pub struct ListImageReferrersFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ListImageReferrers.
Lists the artifacts associated with a specified subject image.
Implementations§
Source§impl ListImageReferrersFluentBuilder
impl ListImageReferrersFluentBuilder
Sourcepub fn as_input(&self) -> &ListImageReferrersInputBuilder
pub fn as_input(&self) -> &ListImageReferrersInputBuilder
Access the ListImageReferrers as a reference.
Sourcepub async fn send(
self,
) -> Result<ListImageReferrersOutput, SdkError<ListImageReferrersError, HttpResponse>>
pub async fn send( self, ) -> Result<ListImageReferrersOutput, SdkError<ListImageReferrersError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ListImageReferrersOutput, ListImageReferrersError, Self>
pub fn customize( self, ) -> CustomizableOperation<ListImageReferrersOutput, ListImageReferrersError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn registry_id(self, input: impl Into<String>) -> Self
pub fn registry_id(self, input: impl Into<String>) -> Self
The Amazon Web Services account ID associated with the registry that contains the repository in which to list image referrers. If you do not specify a registry, the default registry is assumed.
Sourcepub fn set_registry_id(self, input: Option<String>) -> Self
pub fn set_registry_id(self, input: Option<String>) -> Self
The Amazon Web Services account ID associated with the registry that contains the repository in which to list image referrers. If you do not specify a registry, the default registry is assumed.
Sourcepub fn get_registry_id(&self) -> &Option<String>
pub fn get_registry_id(&self) -> &Option<String>
The Amazon Web Services account ID associated with the registry that contains the repository in which to list image referrers. If you do not specify a registry, the default registry is assumed.
Sourcepub fn repository_name(self, input: impl Into<String>) -> Self
pub fn repository_name(self, input: impl Into<String>) -> Self
The name of the repository that contains the subject image.
Sourcepub fn set_repository_name(self, input: Option<String>) -> Self
pub fn set_repository_name(self, input: Option<String>) -> Self
The name of the repository that contains the subject image.
Sourcepub fn get_repository_name(&self) -> &Option<String>
pub fn get_repository_name(&self) -> &Option<String>
The name of the repository that contains the subject image.
Sourcepub fn subject_id(self, input: SubjectIdentifier) -> Self
pub fn subject_id(self, input: SubjectIdentifier) -> Self
An object containing the image digest of the subject image for which to retrieve associated artifacts.
Sourcepub fn set_subject_id(self, input: Option<SubjectIdentifier>) -> Self
pub fn set_subject_id(self, input: Option<SubjectIdentifier>) -> Self
An object containing the image digest of the subject image for which to retrieve associated artifacts.
Sourcepub fn get_subject_id(&self) -> &Option<SubjectIdentifier>
pub fn get_subject_id(&self) -> &Option<SubjectIdentifier>
An object containing the image digest of the subject image for which to retrieve associated artifacts.
Sourcepub fn filter(self, input: ListImageReferrersFilter) -> Self
pub fn filter(self, input: ListImageReferrersFilter) -> Self
The filter key and value with which to filter your ListImageReferrers results. If no filter is specified, only artifacts with ACTIVE status are returned.
Sourcepub fn set_filter(self, input: Option<ListImageReferrersFilter>) -> Self
pub fn set_filter(self, input: Option<ListImageReferrersFilter>) -> Self
The filter key and value with which to filter your ListImageReferrers results. If no filter is specified, only artifacts with ACTIVE status are returned.
Sourcepub fn get_filter(&self) -> &Option<ListImageReferrersFilter>
pub fn get_filter(&self) -> &Option<ListImageReferrersFilter>
The filter key and value with which to filter your ListImageReferrers results. If no filter is specified, only artifacts with ACTIVE status are returned.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The nextToken value returned from a previous paginated ListImageReferrers request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The nextToken value returned from a previous paginated ListImageReferrers request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The nextToken value returned from a previous paginated ListImageReferrers request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of image referrer results returned by ListImageReferrers in paginated output. When this parameter is used, ListImageReferrers only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListImageReferrers request with the returned nextToken value. This value can be between 1 and 50. If this parameter is not used, then ListImageReferrers returns up to 50 results and a nextToken value, if applicable.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of image referrer results returned by ListImageReferrers in paginated output. When this parameter is used, ListImageReferrers only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListImageReferrers request with the returned nextToken value. This value can be between 1 and 50. If this parameter is not used, then ListImageReferrers returns up to 50 results and a nextToken value, if applicable.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of image referrer results returned by ListImageReferrers in paginated output. When this parameter is used, ListImageReferrers only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListImageReferrers request with the returned nextToken value. This value can be between 1 and 50. If this parameter is not used, then ListImageReferrers returns up to 50 results and a nextToken value, if applicable.
Trait Implementations§
Source§impl Clone for ListImageReferrersFluentBuilder
impl Clone for ListImageReferrersFluentBuilder
Source§fn clone(&self) -> ListImageReferrersFluentBuilder
fn clone(&self) -> ListImageReferrersFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ListImageReferrersFluentBuilder
impl !RefUnwindSafe for ListImageReferrersFluentBuilder
impl Send for ListImageReferrersFluentBuilder
impl Sync for ListImageReferrersFluentBuilder
impl Unpin for ListImageReferrersFluentBuilder
impl !UnwindSafe for ListImageReferrersFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);