pub struct CreateAccessPointFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateAccessPoint.
Creates an EFS access point. An access point is an application-specific view into an EFS file system that applies an operating system user and group, and a file system path, to any file system request made through the access point. The operating system user and group override any identity information provided by the NFS client. The file system path is exposed as the access point's root directory. Applications using the access point can only access data in the application's own directory and any subdirectories. A file system can have a maximum of 10,000 access points unless you request an increase. To learn more, see Mounting a file system using EFS access points.
If multiple requests to create access points on the same file system are sent in quick succession, and the file system is near the limit of access points, you may experience a throttling response for these requests. This is to ensure that the file system does not exceed the stated access point limit.
This operation requires permissions for the elasticfilesystem:CreateAccessPoint action.
Access points can be tagged on creation. If tags are specified in the creation action, IAM performs additional authorization on the elasticfilesystem:TagResource action to verify if users have permissions to create tags. Therefore, you must grant explicit permissions to use the elasticfilesystem:TagResource action. For more information, see Granting permissions to tag resources during creation.
Implementations§
Source§impl CreateAccessPointFluentBuilder
impl CreateAccessPointFluentBuilder
Sourcepub fn as_input(&self) -> &CreateAccessPointInputBuilder
pub fn as_input(&self) -> &CreateAccessPointInputBuilder
Access the CreateAccessPoint as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateAccessPointOutput, SdkError<CreateAccessPointError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateAccessPointOutput, SdkError<CreateAccessPointError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateAccessPointOutput, CreateAccessPointError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateAccessPointOutput, CreateAccessPointError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn client_token(self, input: impl Into<String>) -> Self
pub fn client_token(self, input: impl Into<String>) -> Self
A string of up to 64 ASCII characters that Amazon EFS uses to ensure idempotent creation.
Sourcepub fn set_client_token(self, input: Option<String>) -> Self
pub fn set_client_token(self, input: Option<String>) -> Self
A string of up to 64 ASCII characters that Amazon EFS uses to ensure idempotent creation.
Sourcepub fn get_client_token(&self) -> &Option<String>
pub fn get_client_token(&self) -> &Option<String>
A string of up to 64 ASCII characters that Amazon EFS uses to ensure idempotent creation.
Appends an item to Tags.
To override the contents of this collection use set_tags.
Creates tags associated with the access point. Each tag is a key-value pair, each key must be unique. For more information, see Tagging Amazon Web Services resources in the Amazon Web Services General Reference Guide.
Creates tags associated with the access point. Each tag is a key-value pair, each key must be unique. For more information, see Tagging Amazon Web Services resources in the Amazon Web Services General Reference Guide.
Creates tags associated with the access point. Each tag is a key-value pair, each key must be unique. For more information, see Tagging Amazon Web Services resources in the Amazon Web Services General Reference Guide.
Sourcepub fn file_system_id(self, input: impl Into<String>) -> Self
pub fn file_system_id(self, input: impl Into<String>) -> Self
The ID of the EFS file system that the access point provides access to.
Sourcepub fn set_file_system_id(self, input: Option<String>) -> Self
pub fn set_file_system_id(self, input: Option<String>) -> Self
The ID of the EFS file system that the access point provides access to.
Sourcepub fn get_file_system_id(&self) -> &Option<String>
pub fn get_file_system_id(&self) -> &Option<String>
The ID of the EFS file system that the access point provides access to.
Sourcepub fn posix_user(self, input: PosixUser) -> Self
pub fn posix_user(self, input: PosixUser) -> Self
The operating system user and group applied to all file system requests made using the access point.
Sourcepub fn set_posix_user(self, input: Option<PosixUser>) -> Self
pub fn set_posix_user(self, input: Option<PosixUser>) -> Self
The operating system user and group applied to all file system requests made using the access point.
Sourcepub fn get_posix_user(&self) -> &Option<PosixUser>
pub fn get_posix_user(&self) -> &Option<PosixUser>
The operating system user and group applied to all file system requests made using the access point.
Sourcepub fn root_directory(self, input: RootDirectory) -> Self
pub fn root_directory(self, input: RootDirectory) -> Self
Specifies the directory on the EFS file system that the access point exposes as the root directory of your file system to NFS clients using the access point. The clients using the access point can only access the root directory and below. If the RootDirectory > Path specified does not exist, Amazon EFS creates it and applies the CreationInfo settings when a client connects to an access point. When specifying a RootDirectory, you must provide the Path, and the CreationInfo.
Amazon EFS creates a root directory only if you have provided the CreationInfo: OwnUid, OwnGID, and permissions for the directory. If you do not provide this information, Amazon EFS does not create the root directory. If the root directory does not exist, attempts to mount using the access point will fail.
Sourcepub fn set_root_directory(self, input: Option<RootDirectory>) -> Self
pub fn set_root_directory(self, input: Option<RootDirectory>) -> Self
Specifies the directory on the EFS file system that the access point exposes as the root directory of your file system to NFS clients using the access point. The clients using the access point can only access the root directory and below. If the RootDirectory > Path specified does not exist, Amazon EFS creates it and applies the CreationInfo settings when a client connects to an access point. When specifying a RootDirectory, you must provide the Path, and the CreationInfo.
Amazon EFS creates a root directory only if you have provided the CreationInfo: OwnUid, OwnGID, and permissions for the directory. If you do not provide this information, Amazon EFS does not create the root directory. If the root directory does not exist, attempts to mount using the access point will fail.
Sourcepub fn get_root_directory(&self) -> &Option<RootDirectory>
pub fn get_root_directory(&self) -> &Option<RootDirectory>
Specifies the directory on the EFS file system that the access point exposes as the root directory of your file system to NFS clients using the access point. The clients using the access point can only access the root directory and below. If the RootDirectory > Path specified does not exist, Amazon EFS creates it and applies the CreationInfo settings when a client connects to an access point. When specifying a RootDirectory, you must provide the Path, and the CreationInfo.
Amazon EFS creates a root directory only if you have provided the CreationInfo: OwnUid, OwnGID, and permissions for the directory. If you do not provide this information, Amazon EFS does not create the root directory. If the root directory does not exist, attempts to mount using the access point will fail.
Trait Implementations§
Source§impl Clone for CreateAccessPointFluentBuilder
impl Clone for CreateAccessPointFluentBuilder
Source§fn clone(&self) -> CreateAccessPointFluentBuilder
fn clone(&self) -> CreateAccessPointFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateAccessPointFluentBuilder
impl !RefUnwindSafe for CreateAccessPointFluentBuilder
impl Send for CreateAccessPointFluentBuilder
impl Sync for CreateAccessPointFluentBuilder
impl Unpin for CreateAccessPointFluentBuilder
impl !UnwindSafe for CreateAccessPointFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);