Struct aws_sdk_elasticache::client::fluent_builders::DescribeReservedCacheNodes

source ·

pub struct DescribeReservedCacheNodes { /* private fields */ }

Expand description

Fluent builder constructing a request to DescribeReservedCacheNodes.

Returns information about reserved cache nodes for this account, or about a specified reserved cache node.

Implementations§

source §

impl DescribeReservedCacheNodes

source

pub async fn customize(
self
) -> Result<CustomizableOperation<DescribeReservedCacheNodes, AwsResponseRetryClassifier>, SdkError<DescribeReservedCacheNodesError>>

Consume this builder, creating a customizable operation that can be modified before being sent. The operation’s inner http::Request can be modified as well.

source

pub async fn send(
self
) -> Result<DescribeReservedCacheNodesOutput, SdkError<DescribeReservedCacheNodesError>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

source

pub fn into_paginator(self) -> DescribeReservedCacheNodesPaginator

Create a paginator for this request

Paginators are used by calling send().await which returns a Stream.

source

pub fn reserved_cache_node_id(self, input: impl Into<String>) -> Self

The reserved cache node identifier filter value. Use this parameter to show only the reservation that matches the specified reservation ID.

source

pub fn set_reserved_cache_node_id(self, input: Option<String>) -> Self

The reserved cache node identifier filter value. Use this parameter to show only the reservation that matches the specified reservation ID.

source

pub fn reserved_cache_nodes_offering_id(self, input: impl Into<String>) -> Self

The offering identifier filter value. Use this parameter to show only purchased reservations matching the specified offering identifier.

source

pub fn set_reserved_cache_nodes_offering_id(self, input: Option<String>) -> Self

The offering identifier filter value. Use this parameter to show only purchased reservations matching the specified offering identifier.

source

pub fn cache_node_type(self, input: impl Into<String>) -> Self

The cache node type filter value. Use this parameter to show only those reservations matching the specified cache node type.

The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.

General purpose:
- Current generation:
  
  M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge
  
  For region availability, see Supported Node Types
  
  M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge
  
  M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge
  
  T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium
  
  T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium
  
  T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium
- Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)
  
  T1 node types: cache.t1.micro
  
  M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge
  
  M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge
Compute optimized:
- Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)
  
  C1 node types: cache.c1.xlarge
Memory optimized:
- Current generation:
  
  R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).
  
  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge
  
  For region availability, see Supported Node Types
  
  R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge
  
  R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge
- Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)
  
  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge
  
  R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge

Additional node type info

All current generation instance types are created in Amazon VPC by default.
Redis append-only files (AOF) are not supported for T1 or T2 instances.
Redis Multi-AZ with automatic failover is not supported on T1 instances.
Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.

source

pub fn set_cache_node_type(self, input: Option<String>) -> Self

The cache node type filter value. Use this parameter to show only those reservations matching the specified cache node type.

The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.

General purpose:
- Current generation:
  
  M6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward): cache.m6g.large, cache.m6g.xlarge, cache.m6g.2xlarge, cache.m6g.4xlarge, cache.m6g.8xlarge, cache.m6g.12xlarge, cache.m6g.16xlarge
  
  For region availability, see Supported Node Types
  
  M5 node types: cache.m5.large, cache.m5.xlarge, cache.m5.2xlarge, cache.m5.4xlarge, cache.m5.12xlarge, cache.m5.24xlarge
  
  M4 node types: cache.m4.large, cache.m4.xlarge, cache.m4.2xlarge, cache.m4.4xlarge, cache.m4.10xlarge
  
  T4g node types (available only for Redis engine version 5.0.6 onward and Memcached engine version 1.5.16 onward): cache.t4g.micro, cache.t4g.small, cache.t4g.medium
  
  T3 node types: cache.t3.micro, cache.t3.small, cache.t3.medium
  
  T2 node types: cache.t2.micro, cache.t2.small, cache.t2.medium
- Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)
  
  T1 node types: cache.t1.micro
  
  M1 node types: cache.m1.small, cache.m1.medium, cache.m1.large, cache.m1.xlarge
  
  M3 node types: cache.m3.medium, cache.m3.large, cache.m3.xlarge, cache.m3.2xlarge
Compute optimized:
- Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)
  
  C1 node types: cache.c1.xlarge
Memory optimized:
- Current generation:
  
  R6g node types (available only for Redis engine version 5.0.6 onward and for Memcached engine version 1.5.16 onward).
  
  cache.r6g.large, cache.r6g.xlarge, cache.r6g.2xlarge, cache.r6g.4xlarge, cache.r6g.8xlarge, cache.r6g.12xlarge, cache.r6g.16xlarge
  
  For region availability, see Supported Node Types
  
  R5 node types: cache.r5.large, cache.r5.xlarge, cache.r5.2xlarge, cache.r5.4xlarge, cache.r5.12xlarge, cache.r5.24xlarge
  
  R4 node types: cache.r4.large, cache.r4.xlarge, cache.r4.2xlarge, cache.r4.4xlarge, cache.r4.8xlarge, cache.r4.16xlarge
- Previous generation: (not recommended. Existing clusters are still supported but creation of new clusters is not supported for these types.)
  
  M2 node types: cache.m2.xlarge, cache.m2.2xlarge, cache.m2.4xlarge
  
  R3 node types: cache.r3.large, cache.r3.xlarge, cache.r3.2xlarge, cache.r3.4xlarge, cache.r3.8xlarge

Additional node type info

All current generation instance types are created in Amazon VPC by default.
Redis append-only files (AOF) are not supported for T1 or T2 instances.
Redis Multi-AZ with automatic failover is not supported on T1 instances.
Redis configuration variables appendonly and appendfsync are not supported on Redis version 2.8.22 and later.

source

pub fn duration(self, input: impl Into<String>) -> Self

The duration filter value, specified in years or seconds. Use this parameter to show only reservations for this duration.

Valid Values: 1 | 3 | 31536000 | 94608000

source

pub fn set_duration(self, input: Option<String>) -> Self

The duration filter value, specified in years or seconds. Use this parameter to show only reservations for this duration.

Valid Values: 1 | 3 | 31536000 | 94608000

source

pub fn product_description(self, input: impl Into<String>) -> Self

The product description filter value. Use this parameter to show only those reservations matching the specified product description.

source

pub fn set_product_description(self, input: Option<String>) -> Self

The product description filter value. Use this parameter to show only those reservations matching the specified product description.

source

pub fn offering_type(self, input: impl Into<String>) -> Self

The offering type filter value. Use this parameter to show only the available offerings matching the specified offering type.

source

pub fn set_offering_type(self, input: Option<String>) -> Self

The offering type filter value. Use this parameter to show only the available offerings matching the specified offering type.

source

pub fn max_records(self, input: i32) -> Self

The maximum number of records to include in the response. If more records exist than the specified MaxRecords value, a marker is included in the response so that the remaining results can be retrieved.

Default: 100

Constraints: minimum 20; maximum 100.

source

pub fn set_max_records(self, input: Option<i32>) -> Self

The maximum number of records to include in the response. If more records exist than the specified MaxRecords value, a marker is included in the response so that the remaining results can be retrieved.

Default: 100

Constraints: minimum 20; maximum 100.

source

pub fn marker(self, input: impl Into<String>) -> Self

An optional marker returned from a prior request. Use this marker for pagination of results from this operation. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by MaxRecords.

source

pub fn set_marker(self, input: Option<String>) -> Self

An optional marker returned from a prior request. Use this marker for pagination of results from this operation. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by MaxRecords.