Struct CreateServiceFluentBuilder

pub struct CreateServiceFluentBuilder { /* private fields */ }

Fluent builder constructing a request to CreateService.

Runs and maintains your desired number of tasks from a specified task definition. If the number of tasks running in a service drops below the desiredCount, Amazon ECS runs another copy of the task in the specified cluster. To update an existing service, use UpdateService.

On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.

Amazon Elastic Inference (EI) is no longer available to customers.

In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind one or more load balancers. The load balancers distribute traffic across the tasks that are associated with the service. For more information, see Service load balancing in the Amazon Elastic Container Service Developer Guide.

You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. volumeConfigurations is only supported for REPLICA service and not DAEMON service. For more information, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.

Tasks for services that don't use a load balancer are considered healthy if they're in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING state and are reported as healthy by the load balancer.

There are two service scheduler strategies available:

• REPLICA - The replica scheduling strategy places and maintains your desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. For more information, see Service scheduler concepts in the Amazon Elastic Container Service Developer Guide.

• DAEMON - The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks. It also stops tasks that don't meet the placement constraints. When using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. For more information, see Service scheduler concepts in the Amazon Elastic Container Service Developer Guide.

You can optionally specify a deployment configuration for your service. The deployment is initiated by changing properties. For example, the deployment might be initiated by the task definition or by your desired count of a service. You can use UpdateService. The default value for a replica service for minimumHealthyPercent is 100%. The default value for a daemon service for minimumHealthyPercent is 0%.

If a service uses the ECS deployment controller, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment. Specifically, it represents it as a percentage of your desired number of tasks (rounded up to the nearest integer). This happens when any of your container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. Using this parameter, you can deploy without using additional cluster capacity. For example, if you set your service to have desired number of four tasks and a minimum healthy percent of 50%, the scheduler might stop two existing tasks to free up cluster capacity before starting two new tasks. If they're in the RUNNING state, tasks for services that don't use a load balancer are considered healthy . If they're in the RUNNING state and reported as healthy by the load balancer, tasks for services that do use a load balancer are considered healthy . The default value for minimum healthy percent is 100%.

If a service uses the ECS deployment controller, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment. Specifically, it represents it as a percentage of the desired number of tasks (rounded down to the nearest integer). This happens when any of your container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. Using this parameter, you can define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.

If a service uses either the CODE_DEPLOY or EXTERNAL deployment controller types and tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are used only to define the lower and upper limit on the number of the tasks in the service that remain in the RUNNING state. This is while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent and maximum percent values aren't used. This is the case even if they're currently visible when describing your service.

When creating a service that uses the EXTERNAL deployment controller, you can specify only parameters that aren't controlled at the task set level. The only required parameter is the service name. You control your services using the CreateTaskSet. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.

When the service scheduler launches new tasks, it determines task placement. For information about task placement and task placement strategies, see Amazon ECS task placement in the Amazon Elastic Container Service Developer Guide

Implementations

impl CreateServiceFluentBuilder

pub fn as_input(&self) -> &CreateServiceInputBuilder

Access the CreateService as a reference.

pub async fn send( self, ) -> Result<CreateServiceOutput, SdkError<CreateServiceError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self, ) -> CustomizableOperation<CreateServiceOutput, CreateServiceError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn cluster(self, input: impl Into<String>) -> Self

The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.

pub fn set_cluster(self, input: Option<String>) -> Self

The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.

pub fn get_cluster(&self) -> &Option<String>

The short name or full Amazon Resource Name (ARN) of the cluster that you run your service on. If you do not specify a cluster, the default cluster is assumed.

pub fn service_name(self, input: impl Into<String>) -> Self

The name of your service. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.

pub fn set_service_name(self, input: Option<String>) -> Self

The name of your service. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.

pub fn get_service_name(&self) -> &Option<String>

The name of your service. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.

pub fn task_definition(self, input: impl Into<String>) -> Self

The family and revision (family:revision) or full ARN of the task definition to run in your service. If a revision isn't specified, the latest ACTIVE revision is used.

A task definition must be specified if the service uses either the ECS or CODE_DEPLOY deployment controllers.

For more information about deployment types, see Amazon ECS deployment types.

pub fn set_task_definition(self, input: Option<String>) -> Self

The family and revision (family:revision) or full ARN of the task definition to run in your service. If a revision isn't specified, the latest ACTIVE revision is used.

A task definition must be specified if the service uses either the ECS or CODE_DEPLOY deployment controllers.

For more information about deployment types, see Amazon ECS deployment types.

pub fn get_task_definition(&self) -> &Option<String>

The family and revision (family:revision) or full ARN of the task definition to run in your service. If a revision isn't specified, the latest ACTIVE revision is used.

A task definition must be specified if the service uses either the ECS or CODE_DEPLOY deployment controllers.

For more information about deployment types, see Amazon ECS deployment types.

pub fn availability_zone_rebalancing( self, input: AvailabilityZoneRebalancing, ) -> Self

Indicates whether to use Availability Zone rebalancing for the service.

For more information, see Balancing an Amazon ECS service across Availability Zones in the Amazon Elastic Container Service Developer Guide .

pub fn set_availability_zone_rebalancing( self, input: Option<AvailabilityZoneRebalancing>, ) -> Self

Indicates whether to use Availability Zone rebalancing for the service.

For more information, see Balancing an Amazon ECS service across Availability Zones in the Amazon Elastic Container Service Developer Guide .

pub fn get_availability_zone_rebalancing( &self, ) -> &Option<AvailabilityZoneRebalancing>

Indicates whether to use Availability Zone rebalancing for the service.

For more information, see Balancing an Amazon ECS service across Availability Zones in the Amazon Elastic Container Service Developer Guide .

pub fn load_balancers(self, input: LoadBalancer) -> Self

Appends an item to loadBalancers.

To override the contents of this collection use set_load_balancers.

A load balancer object representing the load balancers to use with your service. For more information, see Service load balancing in the Amazon Elastic Container Service Developer Guide.

If the service uses the rolling update (ECS) deployment controller and using either an Application Load Balancer or Network Load Balancer, you must specify one or more target group ARNs to attach to the service. The service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.

If the service uses the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When creating an CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). During a deployment, CodeDeploy determines which task set in your service has the status PRIMARY, and it associates one target group with it. Then, it also associates the other target group with the replacement task set. The load balancer can also have up to two listeners: a required listener for production traffic and an optional listener that you can use to perform validation tests with Lambda functions before routing production traffic to it.

If you use the CODE_DEPLOY deployment controller, these values can be changed when updating the service.

For Application Load Balancers and Network Load Balancers, this object must contain the load balancer target group ARN, the container name, and the container port to access from the load balancer. The container name must be as it appears in a container definition. The load balancer name parameter must be omitted. When a task from this service is placed on a container instance, the container instance and port combination is registered as a target in the target group that's specified here.

For Classic Load Balancers, this object must contain the load balancer name, the container name , and the container port to access from the load balancer. The container name must be as it appears in a container definition. The target group ARN parameter must be omitted. When a task from this service is placed on a container instance, the container instance is registered with the load balancer that's specified here.

Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers aren't supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. This is because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.

pub fn set_load_balancers(self, input: Option<Vec<LoadBalancer>>) -> Self

A load balancer object representing the load balancers to use with your service. For more information, see Service load balancing in the Amazon Elastic Container Service Developer Guide.

If the service uses the rolling update (ECS) deployment controller and using either an Application Load Balancer or Network Load Balancer, you must specify one or more target group ARNs to attach to the service. The service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.

If the service uses the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When creating an CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). During a deployment, CodeDeploy determines which task set in your service has the status PRIMARY, and it associates one target group with it. Then, it also associates the other target group with the replacement task set. The load balancer can also have up to two listeners: a required listener for production traffic and an optional listener that you can use to perform validation tests with Lambda functions before routing production traffic to it.

If you use the CODE_DEPLOY deployment controller, these values can be changed when updating the service.

For Application Load Balancers and Network Load Balancers, this object must contain the load balancer target group ARN, the container name, and the container port to access from the load balancer. The container name must be as it appears in a container definition. The load balancer name parameter must be omitted. When a task from this service is placed on a container instance, the container instance and port combination is registered as a target in the target group that's specified here.

For Classic Load Balancers, this object must contain the load balancer name, the container name , and the container port to access from the load balancer. The container name must be as it appears in a container definition. The target group ARN parameter must be omitted. When a task from this service is placed on a container instance, the container instance is registered with the load balancer that's specified here.

Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers aren't supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. This is because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.

pub fn get_load_balancers(&self) -> &Option<Vec<LoadBalancer>>

A load balancer object representing the load balancers to use with your service. For more information, see Service load balancing in the Amazon Elastic Container Service Developer Guide.

If the service uses the rolling update (ECS) deployment controller and using either an Application Load Balancer or Network Load Balancer, you must specify one or more target group ARNs to attach to the service. The service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.

If the service uses the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When creating an CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). During a deployment, CodeDeploy determines which task set in your service has the status PRIMARY, and it associates one target group with it. Then, it also associates the other target group with the replacement task set. The load balancer can also have up to two listeners: a required listener for production traffic and an optional listener that you can use to perform validation tests with Lambda functions before routing production traffic to it.

If you use the CODE_DEPLOY deployment controller, these values can be changed when updating the service.

For Application Load Balancers and Network Load Balancers, this object must contain the load balancer target group ARN, the container name, and the container port to access from the load balancer. The container name must be as it appears in a container definition. The load balancer name parameter must be omitted. When a task from this service is placed on a container instance, the container instance and port combination is registered as a target in the target group that's specified here.

For Classic Load Balancers, this object must contain the load balancer name, the container name , and the container port to access from the load balancer. The container name must be as it appears in a container definition. The target group ARN parameter must be omitted. When a task from this service is placed on a container instance, the container instance is registered with the load balancer that's specified here.

Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers aren't supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. This is because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.

pub fn service_registries(self, input: ServiceRegistry) -> Self

Appends an item to serviceRegistries.

To override the contents of this collection use set_service_registries.

The details of the service discovery registry to associate with this service. For more information, see Service discovery.

Each service may be associated with one service registry. Multiple service registries for each service isn't supported.

pub fn set_service_registries(self, input: Option<Vec<ServiceRegistry>>) -> Self

The details of the service discovery registry to associate with this service. For more information, see Service discovery.

Each service may be associated with one service registry. Multiple service registries for each service isn't supported.

pub fn get_service_registries(&self) -> &Option<Vec<ServiceRegistry>>

The details of the service discovery registry to associate with this service. For more information, see Service discovery.

Each service may be associated with one service registry. Multiple service registries for each service isn't supported.

pub fn desired_count(self, input: i32) -> Self

The number of instantiations of the specified task definition to place and keep running in your service.

This is required if schedulingStrategy is REPLICA or isn't specified. If schedulingStrategy is DAEMON then this isn't required.

pub fn set_desired_count(self, input: Option<i32>) -> Self

The number of instantiations of the specified task definition to place and keep running in your service.

This is required if schedulingStrategy is REPLICA or isn't specified. If schedulingStrategy is DAEMON then this isn't required.

pub fn get_desired_count(&self) -> &Option<i32>

The number of instantiations of the specified task definition to place and keep running in your service.

This is required if schedulingStrategy is REPLICA or isn't specified. If schedulingStrategy is DAEMON then this isn't required.

pub fn client_token(self, input: impl Into<String>) -> Self

An identifier that you provide to ensure the idempotency of the request. It must be unique and is case sensitive. Up to 36 ASCII characters in the range of 33-126 (inclusive) are allowed.

pub fn set_client_token(self, input: Option<String>) -> Self

An identifier that you provide to ensure the idempotency of the request. It must be unique and is case sensitive. Up to 36 ASCII characters in the range of 33-126 (inclusive) are allowed.

pub fn get_client_token(&self) -> &Option<String>

An identifier that you provide to ensure the idempotency of the request. It must be unique and is case sensitive. Up to 36 ASCII characters in the range of 33-126 (inclusive) are allowed.

pub fn launch_type(self, input: LaunchType) -> Self

The infrastructure that you run your service on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS Developer Guide.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.

A service can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

pub fn set_launch_type(self, input: Option<LaunchType>) -> Self

The infrastructure that you run your service on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS Developer Guide.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.

A service can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

pub fn get_launch_type(&self) -> &Option<LaunchType>

The infrastructure that you run your service on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS Developer Guide.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.

A service can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

pub fn capacity_provider_strategy( self, input: CapacityProviderStrategyItem, ) -> Self

Appends an item to capacityProviderStrategy.

To override the contents of this collection use set_capacity_provider_strategy.

The capacity provider strategy to use for the service.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

A capacity provider strategy can contain a maximum of 20 capacity providers.

pub fn set_capacity_provider_strategy( self, input: Option<Vec<CapacityProviderStrategyItem>>, ) -> Self

The capacity provider strategy to use for the service.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

A capacity provider strategy can contain a maximum of 20 capacity providers.

pub fn get_capacity_provider_strategy( &self, ) -> &Option<Vec<CapacityProviderStrategyItem>>

The capacity provider strategy to use for the service.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

A capacity provider strategy can contain a maximum of 20 capacity providers.

pub fn platform_version(self, input: impl Into<String>) -> Self

The platform version that your tasks in the service are running on. A platform version is specified only for tasks using the Fargate launch type. If one isn't specified, the LATEST platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

pub fn set_platform_version(self, input: Option<String>) -> Self

The platform version that your tasks in the service are running on. A platform version is specified only for tasks using the Fargate launch type. If one isn't specified, the LATEST platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

pub fn get_platform_version(&self) -> &Option<String>

The platform version that your tasks in the service are running on. A platform version is specified only for tasks using the Fargate launch type. If one isn't specified, the LATEST platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

pub fn role(self, input: impl Into<String>) -> Self

The name or full Amazon Resource Name (ARN) of the IAM role that allows Amazon ECS to make calls to your load balancer on your behalf. This parameter is only permitted if you are using a load balancer with your service and your task definition doesn't use the awsvpc network mode. If you specify the role parameter, you must also specify a load balancer object with the loadBalancers parameter.

If your account has already created the Amazon ECS service-linked role, that role is used for your service unless you specify a role here. The service-linked role is required if your task definition uses the awsvpc network mode or if the service is configured to use service discovery, an external deployment controller, multiple target groups, or Elastic Inference accelerators in which case you don't specify a role here. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.

If your specified role has a path other than /, then you must either specify the full role ARN (this is recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/ then you would specify /foo/bar as the role name. For more information, see Friendly names and paths in the IAM User Guide.

pub fn set_role(self, input: Option<String>) -> Self

The name or full Amazon Resource Name (ARN) of the IAM role that allows Amazon ECS to make calls to your load balancer on your behalf. This parameter is only permitted if you are using a load balancer with your service and your task definition doesn't use the awsvpc network mode. If you specify the role parameter, you must also specify a load balancer object with the loadBalancers parameter.

If your account has already created the Amazon ECS service-linked role, that role is used for your service unless you specify a role here. The service-linked role is required if your task definition uses the awsvpc network mode or if the service is configured to use service discovery, an external deployment controller, multiple target groups, or Elastic Inference accelerators in which case you don't specify a role here. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.

If your specified role has a path other than /, then you must either specify the full role ARN (this is recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/ then you would specify /foo/bar as the role name. For more information, see Friendly names and paths in the IAM User Guide.

pub fn get_role(&self) -> &Option<String>

The name or full Amazon Resource Name (ARN) of the IAM role that allows Amazon ECS to make calls to your load balancer on your behalf. This parameter is only permitted if you are using a load balancer with your service and your task definition doesn't use the awsvpc network mode. If you specify the role parameter, you must also specify a load balancer object with the loadBalancers parameter.

If your account has already created the Amazon ECS service-linked role, that role is used for your service unless you specify a role here. The service-linked role is required if your task definition uses the awsvpc network mode or if the service is configured to use service discovery, an external deployment controller, multiple target groups, or Elastic Inference accelerators in which case you don't specify a role here. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.

If your specified role has a path other than /, then you must either specify the full role ARN (this is recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/ then you would specify /foo/bar as the role name. For more information, see Friendly names and paths in the IAM User Guide.

pub fn deployment_configuration(self, input: DeploymentConfiguration) -> Self

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

pub fn set_deployment_configuration( self, input: Option<DeploymentConfiguration>, ) -> Self

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

pub fn get_deployment_configuration(&self) -> &Option<DeploymentConfiguration>

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.

pub fn placement_constraints(self, input: PlacementConstraint) -> Self

Appends an item to placementConstraints.

To override the contents of this collection use set_placement_constraints.

An array of placement constraint objects to use for tasks in your service. You can specify a maximum of 10 constraints for each task. This limit includes constraints in the task definition and those specified at runtime.

pub fn set_placement_constraints( self, input: Option<Vec<PlacementConstraint>>, ) -> Self

An array of placement constraint objects to use for tasks in your service. You can specify a maximum of 10 constraints for each task. This limit includes constraints in the task definition and those specified at runtime.

pub fn get_placement_constraints(&self) -> &Option<Vec<PlacementConstraint>>

An array of placement constraint objects to use for tasks in your service. You can specify a maximum of 10 constraints for each task. This limit includes constraints in the task definition and those specified at runtime.

pub fn placement_strategy(self, input: PlacementStrategy) -> Self

Appends an item to placementStrategy.

To override the contents of this collection use set_placement_strategy.

The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.

pub fn set_placement_strategy( self, input: Option<Vec<PlacementStrategy>>, ) -> Self

The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.

pub fn get_placement_strategy(&self) -> &Option<Vec<PlacementStrategy>>

The placement strategy objects to use for tasks in your service. You can specify a maximum of 5 strategy rules for each service.

pub fn network_configuration(self, input: NetworkConfiguration) -> Self

The network configuration for the service. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

pub fn set_network_configuration( self, input: Option<NetworkConfiguration>, ) -> Self

The network configuration for the service. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

pub fn get_network_configuration(&self) -> &Option<NetworkConfiguration>

The network configuration for the service. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

pub fn health_check_grace_period_seconds(self, input: i32) -> Self

The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing, VPC Lattice, and container health checks after a task has first started. If you don't specify a health check grace period value, the default value of 0 is used. If you don't use any of the health checks, then healthCheckGracePeriodSeconds is unused.

If your service's tasks take a while to start and respond to health checks, you can specify a health check grace period of up to 2,147,483,647 seconds (about 69 years). During that time, the Amazon ECS service scheduler ignores health check status. This grace period can prevent the service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.

pub fn set_health_check_grace_period_seconds(self, input: Option<i32>) -> Self

The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing, VPC Lattice, and container health checks after a task has first started. If you don't specify a health check grace period value, the default value of 0 is used. If you don't use any of the health checks, then healthCheckGracePeriodSeconds is unused.

If your service's tasks take a while to start and respond to health checks, you can specify a health check grace period of up to 2,147,483,647 seconds (about 69 years). During that time, the Amazon ECS service scheduler ignores health check status. This grace period can prevent the service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.

pub fn get_health_check_grace_period_seconds(&self) -> &Option<i32>

The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing, VPC Lattice, and container health checks after a task has first started. If you don't specify a health check grace period value, the default value of 0 is used. If you don't use any of the health checks, then healthCheckGracePeriodSeconds is unused.

If your service's tasks take a while to start and respond to health checks, you can specify a health check grace period of up to 2,147,483,647 seconds (about 69 years). During that time, the Amazon ECS service scheduler ignores health check status. This grace period can prevent the service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.

pub fn scheduling_strategy(self, input: SchedulingStrategy) -> Self

The scheduling strategy to use for the service. For more information, see Services.

There are two service scheduler strategies available:

• REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses the CODE_DEPLOY or EXTERNAL deployment controller types.

• DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies.

  Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.

pub fn set_scheduling_strategy(self, input: Option<SchedulingStrategy>) -> Self

The scheduling strategy to use for the service. For more information, see Services.

There are two service scheduler strategies available:

• REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses the CODE_DEPLOY or EXTERNAL deployment controller types.

• DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies.

  Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.

pub fn get_scheduling_strategy(&self) -> &Option<SchedulingStrategy>

The scheduling strategy to use for the service. For more information, see Services.

There are two service scheduler strategies available:

• REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service uses the CODE_DEPLOY or EXTERNAL deployment controller types.

• DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that don't meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies.

  Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.

pub fn deployment_controller(self, input: DeploymentController) -> Self

The deployment controller to use for the service. If no deployment controller is specified, the default value of ECS is used.

pub fn set_deployment_controller( self, input: Option<DeploymentController>, ) -> Self

The deployment controller to use for the service. If no deployment controller is specified, the default value of ECS is used.

pub fn get_deployment_controller(&self) -> &Option<DeploymentController>

The deployment controller to use for the service. If no deployment controller is specified, the default value of ECS is used.

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. When a service is deleted, the tags are deleted as well.

The following basic restrictions apply to tags:

• Maximum number of tags per resource - 50

• For each resource, each tag key must be unique, and each tag key can have only one value.

• Maximum key length - 128 Unicode characters in UTF-8

• Maximum value length - 256 Unicode characters in UTF-8

• If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

• Tag keys and values are case-sensitive.

• Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. When a service is deleted, the tags are deleted as well.

The following basic restrictions apply to tags:

• Maximum number of tags per resource - 50

• For each resource, each tag key must be unique, and each tag key can have only one value.

• Maximum key length - 128 Unicode characters in UTF-8

• Maximum value length - 256 Unicode characters in UTF-8

• If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

• Tag keys and values are case-sensitive.

• Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

pub fn get_tags(&self) -> &Option<Vec<Tag>>

The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. When a service is deleted, the tags are deleted as well.

The following basic restrictions apply to tags:

• Maximum number of tags per resource - 50

• For each resource, each tag key must be unique, and each tag key can have only one value.

• Maximum key length - 128 Unicode characters in UTF-8

• Maximum value length - 256 Unicode characters in UTF-8

• If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

• Tag keys and values are case-sensitive.

• Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

pub fn enable_ecs_managed_tags(self, input: bool) -> Self

Specifies whether to turn on Amazon ECS managed tags for the tasks within the service. For more information, see Tagging your Amazon ECS resources in the Amazon Elastic Container Service Developer Guide.

When you use Amazon ECS managed tags, you need to set the propagateTags request parameter.

pub fn set_enable_ecs_managed_tags(self, input: Option<bool>) -> Self

Specifies whether to turn on Amazon ECS managed tags for the tasks within the service. For more information, see Tagging your Amazon ECS resources in the Amazon Elastic Container Service Developer Guide.

When you use Amazon ECS managed tags, you need to set the propagateTags request parameter.

pub fn get_enable_ecs_managed_tags(&self) -> &Option<bool>

Specifies whether to turn on Amazon ECS managed tags for the tasks within the service. For more information, see Tagging your Amazon ECS resources in the Amazon Elastic Container Service Developer Guide.

When you use Amazon ECS managed tags, you need to set the propagateTags request parameter.

pub fn propagate_tags(self, input: PropagateTags) -> Self

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

You must set this to a value other than NONE when you use Cost Explorer. For more information, see Amazon ECS usage reports in the Amazon Elastic Container Service Developer Guide.

The default is NONE.

pub fn set_propagate_tags(self, input: Option<PropagateTags>) -> Self

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

You must set this to a value other than NONE when you use Cost Explorer. For more information, see Amazon ECS usage reports in the Amazon Elastic Container Service Developer Guide.

The default is NONE.

pub fn get_propagate_tags(&self) -> &Option<PropagateTags>

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

You must set this to a value other than NONE when you use Cost Explorer. For more information, see Amazon ECS usage reports in the Amazon Elastic Container Service Developer Guide.

The default is NONE.

pub fn enable_execute_command(self, input: bool) -> Self

Determines whether the execute command functionality is turned on for the service. If true, this enables execute command functionality on all containers in the service tasks.

pub fn set_enable_execute_command(self, input: Option<bool>) -> Self

Determines whether the execute command functionality is turned on for the service. If true, this enables execute command functionality on all containers in the service tasks.

pub fn get_enable_execute_command(&self) -> &Option<bool>

Determines whether the execute command functionality is turned on for the service. If true, this enables execute command functionality on all containers in the service tasks.

pub fn service_connect_configuration( self, input: ServiceConnectConfiguration, ) -> Self

The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.

Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

pub fn set_service_connect_configuration( self, input: Option<ServiceConnectConfiguration>, ) -> Self

The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.

Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

pub fn get_service_connect_configuration( &self, ) -> &Option<ServiceConnectConfiguration>

The configuration for this service to discover and connect to services, and be discovered by, and connected from, other services within a namespace.

Tasks that run in a namespace can use short names to connect to services in the namespace. Tasks can connect to services across all of the clusters in the namespace. Tasks connect through a managed proxy container that collects logs and metrics for increased visibility. Only the tasks that Amazon ECS services create are supported with Service Connect. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.

pub fn volume_configurations(self, input: ServiceVolumeConfiguration) -> Self

Appends an item to volumeConfigurations.

To override the contents of this collection use set_volume_configurations.

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

pub fn set_volume_configurations( self, input: Option<Vec<ServiceVolumeConfiguration>>, ) -> Self

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

pub fn get_volume_configurations( &self, ) -> &Option<Vec<ServiceVolumeConfiguration>>

The configuration for a volume specified in the task definition as a volume that is configured at launch time. Currently, the only supported volume type is an Amazon EBS volume.

pub fn vpc_lattice_configurations(self, input: VpcLatticeConfiguration) -> Self

Appends an item to vpcLatticeConfigurations.

To override the contents of this collection use set_vpc_lattice_configurations.

The VPC Lattice configuration for the service being created.

pub fn set_vpc_lattice_configurations( self, input: Option<Vec<VpcLatticeConfiguration>>, ) -> Self

The VPC Lattice configuration for the service being created.

pub fn get_vpc_lattice_configurations( &self, ) -> &Option<Vec<VpcLatticeConfiguration>>

The VPC Lattice configuration for the service being created.

Trait Implementations

impl Clone for CreateServiceFluentBuilder

fn clone(&self) -> CreateServiceFluentBuilder

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateServiceFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.