Struct aws_sdk_ecs::operation::run_task::RunTaskInput

#[non_exhaustive]
pub struct RunTaskInput {

    pub capacity_provider_strategy: Option<Vec<CapacityProviderStrategyItem>>,
    pub cluster: Option<String>,
    pub count: Option<i32>,
    pub enable_ecs_managed_tags: Option<bool>,
    pub enable_execute_command: Option<bool>,
    pub group: Option<String>,
    pub launch_type: Option<LaunchType>,
    pub network_configuration: Option<NetworkConfiguration>,
    pub overrides: Option<TaskOverride>,
    pub placement_constraints: Option<Vec<PlacementConstraint>>,
    pub placement_strategy: Option<Vec<PlacementStrategy>>,
    pub platform_version: Option<String>,
    pub propagate_tags: Option<PropagateTags>,
    pub reference_id: Option<String>,
    pub started_by: Option<String>,
    pub tags: Option<Vec<Tag>>,
    pub task_definition: Option<String>,
    pub client_token: Option<String>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

capacity_provider_strategy: Option<Vec<CapacityProviderStrategyItem>>

The capacity provider strategy to use for the task.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

A capacity provider strategy may contain a maximum of 6 capacity providers.

cluster: Option<String>

The short name or full Amazon Resource Name (ARN) of the cluster to run your task on. If you do not specify a cluster, the default cluster is assumed.

count: Option<i32>

The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks for each call.

enable_ecs_managed_tags: Option<bool>

Specifies whether to use Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.

enable_execute_command: Option<bool>

Determines whether to use the execute command functionality for the containers in this task. If true, this enables execute command functionality on all containers in the task.

If true, then the task definition must have a task role, or you must provide one as an override.

group: Option<String>

The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).

launch_type: Option<LaunchType>

The infrastructure to run your standalone task on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS User Guide for Fargate.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.

A task can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

network_configuration: Option<NetworkConfiguration>

The network configuration for the task. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

overrides: Option<TaskOverride>

A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that's specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.

A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.

placement_constraints: Option<Vec<PlacementConstraint>>

An array of placement constraint objects to use for the task. You can specify up to 10 constraints for each task (including constraints in the task definition and those specified at runtime).

placement_strategy: Option<Vec<PlacementStrategy>>

The placement strategy objects to use for the task. You can specify a maximum of 5 strategy rules for each task.

platform_version: Option<String>

The platform version the task uses. A platform version is only specified for tasks hosted on Fargate. If one isn't specified, the LATEST platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

propagate_tags: Option<PropagateTags>

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

An error will be received if you specify the SERVICE option when running a task.

reference_id: Option<String>

The reference ID to use for the task. The reference ID can have a maximum length of 1024 characters.

started_by: Option<String>

An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 128 letters (uppercase and lowercase), numbers, hyphens (-), and underscores (_) are allowed.

If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.

tags: Option<Vec<Tag>>

The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.

The following basic restrictions apply to tags:

• Maximum number of tags per resource - 50

• For each resource, each tag key must be unique, and each tag key can have only one value.

• Maximum key length - 128 Unicode characters in UTF-8

• Maximum value length - 256 Unicode characters in UTF-8

• If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

• Tag keys and values are case-sensitive.

• Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

task_definition: Option<String>

The family and revision (family:revision) or full ARN of the task definition to run. If a revision isn't specified, the latest ACTIVE revision is used.

When you create a policy for run-task, you can set the resource to be the latest task definition revision, or a specific revision.

The full ARN value must match the value that you specified as the Resource of the principal's permissions policy.

When you specify the policy resource as the latest task definition version (by setting the Resource in the policy to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName), then set this value to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName.

When you specify the policy resource as a specific task definition version (by setting the Resource in the policy to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:1 or arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:*), then set this value to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:1.

For more information, see Policy Resources for Amazon ECS in the Amazon Elastic Container Service developer Guide.

client_token: Option<String>

An identifier that you provide to ensure the idempotency of the request. It must be unique and is case sensitive. Up to 64 characters are allowed. The valid characters are characters in the range of 33-126, inclusive. For more information, see Ensuring idempotency.

Implementations

impl RunTaskInput

pub fn capacity_provider_strategy(&self) -> &[CapacityProviderStrategyItem]

The capacity provider strategy to use for the task.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

A capacity provider strategy may contain a maximum of 6 capacity providers.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .capacity_provider_strategy.is_none().

pub fn cluster(&self) -> Option<&str>

The short name or full Amazon Resource Name (ARN) of the cluster to run your task on. If you do not specify a cluster, the default cluster is assumed.

pub fn count(&self) -> Option<i32>

The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks for each call.

pub fn enable_ecs_managed_tags(&self) -> Option<bool>

Specifies whether to use Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.

pub fn enable_execute_command(&self) -> Option<bool>

Determines whether to use the execute command functionality for the containers in this task. If true, this enables execute command functionality on all containers in the task.

If true, then the task definition must have a task role, or you must provide one as an override.

pub fn group(&self) -> Option<&str>

The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).

pub fn launch_type(&self) -> Option<&LaunchType>

The infrastructure to run your standalone task on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS User Guide for Fargate.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.

A task can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

pub fn network_configuration(&self) -> Option<&NetworkConfiguration>

The network configuration for the task. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

pub fn overrides(&self) -> Option<&TaskOverride>

A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that's specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.

A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.

pub fn placement_constraints(&self) -> &[PlacementConstraint]

An array of placement constraint objects to use for the task. You can specify up to 10 constraints for each task (including constraints in the task definition and those specified at runtime).

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .placement_constraints.is_none().

pub fn placement_strategy(&self) -> &[PlacementStrategy]

The placement strategy objects to use for the task. You can specify a maximum of 5 strategy rules for each task.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .placement_strategy.is_none().

pub fn platform_version(&self) -> Option<&str>

The platform version the task uses. A platform version is only specified for tasks hosted on Fargate. If one isn't specified, the LATEST platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

pub fn propagate_tags(&self) -> Option<&PropagateTags>

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

An error will be received if you specify the SERVICE option when running a task.

pub fn reference_id(&self) -> Option<&str>

The reference ID to use for the task. The reference ID can have a maximum length of 1024 characters.

pub fn started_by(&self) -> Option<&str>

An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 128 letters (uppercase and lowercase), numbers, hyphens (-), and underscores (_) are allowed.

If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.

pub fn tags(&self) -> &[Tag]

The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.

The following basic restrictions apply to tags:

• Maximum number of tags per resource - 50

• For each resource, each tag key must be unique, and each tag key can have only one value.

• Maximum key length - 128 Unicode characters in UTF-8

• Maximum value length - 256 Unicode characters in UTF-8

• If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

• Tag keys and values are case-sensitive.

• Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().

pub fn task_definition(&self) -> Option<&str>

The family and revision (family:revision) or full ARN of the task definition to run. If a revision isn't specified, the latest ACTIVE revision is used.

When you create a policy for run-task, you can set the resource to be the latest task definition revision, or a specific revision.

The full ARN value must match the value that you specified as the Resource of the principal's permissions policy.

When you specify the policy resource as the latest task definition version (by setting the Resource in the policy to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName), then set this value to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName.

When you specify the policy resource as a specific task definition version (by setting the Resource in the policy to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:1 or arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:*), then set this value to arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:1.

For more information, see Policy Resources for Amazon ECS in the Amazon Elastic Container Service developer Guide.

pub fn client_token(&self) -> Option<&str>

An identifier that you provide to ensure the idempotency of the request. It must be unique and is case sensitive. Up to 64 characters are allowed. The valid characters are characters in the range of 33-126, inclusive. For more information, see Ensuring idempotency.

impl RunTaskInput

pub fn builder() -> RunTaskInputBuilder

Creates a new builder-style object to manufacture RunTaskInput.

Trait Implementations

impl Clone for RunTaskInput

fn clone(&self) -> RunTaskInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for RunTaskInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for RunTaskInput

fn eq(&self, other: &RunTaskInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for RunTaskInput