Struct aws_sdk_elasticloadbalancingv2::client::fluent_builders::CreateLoadBalancer [−][src]
pub struct CreateLoadBalancer<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }
Expand description
Fluent builder constructing a request to CreateLoadBalancer
.
Creates an Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.
For more information, see the following:
This operation is idempotent, which means that it completes at most one time. If you attempt to create multiple load balancers with the same settings, each call succeeds.
Implementations
impl<C, M, R> CreateLoadBalancer<C, M, R> where
C: SmithyConnector,
M: SmithyMiddleware<C>,
R: NewRequestPolicy,
impl<C, M, R> CreateLoadBalancer<C, M, R> where
C: SmithyConnector,
M: SmithyMiddleware<C>,
R: NewRequestPolicy,
pub async fn send(
self
) -> Result<CreateLoadBalancerOutput, SdkError<CreateLoadBalancerError>> where
R::Policy: SmithyRetryPolicy<CreateLoadBalancerInputOperationOutputAlias, CreateLoadBalancerOutput, CreateLoadBalancerError, CreateLoadBalancerInputOperationRetryAlias>,
pub async fn send(
self
) -> Result<CreateLoadBalancerOutput, SdkError<CreateLoadBalancerError>> where
R::Policy: SmithyRetryPolicy<CreateLoadBalancerInputOperationOutputAlias, CreateLoadBalancerOutput, CreateLoadBalancerError, CreateLoadBalancerInputOperationRetryAlias>,
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
The name of the load balancer.
This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with "internal-".
The name of the load balancer.
This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with "internal-".
Appends an item to Subnets
.
To override the contents of this collection use set_subnets
.
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones.
[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones.
[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.
Appends an item to SubnetMappings
.
To override the contents of this collection use set_subnet_mappings
.
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.
[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You cannot specify Elastic IP addresses for your subnets.
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.
[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You cannot specify Elastic IP addresses for your subnets.
Appends an item to SecurityGroups
.
To override the contents of this collection use set_security_groups
.
[Application Load Balancers] The IDs of the security groups for the load balancer.
[Application Load Balancers] The IDs of the security groups for the load balancer.
The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.
The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.
The default is an Internet-facing load balancer.
You cannot specify a scheme for a Gateway Load Balancer.
The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.
The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.
The default is an Internet-facing load balancer.
You cannot specify a scheme for a Gateway Load Balancer.
Appends an item to Tags
.
To override the contents of this collection use set_tags
.
The tags to assign to the load balancer.
The tags to assign to the load balancer.
The type of load balancer. The default is application
.
The type of load balancer. The default is application
.
The type of IP addresses used by the subnets for your load balancer. The possible values
are ipv4
(for IPv4 addresses) and dualstack
(for IPv4 and IPv6
addresses). Internal load balancers must use ipv4
.
The type of IP addresses used by the subnets for your load balancer. The possible values
are ipv4
(for IPv4 addresses) and dualstack
(for IPv4 and IPv6
addresses). Internal load balancers must use ipv4
.
[Application Load Balancers on Outposts] The ID of the customer-owned address pool (CoIP pool).
[Application Load Balancers on Outposts] The ID of the customer-owned address pool (CoIP pool).
Trait Implementations
Auto Trait Implementations
impl<C = DynConnector, M = AwsMiddleware, R = Standard> !RefUnwindSafe for CreateLoadBalancer<C, M, R>
impl<C, M, R> Send for CreateLoadBalancer<C, M, R> where
C: Send + Sync,
M: Send + Sync,
R: Send + Sync,
impl<C, M, R> Sync for CreateLoadBalancer<C, M, R> where
C: Send + Sync,
M: Send + Sync,
R: Send + Sync,
impl<C, M, R> Unpin for CreateLoadBalancer<C, M, R>
impl<C = DynConnector, M = AwsMiddleware, R = Standard> !UnwindSafe for CreateLoadBalancer<C, M, R>
Blanket Implementations
Mutably borrows from an owned value. Read more
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more