Struct aws_sdk_ecs::input::run_task_input::Builder

source · [−]

#[non_exhaustive]
pub struct Builder { /* private fields */ }

Expand description

A builder for RunTaskInput

Implementations

source

impl Builder

source

pub fn capacity_provider_strategy(
self,
input: CapacityProviderStrategyItem
) -> Self

Appends an item to capacity_provider_strategy.

To override the contents of this collection use set_capacity_provider_strategy.

The capacity provider strategy to use for the task.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

A capacity provider strategy may contain a maximum of 6 capacity providers.

source

pub fn set_capacity_provider_strategy(
self,
input: Option<Vec<CapacityProviderStrategyItem>>
) -> Self

The capacity provider strategy to use for the task.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

A capacity provider strategy may contain a maximum of 6 capacity providers.

source

pub fn cluster(self, input: impl Into<String>) -> Self

The short name or full Amazon Resource Name (ARN) of the cluster to run your task on. If you do not specify a cluster, the default cluster is assumed.

source

pub fn set_cluster(self, input: Option<String>) -> Self

The short name or full Amazon Resource Name (ARN) of the cluster to run your task on. If you do not specify a cluster, the default cluster is assumed.

source

pub fn count(self, input: i32) -> Self

The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks for each call.

source

pub fn set_count(self, input: Option<i32>) -> Self

The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks for each call.

source

pub fn enable_ecs_managed_tags(self, input: bool) -> Self

Specifies whether to enable Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.

source

pub fn set_enable_ecs_managed_tags(self, input: Option<bool>) -> Self

Specifies whether to enable Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.

source

pub fn enable_execute_command(self, input: bool) -> Self

Determines whether to enable the execute command functionality for the containers in this task. If true, this enables execute command functionality on all containers in the task.

source

pub fn set_enable_execute_command(self, input: Option<bool>) -> Self

Determines whether to enable the execute command functionality for the containers in this task. If true, this enables execute command functionality on all containers in the task.

source

pub fn group(self, input: impl Into<String>) -> Self

The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).

source

pub fn set_group(self, input: Option<String>) -> Self

The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).

source

pub fn launch_type(self, input: LaunchType) -> Self

The infrastructure to run your standalone task on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS User Guide for Fargate.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.

A task can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

source

pub fn set_launch_type(self, input: Option<LaunchType>) -> Self

The infrastructure to run your standalone task on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS User Guide for Fargate.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.

A task can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

source

pub fn network_configuration(self, input: NetworkConfiguration) -> Self

The network configuration for the task. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

source

pub fn set_network_configuration(
self,
input: Option<NetworkConfiguration>
) -> Self

The network configuration for the task. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

source

pub fn overrides(self, input: TaskOverride) -> Self

A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that's specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.

A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.

source

pub fn set_overrides(self, input: Option<TaskOverride>) -> Self

A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that's specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.

A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.

source

pub fn placement_constraints(self, input: PlacementConstraint) -> Self

Appends an item to placement_constraints.

To override the contents of this collection use set_placement_constraints.

An array of placement constraint objects to use for the task. You can specify up to 10 constraints for each task (including constraints in the task definition and those specified at runtime).

source

pub fn set_placement_constraints(
self,
input: Option<Vec<PlacementConstraint>>
) -> Self

An array of placement constraint objects to use for the task. You can specify up to 10 constraints for each task (including constraints in the task definition and those specified at runtime).

source

pub fn placement_strategy(self, input: PlacementStrategy) -> Self

Appends an item to placement_strategy.

To override the contents of this collection use set_placement_strategy.

The placement strategy objects to use for the task. You can specify a maximum of 5 strategy rules for each task.

source

pub fn set_placement_strategy(
self,
input: Option<Vec<PlacementStrategy>>
) -> Self

The placement strategy objects to use for the task. You can specify a maximum of 5 strategy rules for each task.

source

pub fn platform_version(self, input: impl Into<String>) -> Self

The platform version the task uses. A platform version is only specified for tasks hosted on Fargate. If one isn't specified, the LATEST platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

source

pub fn set_platform_version(self, input: Option<String>) -> Self

The platform version the task uses. A platform version is only specified for tasks hosted on Fargate. If one isn't specified, the LATEST platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

source

pub fn propagate_tags(self, input: PropagateTags) -> Self

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

An error will be received if you specify the SERVICE option when running a task.

source

pub fn set_propagate_tags(self, input: Option<PropagateTags>) -> Self

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

An error will be received if you specify the SERVICE option when running a task.

source

pub fn reference_id(self, input: impl Into<String>) -> Self

The reference ID to use for the task. The reference ID can have a maximum length of 1024 characters.

source

pub fn set_reference_id(self, input: Option<String>) -> Self

The reference ID to use for the task. The reference ID can have a maximum length of 1024 characters.

source

pub fn started_by(self, input: impl Into<String>) -> Self

An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers, hyphens (-), and underscores (_) are allowed.

If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.

source

pub fn set_started_by(self, input: Option<String>) -> Self

An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers, hyphens (-), and underscores (_) are allowed.

If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.

source

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.

The following basic restrictions apply to tags:

Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

source

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.

The following basic restrictions apply to tags:

Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

source

pub fn task_definition(self, input: impl Into<String>) -> Self

The family and revision (family:revision) or full ARN of the task definition to run. If a revision isn't specified, the latest ACTIVE revision is used.

The full ARN value must match the value that you specified as the Resource of the IAM principal's permissions policy. For example, if the Resource is arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:*, the taskDefinition ARN value must be arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName.

source

pub fn set_task_definition(self, input: Option<String>) -> Self

The family and revision (family:revision) or full ARN of the task definition to run. If a revision isn't specified, the latest ACTIVE revision is used.

The full ARN value must match the value that you specified as the Resource of the IAM principal's permissions policy. For example, if the Resource is arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:*, the taskDefinition ARN value must be arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName.

source