Struct aws_sdk_ecs::client::fluent_builders::RunTask

pub struct RunTask<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

Fluent builder constructing a request to RunTask.

Starts a new task using the specified task definition.

You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.

Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific container instances.

The Amazon ECS API follows an eventual consistency model, due to the distributed nature of the system supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API command that immediately follows a previous API command.

To manage eventual consistency, you can do the following:

• Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing gradually up to five minutes of wait time.

• Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to about five minutes of wait time.

Implementations

impl<C, M, R> RunTask<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(self) -> Result<RunTaskOutput, SdkError<RunTaskError>> where
    R::Policy: SmithyRetryPolicy<RunTaskInputOperationOutputAlias, RunTaskOutput, RunTaskError, RunTaskInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn capacity_provider_strategy(
    self,
    inp: impl Into<CapacityProviderStrategyItem>
) -> Self

Appends an item to capacityProviderStrategy.

To override the contents of this collection use set_capacity_provider_strategy.

The capacity provider strategy to use for the task.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

A capacity provider strategy may contain a maximum of 6 capacity providers.

pub fn set_capacity_provider_strategy(
    self,
    input: Option<Vec<CapacityProviderStrategyItem>>
) -> Self

The capacity provider strategy to use for the task.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

A capacity provider strategy may contain a maximum of 6 capacity providers.

pub fn cluster(self, inp: impl Into<String>) -> Self

The short name or full Amazon Resource Name (ARN) of the cluster on which to run your task. If you do not specify a cluster, the default cluster is assumed.

pub fn set_cluster(self, input: Option<String>) -> Self

The short name or full Amazon Resource Name (ARN) of the cluster on which to run your task. If you do not specify a cluster, the default cluster is assumed.

pub fn count(self, inp: i32) -> Self

The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks per call.

pub fn set_count(self, input: Option<i32>) -> Self

The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks per call.

pub fn enable_ecs_managed_tags(self, inp: bool) -> Self

Specifies whether to enable Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.

pub fn set_enable_ecs_managed_tags(self, input: Option<bool>) -> Self

Specifies whether to enable Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.

pub fn enable_execute_command(self, inp: bool) -> Self

Whether or not to enable the execute command functionality for the containers in this task. If true, this enables execute command functionality on all containers in the task.

pub fn set_enable_execute_command(self, input: Option<bool>) -> Self

Whether or not to enable the execute command functionality for the containers in this task. If true, this enables execute command functionality on all containers in the task.

pub fn group(self, inp: impl Into<String>) -> Self

The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).

pub fn set_group(self, input: Option<String>) -> Self

The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).

pub fn launch_type(self, inp: LaunchType) -> Self

The infrastructure on which to run your standalone task. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS User Guide for Fargate.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premise server or virtual machine (VM) capacity registered to your cluster.

A task can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

pub fn set_launch_type(self, input: Option<LaunchType>) -> Self

The infrastructure on which to run your standalone task. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS User Guide for Fargate.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premise server or virtual machine (VM) capacity registered to your cluster.

A task can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

pub fn network_configuration(self, inp: NetworkConfiguration) -> Self

The network configuration for the task. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it is not supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

pub fn set_network_configuration(
    self,
    input: Option<NetworkConfiguration>
) -> Self

The network configuration for the task. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it is not supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

pub fn overrides(self, inp: TaskOverride) -> Self

A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that is specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.

A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.

pub fn set_overrides(self, input: Option<TaskOverride>) -> Self

A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that is specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.

A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.

pub fn placement_constraints(self, inp: impl Into<PlacementConstraint>) -> Self

Appends an item to placementConstraints.

To override the contents of this collection use set_placement_constraints.

An array of placement constraint objects to use for the task. You can specify up to 10 constraints per task (including constraints in the task definition and those specified at runtime).

pub fn set_placement_constraints(
    self,
    input: Option<Vec<PlacementConstraint>>
) -> Self

An array of placement constraint objects to use for the task. You can specify up to 10 constraints per task (including constraints in the task definition and those specified at runtime).

pub fn placement_strategy(self, inp: impl Into<PlacementStrategy>) -> Self

Appends an item to placementStrategy.

To override the contents of this collection use set_placement_strategy.

The placement strategy objects to use for the task. You can specify a maximum of 5 strategy rules per task.

pub fn set_placement_strategy(
    self,
    input: Option<Vec<PlacementStrategy>>
) -> Self

The placement strategy objects to use for the task. You can specify a maximum of 5 strategy rules per task.

pub fn platform_version(self, inp: impl Into<String>) -> Self

The platform version the task should use. A platform version is only specified for tasks hosted on Fargate. If one is not specified, the LATEST platform version is used by default. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

pub fn set_platform_version(self, input: Option<String>) -> Self

The platform version the task should use. A platform version is only specified for tasks hosted on Fargate. If one is not specified, the LATEST platform version is used by default. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

pub fn propagate_tags(self, inp: PropagateTags) -> Self

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags are not propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

An error will be received if you specify the SERVICE option when running a task.

pub fn set_propagate_tags(self, input: Option<PropagateTags>) -> Self

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags are not propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

An error will be received if you specify the SERVICE option when running a task.

pub fn reference_id(self, inp: impl Into<String>) -> Self

The reference ID to use for the task. The reference ID can have a maximum length of 1024 characters.

pub fn set_reference_id(self, input: Option<String>) -> Self

The reference ID to use for the task. The reference ID can have a maximum length of 1024 characters.

pub fn started_by(self, inp: impl Into<String>) -> Self

An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed.

If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.

pub fn set_started_by(self, input: Option<String>) -> Self

An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed.

If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.

pub fn tags(self, inp: impl Into<Tag>) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.

The following basic restrictions apply to tags:

• Maximum number of tags per resource - 50

• For each resource, each tag key must be unique, and each tag key can have only one value.

• Maximum key length - 128 Unicode characters in UTF-8

• Maximum value length - 256 Unicode characters in UTF-8

• If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

• Tag keys and values are case-sensitive.

• Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.

The following basic restrictions apply to tags:

• Maximum number of tags per resource - 50

• For each resource, each tag key must be unique, and each tag key can have only one value.

• Maximum key length - 128 Unicode characters in UTF-8

• Maximum value length - 256 Unicode characters in UTF-8

• If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

• Tag keys and values are case-sensitive.

• Do not use aws:, AWS:, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

pub fn task_definition(self, inp: impl Into<String>) -> Self

The family and revision (family:revision) or full ARN of the task definition to run. If a revision is not specified, the latest ACTIVE revision is used.

The full ARN value must match the value that you specified ias the Resource of the IAM principal's permissions policy. For example, if the Resource is arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:*, the taskDefinition ARN value must be arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName.

pub fn set_task_definition(self, input: Option<String>) -> Self

The family and revision (family:revision) or full ARN of the task definition to run. If a revision is not specified, the latest ACTIVE revision is used.

The full ARN value must match the value that you specified ias the Resource of the IAM principal's permissions policy. For example, if the Resource is arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:*, the taskDefinition ARN value must be arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName.

Trait Implementations

impl<C: Debug, M: Debug, R: Debug> Debug for RunTask<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.