Struct aws_sdk_elasticloadbalancingv2::operation::create_load_balancer::CreateLoadBalancerInput

#[non_exhaustive]
pub struct CreateLoadBalancerInput {
    pub name: Option<String>,
    pub subnets: Option<Vec<String>>,
    pub subnet_mappings: Option<Vec<SubnetMapping>>,
    pub security_groups: Option<Vec<String>>,
    pub scheme: Option<LoadBalancerSchemeEnum>,
    pub tags: Option<Vec<Tag>>,
    pub type: Option<LoadBalancerTypeEnum>,
    pub ip_address_type: Option<IpAddressType>,
    pub customer_owned_ipv4_pool: Option<String>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

name: Option<String>

The name of the load balancer.

This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with "internal-".

subnets: Option<Vec<String>>

The IDs of the subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both. To specify an Elastic IP address, specify subnet mappings instead of subnets.

[Application Load Balancers] You must specify subnets from at least two Availability Zones.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

subnet_mappings: Option<Vec<SubnetMapping>>

The IDs of the subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both.

[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You cannot specify Elastic IP addresses for your subnets.

security_groups: Option<Vec<String>>

[Application Load Balancers and Network Load Balancers] The IDs of the security groups for the load balancer.

scheme: Option<LoadBalancerSchemeEnum>

The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.

The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.

The default is an Internet-facing load balancer.

You cannot specify a scheme for a Gateway Load Balancer.

tags: Option<Vec<Tag>>

The tags to assign to the load balancer.

type: Option<LoadBalancerTypeEnum>

The type of load balancer. The default is application.

ip_address_type: Option<IpAddressType>

The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).

customer_owned_ipv4_pool: Option<String>

[Application Load Balancers on Outposts] The ID of the customer-owned address pool (CoIP pool).

Implementations

impl CreateLoadBalancerInput

pub fn name(&self) -> Option<&str>

The name of the load balancer.

This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with "internal-".

pub fn subnets(&self) -> &[String]

The IDs of the subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both. To specify an Elastic IP address, specify subnet mappings instead of subnets.

[Application Load Balancers] You must specify subnets from at least two Availability Zones.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .subnets.is_none().

pub fn subnet_mappings(&self) -> &[SubnetMapping]

The IDs of the subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both.

[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You cannot specify Elastic IP addresses for your subnets.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .subnet_mappings.is_none().

pub fn security_groups(&self) -> &[String]

[Application Load Balancers and Network Load Balancers] The IDs of the security groups for the load balancer.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .security_groups.is_none().

pub fn scheme(&self) -> Option<&LoadBalancerSchemeEnum>

The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.

The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.

The default is an Internet-facing load balancer.

You cannot specify a scheme for a Gateway Load Balancer.

pub fn tags(&self) -> &[Tag]

The tags to assign to the load balancer.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().

pub fn type(&self) -> Option<&LoadBalancerTypeEnum>

The type of load balancer. The default is application.

pub fn ip_address_type(&self) -> Option<&IpAddressType>

The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).

pub fn customer_owned_ipv4_pool(&self) -> Option<&str>

[Application Load Balancers on Outposts] The ID of the customer-owned address pool (CoIP pool).

impl CreateLoadBalancerInput

pub fn builder() -> CreateLoadBalancerInputBuilder

Creates a new builder-style object to manufacture CreateLoadBalancerInput.

Trait Implementations

impl Clone for CreateLoadBalancerInput

fn clone(&self) -> CreateLoadBalancerInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateLoadBalancerInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for CreateLoadBalancerInput

fn eq(&self, other: &CreateLoadBalancerInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CreateLoadBalancerInput