aws_sdk_ecs::types::builders

Struct ServiceManagedEbsVolumeConfigurationBuilder

Source 
#[non_exhaustive]
pub struct ServiceManagedEbsVolumeConfigurationBuilder { /* private fields */ }
Expand description

A builder for ServiceManagedEbsVolumeConfiguration.

Implementations§

Source§

impl ServiceManagedEbsVolumeConfigurationBuilder

Source

pub fn encrypted(self, input: bool) -> Self

Indicates whether the volume should be encrypted. If you turn on Region-level Amazon EBS encryption by default but set this value as false, the setting is overridden and the volume is encrypted with the KMS key specified for Amazon EBS encryption by default. This parameter maps 1:1 with the Encrypted parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn set_encrypted(self, input: Option<bool>) -> Self

Indicates whether the volume should be encrypted. If you turn on Region-level Amazon EBS encryption by default but set this value as false, the setting is overridden and the volume is encrypted with the KMS key specified for Amazon EBS encryption by default. This parameter maps 1:1 with the Encrypted parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn get_encrypted(&self) -> &Option<bool>

Indicates whether the volume should be encrypted. If you turn on Region-level Amazon EBS encryption by default but set this value as false, the setting is overridden and the volume is encrypted with the KMS key specified for Amazon EBS encryption by default. This parameter maps 1:1 with the Encrypted parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn kms_key_id(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) identifier of the Amazon Web Services Key Management Service key to use for Amazon EBS encryption. When a key is specified using this parameter, it overrides Amazon EBS default encryption or any KMS key that you specified for cluster-level managed storage encryption. This parameter maps 1:1 with the KmsKeyId parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information about encrypting Amazon EBS volumes attached to tasks, see Encrypt data stored in Amazon EBS volumes attached to Amazon ECS tasks.

Amazon Web Services authenticates the Amazon Web Services Key Management Service key asynchronously. Therefore, if you specify an ID, alias, or ARN that is invalid, the action can appear to complete, but eventually fails.

Source

pub fn set_kms_key_id(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) identifier of the Amazon Web Services Key Management Service key to use for Amazon EBS encryption. When a key is specified using this parameter, it overrides Amazon EBS default encryption or any KMS key that you specified for cluster-level managed storage encryption. This parameter maps 1:1 with the KmsKeyId parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information about encrypting Amazon EBS volumes attached to tasks, see Encrypt data stored in Amazon EBS volumes attached to Amazon ECS tasks.

Amazon Web Services authenticates the Amazon Web Services Key Management Service key asynchronously. Therefore, if you specify an ID, alias, or ARN that is invalid, the action can appear to complete, but eventually fails.

Source

pub fn get_kms_key_id(&self) -> &Option<String>

The Amazon Resource Name (ARN) identifier of the Amazon Web Services Key Management Service key to use for Amazon EBS encryption. When a key is specified using this parameter, it overrides Amazon EBS default encryption or any KMS key that you specified for cluster-level managed storage encryption. This parameter maps 1:1 with the KmsKeyId parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information about encrypting Amazon EBS volumes attached to tasks, see Encrypt data stored in Amazon EBS volumes attached to Amazon ECS tasks.

Amazon Web Services authenticates the Amazon Web Services Key Management Service key asynchronously. Therefore, if you specify an ID, alias, or ARN that is invalid, the action can appear to complete, but eventually fails.

Source

pub fn volume_type(self, input: impl Into<String>) -> Self

The volume type. This parameter maps 1:1 with the VolumeType parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide.

The following are the supported volume types.

  • General Purpose SSD: gp2|gp3

  • Provisioned IOPS SSD: io1|io2

  • Throughput Optimized HDD: st1

  • Cold HDD: sc1

  • Magnetic: standard

    The magnetic volume type is not supported on Fargate.

Source

pub fn set_volume_type(self, input: Option<String>) -> Self

The volume type. This parameter maps 1:1 with the VolumeType parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide.

The following are the supported volume types.

  • General Purpose SSD: gp2|gp3

  • Provisioned IOPS SSD: io1|io2

  • Throughput Optimized HDD: st1

  • Cold HDD: sc1

  • Magnetic: standard

    The magnetic volume type is not supported on Fargate.

Source

pub fn get_volume_type(&self) -> &Option<String>

The volume type. This parameter maps 1:1 with the VolumeType parameter of the CreateVolume API in the Amazon EC2 API Reference. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide.

The following are the supported volume types.

  • General Purpose SSD: gp2|gp3

  • Provisioned IOPS SSD: io1|io2

  • Throughput Optimized HDD: st1

  • Cold HDD: sc1

  • Magnetic: standard

    The magnetic volume type is not supported on Fargate.

Source

pub fn size_in_gib(self, input: i32) -> Self

The size of the volume in GiB. You must specify either a volume size or a snapshot ID. If you specify a snapshot ID, the snapshot size is used for the volume size by default. You can optionally specify a volume size greater than or equal to the snapshot size. This parameter maps 1:1 with the Size parameter of the CreateVolume API in the Amazon EC2 API Reference.

The following are the supported volume size values for each volume type.

  • gp2 and gp3: 1-16,384

  • io1 and io2: 4-16,384

  • st1 and sc1: 125-16,384

  • standard: 1-1,024

Source

pub fn set_size_in_gib(self, input: Option<i32>) -> Self

The size of the volume in GiB. You must specify either a volume size or a snapshot ID. If you specify a snapshot ID, the snapshot size is used for the volume size by default. You can optionally specify a volume size greater than or equal to the snapshot size. This parameter maps 1:1 with the Size parameter of the CreateVolume API in the Amazon EC2 API Reference.

The following are the supported volume size values for each volume type.

  • gp2 and gp3: 1-16,384

  • io1 and io2: 4-16,384

  • st1 and sc1: 125-16,384

  • standard: 1-1,024

Source

pub fn get_size_in_gib(&self) -> &Option<i32>

The size of the volume in GiB. You must specify either a volume size or a snapshot ID. If you specify a snapshot ID, the snapshot size is used for the volume size by default. You can optionally specify a volume size greater than or equal to the snapshot size. This parameter maps 1:1 with the Size parameter of the CreateVolume API in the Amazon EC2 API Reference.

The following are the supported volume size values for each volume type.

  • gp2 and gp3: 1-16,384

  • io1 and io2: 4-16,384

  • st1 and sc1: 125-16,384

  • standard: 1-1,024

Source

pub fn snapshot_id(self, input: impl Into<String>) -> Self

The snapshot that Amazon ECS uses to create volumes for attachment to tasks maintained by the service. You must specify either snapshotId or sizeInGiB in your volume configuration. This parameter maps 1:1 with the SnapshotId parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn set_snapshot_id(self, input: Option<String>) -> Self

The snapshot that Amazon ECS uses to create volumes for attachment to tasks maintained by the service. You must specify either snapshotId or sizeInGiB in your volume configuration. This parameter maps 1:1 with the SnapshotId parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn get_snapshot_id(&self) -> &Option<String>

The snapshot that Amazon ECS uses to create volumes for attachment to tasks maintained by the service. You must specify either snapshotId or sizeInGiB in your volume configuration. This parameter maps 1:1 with the SnapshotId parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn volume_initialization_rate(self, input: i32) -> Self

The rate, in MiB/s, at which data is fetched from a snapshot of an existing EBS volume to create new volumes for attachment to the tasks maintained by the service. This property can be specified only if you specify a snapshotId. For more information, see Initialize Amazon EBS volumes in the Amazon EBS User Guide.

Source

pub fn set_volume_initialization_rate(self, input: Option<i32>) -> Self

The rate, in MiB/s, at which data is fetched from a snapshot of an existing EBS volume to create new volumes for attachment to the tasks maintained by the service. This property can be specified only if you specify a snapshotId. For more information, see Initialize Amazon EBS volumes in the Amazon EBS User Guide.

Source

pub fn get_volume_initialization_rate(&self) -> &Option<i32>

The rate, in MiB/s, at which data is fetched from a snapshot of an existing EBS volume to create new volumes for attachment to the tasks maintained by the service. This property can be specified only if you specify a snapshotId. For more information, see Initialize Amazon EBS volumes in the Amazon EBS User Guide.

Source

pub fn iops(self, input: i32) -> Self

The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.

The following are the supported values for each volume type.

  • gp3: 3,000 - 16,000 IOPS

  • io1: 100 - 64,000 IOPS

  • io2: 100 - 256,000 IOPS

This parameter is required for io1 and io2 volume types. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for st1, sc1, or standard volume types.

This parameter maps 1:1 with the Iops parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn set_iops(self, input: Option<i32>) -> Self

The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.

The following are the supported values for each volume type.

  • gp3: 3,000 - 16,000 IOPS

  • io1: 100 - 64,000 IOPS

  • io2: 100 - 256,000 IOPS

This parameter is required for io1 and io2 volume types. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for st1, sc1, or standard volume types.

This parameter maps 1:1 with the Iops parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn get_iops(&self) -> &Option<i32>

The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.

The following are the supported values for each volume type.

  • gp3: 3,000 - 16,000 IOPS

  • io1: 100 - 64,000 IOPS

  • io2: 100 - 256,000 IOPS

This parameter is required for io1 and io2 volume types. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for st1, sc1, or standard volume types.

This parameter maps 1:1 with the Iops parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn throughput(self, input: i32) -> Self

The throughput to provision for a volume, in MiB/s, with a maximum of 1,000 MiB/s. This parameter maps 1:1 with the Throughput parameter of the CreateVolume API in the Amazon EC2 API Reference.

This parameter is only supported for the gp3 volume type.

Source

pub fn set_throughput(self, input: Option<i32>) -> Self

The throughput to provision for a volume, in MiB/s, with a maximum of 1,000 MiB/s. This parameter maps 1:1 with the Throughput parameter of the CreateVolume API in the Amazon EC2 API Reference.

This parameter is only supported for the gp3 volume type.

Source

pub fn get_throughput(&self) -> &Option<i32>

The throughput to provision for a volume, in MiB/s, with a maximum of 1,000 MiB/s. This parameter maps 1:1 with the Throughput parameter of the CreateVolume API in the Amazon EC2 API Reference.

This parameter is only supported for the gp3 volume type.

Source

pub fn tag_specifications(self, input: EbsTagSpecification) -> Self

Appends an item to tag_specifications.

To override the contents of this collection use set_tag_specifications.

The tags to apply to the volume. Amazon ECS applies service-managed tags by default. This parameter maps 1:1 with the TagSpecifications.N parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn set_tag_specifications( self, input: Option<Vec<EbsTagSpecification>>, ) -> Self

The tags to apply to the volume. Amazon ECS applies service-managed tags by default. This parameter maps 1:1 with the TagSpecifications.N parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn get_tag_specifications(&self) -> &Option<Vec<EbsTagSpecification>>

The tags to apply to the volume. Amazon ECS applies service-managed tags by default. This parameter maps 1:1 with the TagSpecifications.N parameter of the CreateVolume API in the Amazon EC2 API Reference.

Source

pub fn role_arn(self, input: impl Into<String>) -> Self

The ARN of the IAM role to associate with this volume. This is the Amazon ECS infrastructure IAM role that is used to manage your Amazon Web Services infrastructure. We recommend using the Amazon ECS-managed AmazonECSInfrastructureRolePolicyForVolumes IAM policy with this role. For more information, see Amazon ECS infrastructure IAM role in the Amazon ECS Developer Guide.

This field is required.
Source

pub fn set_role_arn(self, input: Option<String>) -> Self

The ARN of the IAM role to associate with this volume. This is the Amazon ECS infrastructure IAM role that is used to manage your Amazon Web Services infrastructure. We recommend using the Amazon ECS-managed AmazonECSInfrastructureRolePolicyForVolumes IAM policy with this role. For more information, see Amazon ECS infrastructure IAM role in the Amazon ECS Developer Guide.

Source

pub fn get_role_arn(&self) -> &Option<String>

The ARN of the IAM role to associate with this volume. This is the Amazon ECS infrastructure IAM role that is used to manage your Amazon Web Services infrastructure. We recommend using the Amazon ECS-managed AmazonECSInfrastructureRolePolicyForVolumes IAM policy with this role. For more information, see Amazon ECS infrastructure IAM role in the Amazon ECS Developer Guide.

Source

pub fn filesystem_type(self, input: TaskFilesystemType) -> Self

The filesystem type for the volume. For volumes created from a snapshot, you must specify the same filesystem type that the volume was using when the snapshot was created. If there is a filesystem type mismatch, the tasks will fail to start.

The available Linux filesystem types are
 ext3, ext4, and xfs. If no value is specified, the xfs filesystem type is used by default.

The available Windows filesystem types are NTFS.

Source

pub fn set_filesystem_type(self, input: Option<TaskFilesystemType>) -> Self

The filesystem type for the volume. For volumes created from a snapshot, you must specify the same filesystem type that the volume was using when the snapshot was created. If there is a filesystem type mismatch, the tasks will fail to start.

The available Linux filesystem types are
 ext3, ext4, and xfs. If no value is specified, the xfs filesystem type is used by default.

The available Windows filesystem types are NTFS.

Source

pub fn get_filesystem_type(&self) -> &Option<TaskFilesystemType>

The filesystem type for the volume. For volumes created from a snapshot, you must specify the same filesystem type that the volume was using when the snapshot was created. If there is a filesystem type mismatch, the tasks will fail to start.

The available Linux filesystem types are
 ext3, ext4, and xfs. If no value is specified, the xfs filesystem type is used by default.

The available Windows filesystem types are NTFS.

Source

pub fn build(self) -> Result<ServiceManagedEbsVolumeConfiguration, BuildError>

Consumes the builder and constructs a ServiceManagedEbsVolumeConfiguration. This method will fail if any of the following fields are not set:

Trait Implementations§

Source§

impl Clone for ServiceManagedEbsVolumeConfigurationBuilder

Source§

fn clone(&self) -> ServiceManagedEbsVolumeConfigurationBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for ServiceManagedEbsVolumeConfigurationBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for ServiceManagedEbsVolumeConfigurationBuilder

Source§

fn default() -> ServiceManagedEbsVolumeConfigurationBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for ServiceManagedEbsVolumeConfigurationBuilder

Source§

fn eq(&self, other: &ServiceManagedEbsVolumeConfigurationBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for ServiceManagedEbsVolumeConfigurationBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,