Struct aws_sdk_elasticloadbalancingv2::operation::create_load_balancer::builders::CreateLoadBalancerFluentBuilder

pub struct CreateLoadBalancerFluentBuilder { /* private fields */ }

Fluent builder constructing a request to CreateLoadBalancer.

Creates an Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.

For more information, see the following:

• Application Load Balancers

• Network Load Balancers

• Gateway Load Balancers

This operation is idempotent, which means that it completes at most one time. If you attempt to create multiple load balancers with the same settings, each call succeeds.

Implementations

impl CreateLoadBalancerFluentBuilder

pub fn as_input(&self) -> &CreateLoadBalancerInputBuilder

Access the CreateLoadBalancer as a reference.

pub async fn send( self ) -> Result<CreateLoadBalancerOutput, SdkError<CreateLoadBalancerError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self ) -> CustomizableOperation<CreateLoadBalancerOutput, CreateLoadBalancerError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn name(self, input: impl Into<String>) -> Self

The name of the load balancer.

This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with "internal-".

pub fn set_name(self, input: Option<String>) -> Self

The name of the load balancer.

This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with "internal-".

pub fn get_name(&self) -> &Option<String>

The name of the load balancer.

This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with "internal-".

pub fn subnets(self, input: impl Into<String>) -> Self

Appends an item to Subnets.

To override the contents of this collection use set_subnets.

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both. To specify an Elastic IP address, specify subnet mappings instead of subnets.

[Application Load Balancers] You must specify subnets from at least two Availability Zones.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

pub fn set_subnets(self, input: Option<Vec<String>>) -> Self

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both. To specify an Elastic IP address, specify subnet mappings instead of subnets.

[Application Load Balancers] You must specify subnets from at least two Availability Zones.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

pub fn get_subnets(&self) -> &Option<Vec<String>>

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both. To specify an Elastic IP address, specify subnet mappings instead of subnets.

[Application Load Balancers] You must specify subnets from at least two Availability Zones.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.

pub fn subnet_mappings(self, input: SubnetMapping) -> Self

Appends an item to SubnetMappings.

To override the contents of this collection use set_subnet_mappings.

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both.

[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You cannot specify Elastic IP addresses for your subnets.

pub fn set_subnet_mappings(self, input: Option<Vec<SubnetMapping>>) -> Self

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both.

[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You cannot specify Elastic IP addresses for your subnets.

pub fn get_subnet_mappings(&self) -> &Option<Vec<SubnetMapping>>

The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both.

[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.

[Application Load Balancers on Outposts] You must specify one Outpost subnet.

[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.

[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.

[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You cannot specify Elastic IP addresses for your subnets.

pub fn security_groups(self, input: impl Into<String>) -> Self

Appends an item to SecurityGroups.

To override the contents of this collection use set_security_groups.

[Application Load Balancers and Network Load Balancers] The IDs of the security groups for the load balancer.

pub fn set_security_groups(self, input: Option<Vec<String>>) -> Self

[Application Load Balancers and Network Load Balancers] The IDs of the security groups for the load balancer.

pub fn get_security_groups(&self) -> &Option<Vec<String>>

[Application Load Balancers and Network Load Balancers] The IDs of the security groups for the load balancer.

pub fn scheme(self, input: LoadBalancerSchemeEnum) -> Self

The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.

The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.

The default is an Internet-facing load balancer.

You cannot specify a scheme for a Gateway Load Balancer.

pub fn set_scheme(self, input: Option<LoadBalancerSchemeEnum>) -> Self

The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.

The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.

The default is an Internet-facing load balancer.

You cannot specify a scheme for a Gateway Load Balancer.

pub fn get_scheme(&self) -> &Option<LoadBalancerSchemeEnum>

The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.

The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.

The default is an Internet-facing load balancer.

You cannot specify a scheme for a Gateway Load Balancer.

pub fn tags(self, input: Tag) -> Self

Appends an item to Tags.

To override the contents of this collection use set_tags.

The tags to assign to the load balancer.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

The tags to assign to the load balancer.

pub fn get_tags(&self) -> &Option<Vec<Tag>>

The tags to assign to the load balancer.

pub fn type(self, input: LoadBalancerTypeEnum) -> Self

The type of load balancer. The default is application.

pub fn set_type(self, input: Option<LoadBalancerTypeEnum>) -> Self

The type of load balancer. The default is application.

pub fn get_type(&self) -> &Option<LoadBalancerTypeEnum>

The type of load balancer. The default is application.

pub fn ip_address_type(self, input: IpAddressType) -> Self

The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).

pub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self

The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).

pub fn get_ip_address_type(&self) -> &Option<IpAddressType>

The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).

pub fn customer_owned_ipv4_pool(self, input: impl Into<String>) -> Self

[Application Load Balancers on Outposts] The ID of the customer-owned address pool (CoIP pool).

pub fn set_customer_owned_ipv4_pool(self, input: Option<String>) -> Self

[Application Load Balancers on Outposts] The ID of the customer-owned address pool (CoIP pool).

pub fn get_customer_owned_ipv4_pool(&self) -> &Option<String>

[Application Load Balancers on Outposts] The ID of the customer-owned address pool (CoIP pool).

Trait Implementations

impl Clone for CreateLoadBalancerFluentBuilder

fn clone(&self) -> CreateLoadBalancerFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateLoadBalancerFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.