMismatch - The health checks did not return an expected HTTP code. Applies only to Application Load Balancers and Gateway Load Balancers.
Target.Timeout - The health check requests timed out. Applies only to Application Load Balancers and Gateway Load Balancers.
Target.FailedHealthChecks - The load balancer received an error while establishing a connection to the target or the target response was malformed.
Elb.InternalError - The health checks failed due to an internal error. Applies only to Application Load Balancers.

If the target state is unused, the reason code can be one of the following values:

Target.NotRegistered - The target is not registered with the target group.
Target.NotInUse - The target group is not used by any load balancer or the target is in an Availability Zone that is not enabled for its load balancer.
Target.InvalidState - The target is in the stopped or terminated state.
Target.IpUnusable - The target IP address is reserved for use by a load balancer.

If the target state is draining, the reason code can be the following value:

Target.DeregistrationInProgress - The target is in the process of being deregistered and the deregistration delay period has not expired.

If the target state is unavailable, the reason code can be the following value:

Target.HealthCheckDisabled - Health checks are disabled for the target group. Applies only to Application Load Balancers.
Elb.InternalError - Target health is unavailable due to an internal error. Applies only to Network Load Balancers.

Source

pub fn get_reason(&self) -> &Option<TargetHealthReasonEnum>

The reason code.

If the target state is healthy, a reason code is not provided.

If the target state is initial, the reason code can be one of the following values:

Elb.RegistrationInProgress - The target is in the process of being registered with the load balancer.
Elb.InitialHealthChecking - The load balancer is still sending the target the minimum number of health checks required to determine its health status.

If the target state is unhealthy, the reason code can be one of the following values:

Target.ResponseCodeMismatch - The health checks did not return an expected HTTP code. Applies only to Application Load Balancers and Gateway Load Balancers.
Target.Timeout - The health check requests timed out. Applies only to Application Load Balancers and Gateway Load Balancers.
Target.FailedHealthChecks - The load balancer received an error while establishing a connection to the target or the target response was malformed.
Elb.InternalError - The health checks failed due to an internal error. Applies only to Application Load Balancers.

If the target state is unused, the reason code can be one of the following values:

Target.NotRegistered - The target is not registered with the target group.
Target.NotInUse - The target group is not used by any load balancer or the target is in an Availability Zone that is not enabled for its load balancer.
Target.InvalidState - The target is in the stopped or terminated state.
Target.IpUnusable - The target IP address is reserved for use by a load balancer.

If the target state is draining, the reason code can be the following value:

Target.DeregistrationInProgress - The target is in the process of being deregistered and the deregistration delay period has not expired.

If the target state is unavailable, the reason code can be the following value:

Target.HealthCheckDisabled - Health checks are disabled for the target group. Applies only to Application Load Balancers.
Elb.InternalError - Target health is unavailable due to an internal error. Applies only to Network Load Balancers.

Source

pub fn description(self, input: impl Into<String>) -> Self

A description of the target health that provides additional details. If the state is healthy, a description is not provided.

Source

pub fn set_description(self, input: Option<String>) -> Self

A description of the target health that provides additional details. If the state is healthy, a description is not provided.

Source

pub fn get_description(&self) -> &Option<String>

A description of the target health that provides additional details. If the state is healthy, a description is not provided.

Source

pub fn build(self) -> TargetHealth

Consumes the builder and constructs a TargetHealth.

Trait Implementations§

Source §

impl Clone for TargetHealthBuilder

Source §

fn clone(&self) -> TargetHealthBuilder

Returns a copy of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

Source §

impl Debug for TargetHealthBuilder

Source §

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Source §

impl Default for TargetHealthBuilder

Source §

fn default() -> TargetHealthBuilder

Returns the “default value” for a type. Read more

Source §

impl PartialEq for TargetHealthBuilder

Source §

fn eq(&self, other: &TargetHealthBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Source §

impl StructuralPartialEq for TargetHealthBuilder

Auto Trait Implementations§

§

impl UnwindSafe for TargetHealthBuilder

Blanket Implementations§

Source §

impl<T> Any for T
where T: 'static + ?Sized,

Source §

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

Source §

impl<T> Borrow<T> for T
where T: ?Sized,

Source §

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

Source §

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source §

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

Source §

impl<T> CloneToUninit for T
where T: Clone,

Source §

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

Source §

impl<T> From<T> for T

Source §

fn from(t: T) -> T

Returns the argument unchanged.

Source §

impl<T> Instrument for T

Source §

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Source §

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Source §

impl<T, U> Into for T
where U: From<T>,

Source §

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source §

impl<T> IntoEither for T

Source §

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source §

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

Source §

impl<T> Paint for T
where T: ?Sized,

Source §

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

Source §

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example

println!("{}", value.primary());

Source §

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example

println!("{}", value.fixed(color));

Source §

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example

println!("{}", value.rgb(r, g, b));

Source §

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example

println!("{}", value.black());

Source §

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example

println!("{}", value.red());

Source §

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example

println!("{}", value.green());

Source §

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example

println!("{}", value.yellow());

Source §

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example

println!("{}", value.blue());

Source §

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example

println!("{}", value.magenta());

Source §

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example

println!("{}", value.cyan());

Source §

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example

println!("{}", value.white());

Source §

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example

println!("{}", value.bright_black());

Source §

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example

println!("{}", value.bright_red());

Source §

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example

println!("{}", value.bright_green());

Source §

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example

println!("{}", value.bright_yellow());

Source §

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example

println!("{}", value.bright_blue());

Source §

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example

println!("{}", value.bright_magenta());

Source §

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example

println!("{}", value.bright_cyan());

Source §

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example

println!("{}", value.bright_white());

Source §

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

Source §

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example

println!("{}", value.on_primary());

Source §

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example

println!("{}", value.on_fixed(color));

Source §

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example

println!("{}", value.on_rgb(r, g, b));

Source §

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example

println!("{}", value.on_black());

Source §

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example

println!("{}", value.on_red());

Source §

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example

println!("{}", value.on_green());

Source §

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example

println!("{}", value.on_yellow());

Source §

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example

println!("{}", value.on_blue());

Source §

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example

println!("{}", value.on_magenta());

Source §

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example

println!("{}", value.on_cyan());

Source §

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example

println!("{}", value.on_white());

Source §

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example

println!("{}", value.on_bright_black());

Source §

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example

println!("{}", value.on_bright_red());

Source §

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example

println!("{}", value.on_bright_green());

Source §

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example

println!("{}", value.on_bright_yellow());

Source §

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example

println!("{}", value.on_bright_blue());

Source §

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example

println!("{}", value.on_bright_magenta());

Source §

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example

println!("{}", value.on_bright_cyan());

Source §

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example

println!("{}", value.on_bright_white());

Source §

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

Source §

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example

println!("{}", value.bold());

Source §

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example

println!("{}", value.dim());

Source §

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example

println!("{}", value.italic());

Source §

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example

println!("{}", value.underline());

Source §

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Blink.

§Example

println!("{}", value.blink());

Source §

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::RapidBlink.

§Example

println!("{}", value.rapid_blink());

Source §

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example

println!("{}", value.invert());

Source §

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example

println!("{}", value.conceal());

Source §

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example

println!("{}", value.strike());

Source §

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

Source §

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example

println!("{}", value.mask());

Source §

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example

println!("{}", value.wrap());

Source §

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example

println!("{}", value.linger());

Source §

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example

println!("{}", value.clear());

Source §

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example

println!("{}", value.resetting());

Source §

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example

println!("{}", value.bright());

Source §

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example

println!("{}", value.on_bright());

Source §

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

Source §

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

Source §

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

Source §

impl<T> Same for T

Source §

type Output = T

Should always be Self

Source §

impl<T> ToOwned for T
where T: Clone,

Source §

type Owned = T

The resulting type after obtaining ownership.

Source §

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

Source §

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

Source §

impl<T, U> TryFrom for T
where U: Into<T>,

Source §

type Error = Infallible

The type returned in the event of a conversion error.

Source §

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

Source §

impl<T, U> TryInto for T
where U: TryFrom<T>,

Source §

type Error = >::Error

The type returned in the event of a conversion error.

Source §

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Source §

impl<T> WithSubscriber for T

Source §

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

impl<T> ErasedDestructor for T
where T: 'static,

Source §

Struct TargetHealthBuilderCopy item path

Implementations§

impl TargetHealthBuilder

pub fn state(self, input: TargetHealthStateEnum) -> Self

pub fn set_state(self, input: Option<TargetHealthStateEnum>) -> Self

pub fn get_state(&self) -> &Option<TargetHealthStateEnum>

pub fn reason(self, input: TargetHealthReasonEnum) -> Self

pub fn set_reason(self, input: Option<TargetHealthReasonEnum>) -> Self

pub fn get_reason(&self) -> &Option<TargetHealthReasonEnum>

pub fn description(self, input: impl Into<String>) -> Self

pub fn set_description(self, input: Option<String>) -> Self

pub fn get_description(&self) -> &Option<String>

pub fn build(self) -> TargetHealth

Trait Implementations§

impl Clone for TargetHealthBuilder

fn clone(&self) -> TargetHealthBuilder

fn clone_from(&mut self, source: &Self)

impl Debug for TargetHealthBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Default for TargetHealthBuilder

fn default() -> TargetHealthBuilder

impl PartialEq for TargetHealthBuilder

fn eq(&self, other: &TargetHealthBuilder) -> bool

fn ne(&self, other: &Rhs) -> bool

impl StructuralPartialEq for TargetHealthBuilder

Auto Trait Implementations§

impl Freeze for TargetHealthBuilder

impl RefUnwindSafe for TargetHealthBuilder

impl Send for TargetHealthBuilder

impl Sync for TargetHealthBuilder

impl Unpin for TargetHealthBuilder

impl UnwindSafe for TargetHealthBuilder

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> CloneToUninit for Twhere T: Clone,

unsafe fn clone_to_uninit(&self, dst: *mut u8)

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unsharedwhere Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

impl<T> Paint for Twhere T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

§Example

fn primary(&self) -> Painted<&T>

§Example

fn fixed(&self, color: u8) -> Painted<&T>

§Example

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

§Example

fn black(&self) -> Painted<&T>

§Example

fn red(&self) -> Painted<&T>

§Example

fn green(&self) -> Painted<&T>

§Example

fn yellow(&self) -> Painted<&T>

§Example

fn blue(&self) -> Painted<&T>

§Example

fn magenta(&self) -> Painted<&T>

§Example

fn cyan(&self) -> Painted<&T>

§Example

fn white(&self) -> Painted<&T>

§Example

fn bright_black(&self) -> Painted<&T>

§Example

Struct TargetHealthBuilder

impl<T> Any for T
where T: 'static + ?Sized,

impl<T> Borrow<T> for T
where T: ?Sized,

impl<T> BorrowMut<T> for T
where T: ?Sized,

impl<T> CloneToUninit for T
where T: Clone,

impl<T, U> Into<U> for T
where U: From<T>,

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

impl<T> Paint for T
where T: ?Sized,