#[non_exhaustive]pub struct SetSubnetsInput {
pub load_balancer_arn: Option<String>,
pub subnets: Option<Vec<String>>,
pub subnet_mappings: Option<Vec<SubnetMapping>>,
pub ip_address_type: Option<IpAddressType>,
pub enable_prefix_for_ipv6_source_nat: Option<EnablePrefixForIpv6SourceNatEnum>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.load_balancer_arn: Option<String>The Amazon Resource Name (ARN) of the load balancer.
subnets: Option<Vec<String>>The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
\[Application Load Balancers\] You must specify subnets from at least two Availability Zones.
\[Application Load Balancers on Outposts\] You must specify one Outpost subnet.
\[Application Load Balancers on Local Zones\] You can specify subnets from one or more Local Zones.
\[Network Load Balancers and Gateway Load Balancers\] You can specify subnets from one or more Availability Zones.
subnet_mappings: Option<Vec<SubnetMapping>>The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
\[Application Load Balancers\] You must specify subnets from at least two Availability Zones. You can't specify Elastic IP addresses for your subnets.
\[Application Load Balancers on Outposts\] You must specify one Outpost subnet.
\[Application Load Balancers on Local Zones\] You can specify subnets from one or more Local Zones.
\[Network Load Balancers\] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.
\[Gateway Load Balancers\] You can specify subnets from one or more Availability Zones.
ip_address_type: Option<IpAddressType>The IP address type.
\[Application Load Balancers\] The possible values are ipv4 (IPv4 addresses), dualstack (IPv4 and IPv6 addresses), and dualstack-without-public-ipv4 (public IPv6 addresses and private IPv4 and IPv6 addresses).
\[Network Load Balancers and Gateway Load Balancers\] The possible values are ipv4 (IPv4 addresses) and dualstack (IPv4 and IPv6 addresses).
enable_prefix_for_ipv6_source_nat: Option<EnablePrefixForIpv6SourceNatEnum>\[Network Load Balancers with UDP listeners\] Indicates whether to use an IPv6 prefix from each subnet for source NAT. The IP address type must be dualstack. The default value is off.
Implementations§
Source§impl SetSubnetsInput
impl SetSubnetsInput
Sourcepub fn load_balancer_arn(&self) -> Option<&str>
pub fn load_balancer_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the load balancer.
Sourcepub fn subnets(&self) -> &[String]
pub fn subnets(&self) -> &[String]
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
\[Application Load Balancers\] You must specify subnets from at least two Availability Zones.
\[Application Load Balancers on Outposts\] You must specify one Outpost subnet.
\[Application Load Balancers on Local Zones\] You can specify subnets from one or more Local Zones.
\[Network Load Balancers and Gateway Load Balancers\] You can specify subnets from one or more Availability Zones.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .subnets.is_none().
Sourcepub fn subnet_mappings(&self) -> &[SubnetMapping]
pub fn subnet_mappings(&self) -> &[SubnetMapping]
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
\[Application Load Balancers\] You must specify subnets from at least two Availability Zones. You can't specify Elastic IP addresses for your subnets.
\[Application Load Balancers on Outposts\] You must specify one Outpost subnet.
\[Application Load Balancers on Local Zones\] You can specify subnets from one or more Local Zones.
\[Network Load Balancers\] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.
\[Gateway Load Balancers\] You can specify subnets from one or more Availability Zones.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .subnet_mappings.is_none().
Sourcepub fn ip_address_type(&self) -> Option<&IpAddressType>
pub fn ip_address_type(&self) -> Option<&IpAddressType>
The IP address type.
\[Application Load Balancers\] The possible values are ipv4 (IPv4 addresses), dualstack (IPv4 and IPv6 addresses), and dualstack-without-public-ipv4 (public IPv6 addresses and private IPv4 and IPv6 addresses).
\[Network Load Balancers and Gateway Load Balancers\] The possible values are ipv4 (IPv4 addresses) and dualstack (IPv4 and IPv6 addresses).
Sourcepub fn enable_prefix_for_ipv6_source_nat(
&self,
) -> Option<&EnablePrefixForIpv6SourceNatEnum>
pub fn enable_prefix_for_ipv6_source_nat( &self, ) -> Option<&EnablePrefixForIpv6SourceNatEnum>
\[Network Load Balancers with UDP listeners\] Indicates whether to use an IPv6 prefix from each subnet for source NAT. The IP address type must be dualstack. The default value is off.
Source§impl SetSubnetsInput
impl SetSubnetsInput
Sourcepub fn builder() -> SetSubnetsInputBuilder
pub fn builder() -> SetSubnetsInputBuilder
Creates a new builder-style object to manufacture SetSubnetsInput.
Trait Implementations§
Source§impl Clone for SetSubnetsInput
impl Clone for SetSubnetsInput
Source§fn clone(&self) -> SetSubnetsInput
fn clone(&self) -> SetSubnetsInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for SetSubnetsInput
impl Debug for SetSubnetsInput
Source§impl PartialEq for SetSubnetsInput
impl PartialEq for SetSubnetsInput
impl StructuralPartialEq for SetSubnetsInput
Auto Trait Implementations§
impl Freeze for SetSubnetsInput
impl RefUnwindSafe for SetSubnetsInput
impl Send for SetSubnetsInput
impl Sync for SetSubnetsInput
impl Unpin for SetSubnetsInput
impl UnwindSafe for SetSubnetsInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);