#[non_exhaustive]pub struct ListServicesInput {
pub cluster: Option<String>,
pub next_token: Option<String>,
pub max_results: Option<i32>,
pub launch_type: Option<LaunchType>,
pub scheduling_strategy: Option<SchedulingStrategy>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.cluster: Option<String>
The short name or full Amazon Resource Name (ARN) of the cluster to use when filtering the ListServices
results. If you do not specify a cluster, the default cluster is assumed.
next_token: Option<String>
The nextToken
value returned from a ListServices
request indicating that more results are available to fulfill the request and further calls will be needed. If maxResults
was provided, it is possible the number of results to be fewer than maxResults
.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
max_results: Option<i32>
The maximum number of service results that ListServices
returned in paginated output. When this parameter is used, ListServices
only returns maxResults
results in a single page along with a nextToken
response element. The remaining results of the initial request can be seen by sending another ListServices
request with the returned nextToken
value. This value can be between 1 and 100. If this parameter isn't used, then ListServices
returns up to 10 results and a nextToken
value if applicable.
launch_type: Option<LaunchType>
The launch type to use when filtering the ListServices
results.
scheduling_strategy: Option<SchedulingStrategy>
The scheduling strategy to use when filtering the ListServices
results.
Implementations§
Source§impl ListServicesInput
impl ListServicesInput
Sourcepub fn cluster(&self) -> Option<&str>
pub fn cluster(&self) -> Option<&str>
The short name or full Amazon Resource Name (ARN) of the cluster to use when filtering the ListServices
results. If you do not specify a cluster, the default cluster is assumed.
Sourcepub fn next_token(&self) -> Option<&str>
pub fn next_token(&self) -> Option<&str>
The nextToken
value returned from a ListServices
request indicating that more results are available to fulfill the request and further calls will be needed. If maxResults
was provided, it is possible the number of results to be fewer than maxResults
.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn max_results(&self) -> Option<i32>
pub fn max_results(&self) -> Option<i32>
The maximum number of service results that ListServices
returned in paginated output. When this parameter is used, ListServices
only returns maxResults
results in a single page along with a nextToken
response element. The remaining results of the initial request can be seen by sending another ListServices
request with the returned nextToken
value. This value can be between 1 and 100. If this parameter isn't used, then ListServices
returns up to 10 results and a nextToken
value if applicable.
Sourcepub fn launch_type(&self) -> Option<&LaunchType>
pub fn launch_type(&self) -> Option<&LaunchType>
The launch type to use when filtering the ListServices
results.
Sourcepub fn scheduling_strategy(&self) -> Option<&SchedulingStrategy>
pub fn scheduling_strategy(&self) -> Option<&SchedulingStrategy>
The scheduling strategy to use when filtering the ListServices
results.
Source§impl ListServicesInput
impl ListServicesInput
Sourcepub fn builder() -> ListServicesInputBuilder
pub fn builder() -> ListServicesInputBuilder
Creates a new builder-style object to manufacture ListServicesInput
.
Trait Implementations§
Source§impl Clone for ListServicesInput
impl Clone for ListServicesInput
Source§fn clone(&self) -> ListServicesInput
fn clone(&self) -> ListServicesInput
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for ListServicesInput
impl Debug for ListServicesInput
Source§impl PartialEq for ListServicesInput
impl PartialEq for ListServicesInput
impl StructuralPartialEq for ListServicesInput
Auto Trait Implementations§
impl Freeze for ListServicesInput
impl RefUnwindSafe for ListServicesInput
impl Send for ListServicesInput
impl Sync for ListServicesInput
impl Unpin for ListServicesInput
impl UnwindSafe for ListServicesInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);