Struct aws_sdk_elasticache::client::fluent_builders::DescribeReservedCacheNodesOfferings

pub struct DescribeReservedCacheNodesOfferings<C = DynConnector, M = DefaultMiddleware, R = Standard> { /* fields omitted */ }

Fluent builder constructing a request to DescribeReservedCacheNodesOfferings.

Lists available reserved cache node offerings.

Implementations

impl<C, M, R> DescribeReservedCacheNodesOfferings<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(
    self
) -> Result<DescribeReservedCacheNodesOfferingsOutput, SdkError<DescribeReservedCacheNodesOfferingsError>> where
    R::Policy: SmithyRetryPolicy<DescribeReservedCacheNodesOfferingsInputOperationOutputAlias, DescribeReservedCacheNodesOfferingsOutput, DescribeReservedCacheNodesOfferingsError, DescribeReservedCacheNodesOfferingsInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn into_paginator(
    self
) -> DescribeReservedCacheNodesOfferingsPaginator<C, M, R>

Create a paginator for this request

Paginators are used by calling send().await which returns a Stream.

pub fn reserved_cache_nodes_offering_id(self, input: impl Into<String>) -> Self

The offering identifier filter value. Use this parameter to show only the available offering that matches the specified reservation identifier.

Example: 438012d3-4052-4cc7-b2e3-8d3372e0e706

pub fn set_reserved_cache_nodes_offering_id(self, input: Option<String>) -> Self

The offering identifier filter value. Use this parameter to show only the available offering that matches the specified reservation identifier.

Example: 438012d3-4052-4cc7-b2e3-8d3372e0e706

pub fn cache_node_type(self, input: impl Into<String>) -> Self

The cache node type filter value. Use this parameter to show only the available offerings matching the specified cache node type.

The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.

• General purpose:

  • Current generation:

    M6g node types: (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward) cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge

    For region availability, see Supported Node Types

    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge

    M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge

    T4g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium

    T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium

    T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium

  • Previous generation: (not recommended)

    T1 node types: cache.t1.micro

    M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge

    M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge

• Compute optimized:

  • Previous generation: (not recommended)

    C1 node types: cache.c1.xlarge

• Memory optimized with data tiering:

  • Current generation:

    R6gd node types (available only for Redis engine version 6.2 onward).

    cache.r6gd.xlarge, cache.r6gd.2xlarge, cache.r6gd.4xlarge, cache.r6gd.8xlarge, cache.r6gd.12xlarge, cache.r6gd.16xlarge

• Memory optimized:

  • Current generation:

    R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).

    cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge

    For region availability, see Supported Node Types

    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge

    R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge

  • Previous generation: (not recommended)

    M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge

    R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge

Additional node type info

• All current generation instance types are created in Amazon VPC by default.

• Redis append-only files (AOF) are not supported for T1 or T2 instances.

• Redis Multi-AZ with automatic failover is not supported on T1 instances.

• Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.

pub fn set_cache_node_type(self, input: Option<String>) -> Self

The cache node type filter value. Use this parameter to show only the available offerings matching the specified cache node type.

The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.

• General purpose:

  • Current generation:

    M6g node types: (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward) cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge

    For region availability, see Supported Node Types

    M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge

    M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge

    T4g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium

    T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium

    T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium

  • Previous generation: (not recommended)

    T1 node types: cache.t1.micro

    M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge

    M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge

• Compute optimized:

  • Previous generation: (not recommended)

    C1 node types: cache.c1.xlarge

• Memory optimized with data tiering:

  • Current generation:

    R6gd node types (available only for Redis engine version 6.2 onward).

    cache.r6gd.xlarge, cache.r6gd.2xlarge, cache.r6gd.4xlarge, cache.r6gd.8xlarge, cache.r6gd.12xlarge, cache.r6gd.16xlarge

• Memory optimized:

  • Current generation:

    R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).

    cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge

    For region availability, see Supported Node Types

    R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge

    R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge

  • Previous generation: (not recommended)

    M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge

    R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge

Additional node type info

• All current generation instance types are created in Amazon VPC by default.

• Redis append-only files (AOF) are not supported for T1 or T2 instances.

• Redis Multi-AZ with automatic failover is not supported on T1 instances.

• Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.

pub fn duration(self, input: impl Into<String>) -> Self

Duration filter value, specified in years or seconds. Use this parameter to show only reservations for a given duration.

Valid Values: 1 | 3 | 31536000 | 94608000

pub fn set_duration(self, input: Option<String>) -> Self

Duration filter value, specified in years or seconds. Use this parameter to show only reservations for a given duration.

Valid Values: 1 | 3 | 31536000 | 94608000

pub fn product_description(self, input: impl Into<String>) -> Self

The product description filter value. Use this parameter to show only the available offerings matching the specified product description.

pub fn set_product_description(self, input: Option<String>) -> Self

The product description filter value. Use this parameter to show only the available offerings matching the specified product description.

pub fn offering_type(self, input: impl Into<String>) -> Self

The offering type filter value. Use this parameter to show only the available offerings matching the specified offering type.

Valid Values: "Light Utilization"|"Medium Utilization"|"Heavy Utilization" |"All Upfront"|"Partial Upfront"| "No Upfront"

pub fn set_offering_type(self, input: Option<String>) -> Self

The offering type filter value. Use this parameter to show only the available offerings matching the specified offering type.

Valid Values: "Light Utilization"|"Medium Utilization"|"Heavy Utilization" |"All Upfront"|"Partial Upfront"| "No Upfront"

pub fn max_records(self, input: i32) -> Self

The maximum number of records to include in the response. If more records exist than the specified MaxRecords value, a marker is included in the response so that the remaining results can be retrieved.

Default: 100

Constraints: minimum 20; maximum 100.

pub fn set_max_records(self, input: Option<i32>) -> Self

The maximum number of records to include in the response. If more records exist than the specified MaxRecords value, a marker is included in the response so that the remaining results can be retrieved.

Default: 100

Constraints: minimum 20; maximum 100.

pub fn marker(self, input: impl Into<String>) -> Self

An optional marker returned from a prior request. Use this marker for pagination of results from this operation. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by MaxRecords.

pub fn set_marker(self, input: Option<String>) -> Self

An optional marker returned from a prior request. Use this marker for pagination of results from this operation. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by MaxRecords.

Trait Implementations

impl<C: Clone, M: Clone, R: Clone> Clone for DescribeReservedCacheNodesOfferings<C, M, R>

fn clone(&self) -> DescribeReservedCacheNodesOfferings<C, M, R>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for DescribeReservedCacheNodesOfferings<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.