Struct aws_sdk_elasticloadbalancingv2::operation::set_subnets::builders::SetSubnetsFluentBuilder

pub struct SetSubnetsFluentBuilder { /* private fields */ }

Fluent builder constructing a request to SetSubnets.

Enables the Availability Zones for the specified public subnets for the specified Application Load Balancer, Network Load Balancer or Gateway Load Balancer. The specified subnets replace the previously enabled subnets.

When you specify subnets for a Network Load Balancer, or Gateway Load Balancer you must include all subnets that were enabled previously, with their existing configurations, plus any additional subnets.

Implementations

impl SetSubnetsFluentBuilder

pub fn as_input(&self) -> &SetSubnetsInputBuilder

Access the SetSubnets as a reference.

pub async fn send( self ) -> Result<SetSubnetsOutput, SdkError<SetSubnetsError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self ) -> CustomizableOperation<SetSubnetsOutput, SetSubnetsError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn load_balancer_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the load balancer.

pub fn set_load_balancer_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the load balancer.

pub fn get_load_balancer_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the load balancer.

pub fn subnets(self, input: impl Into<String>) -> Self

Appends an item to Subnets.

To override the contents of this collection use set_subnets.

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.

[Application Load Balancers] You must specify subnets from at least two Availability Zones.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

pub fn set_subnets(self, input: Option<Vec<String>>) -> Self

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.

[Application Load Balancers] You must specify subnets from at least two Availability Zones.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

pub fn get_subnets(&self) -> &Option<Vec<String>>

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.

[Application Load Balancers] You must specify subnets from at least two Availability Zones.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

pub fn subnet_mappings(self, input: SubnetMapping) -> Self

Appends an item to SubnetMappings.

To override the contents of this collection use set_subnet_mappings.

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.

[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

pub fn set_subnet_mappings(self, input: Option<Vec<SubnetMapping>>) -> Self

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.

[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

pub fn get_subnet_mappings(&self) -> &Option<Vec<SubnetMapping>>

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.

[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

pub fn ip_address_type(self, input: IpAddressType) -> Self

[Network Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses). You can’t specify dualstack for a load balancer with a UDP or TCP_UDP listener.

[Gateway Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).

pub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self

[Network Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses). You can’t specify dualstack for a load balancer with a UDP or TCP_UDP listener.

[Gateway Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).

pub fn get_ip_address_type(&self) -> &Option<IpAddressType>

[Network Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses). You can’t specify dualstack for a load balancer with a UDP or TCP_UDP listener.

[Gateway Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).

Trait Implementations

impl Clone for SetSubnetsFluentBuilder

fn clone(&self) -> SetSubnetsFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SetSubnetsFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.