pub struct SetSubnets { /* private fields */ }
Expand description
Fluent builder constructing a request to SetSubnets
.
Enables the Availability Zones for the specified public subnets for the specified Application Load Balancer or Network Load Balancer. The specified subnets replace the previously enabled subnets.
When you specify subnets for a Network Load Balancer, you must include all subnets that were enabled previously, with their existing configurations, plus any additional subnets.
Implementations
sourceimpl SetSubnets
impl SetSubnets
sourcepub async fn send(self) -> Result<SetSubnetsOutput, SdkError<SetSubnetsError>>
pub async fn send(self) -> Result<SetSubnetsOutput, SdkError<SetSubnetsError>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn load_balancer_arn(self, input: impl Into<String>) -> Self
pub fn load_balancer_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of the load balancer.
sourcepub fn set_load_balancer_arn(self, input: Option<String>) -> Self
pub fn set_load_balancer_arn(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of the load balancer.
sourcepub fn subnets(self, input: impl Into<String>) -> Self
pub fn subnets(self, input: impl Into<String>) -> Self
Appends an item to Subnets
.
To override the contents of this collection use set_subnets
.
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones.
sourcepub fn set_subnets(self, input: Option<Vec<String>>) -> Self
pub fn set_subnets(self, input: Option<Vec<String>>) -> Self
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones.
sourcepub fn subnet_mappings(self, input: SubnetMapping) -> Self
pub fn subnet_mappings(self, input: SubnetMapping) -> Self
Appends an item to SubnetMappings
.
To override the contents of this collection use set_subnet_mappings
.
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.
sourcepub fn set_subnet_mappings(self, input: Option<Vec<SubnetMapping>>) -> Self
pub fn set_subnet_mappings(self, input: Option<Vec<SubnetMapping>>) -> Self
The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.
[Application Load Balancers] You must specify subnets from at least two Availability Zones. You cannot specify Elastic IP addresses for your subnets.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.
sourcepub fn ip_address_type(self, input: IpAddressType) -> Self
pub fn ip_address_type(self, input: IpAddressType) -> Self
[Network Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4
(for IPv4 addresses) and dualstack
(for IPv4 and IPv6 addresses). You can’t specify dualstack
for a load balancer with a UDP or TCP_UDP listener. .
sourcepub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self
pub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self
[Network Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4
(for IPv4 addresses) and dualstack
(for IPv4 and IPv6 addresses). You can’t specify dualstack
for a load balancer with a UDP or TCP_UDP listener. .
Trait Implementations
sourceimpl Clone for SetSubnets
impl Clone for SetSubnets
sourcefn clone(&self) -> SetSubnets
fn clone(&self) -> SetSubnets
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl !RefUnwindSafe for SetSubnets
impl Send for SetSubnets
impl Sync for SetSubnets
impl Unpin for SetSubnets
impl !UnwindSafe for SetSubnets
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more