#[non_exhaustive]pub struct LaunchTemplateInstanceNetworkInterfaceSpecification {Show 23 fields
pub associate_carrier_ip_address: Option<bool>,
pub associate_public_ip_address: Option<bool>,
pub delete_on_termination: Option<bool>,
pub description: Option<String>,
pub device_index: Option<i32>,
pub groups: Option<Vec<String>>,
pub interface_type: Option<String>,
pub ipv6_address_count: Option<i32>,
pub ipv6_addresses: Option<Vec<InstanceIpv6Address>>,
pub network_interface_id: Option<String>,
pub private_ip_address: Option<String>,
pub private_ip_addresses: Option<Vec<PrivateIpAddressSpecification>>,
pub secondary_private_ip_address_count: Option<i32>,
pub subnet_id: Option<String>,
pub network_card_index: Option<i32>,
pub ipv4_prefixes: Option<Vec<Ipv4PrefixSpecificationResponse>>,
pub ipv4_prefix_count: Option<i32>,
pub ipv6_prefixes: Option<Vec<Ipv6PrefixSpecificationResponse>>,
pub ipv6_prefix_count: Option<i32>,
pub primary_ipv6: Option<bool>,
pub ena_srd_specification: Option<LaunchTemplateEnaSrdSpecification>,
pub connection_tracking_specification: Option<ConnectionTrackingSpecification>,
pub ena_queue_count: Option<i32>,
}Expand description
Describes a network interface.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.associate_carrier_ip_address: Option<bool>Indicates whether to associate a Carrier IP address with eth0 for a new network interface.
Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP address in the Wavelength Developer Guide.
associate_public_ip_address: Option<bool>Indicates whether to associate a public IPv4 address with eth0 for a new network interface.
Amazon Web Services charges for all public IPv4 addresses, including public IPv4 addresses associated with running instances and Elastic IP addresses. For more information, see the Public IPv4 Address tab on the Amazon VPC pricing page.
delete_on_termination: Option<bool>Indicates whether the network interface is deleted when the instance is terminated.
description: Option<String>A description for the network interface.
device_index: Option<i32>The device index for the network interface attachment.
groups: Option<Vec<String>>The IDs of one or more security groups.
interface_type: Option<String>The type of network interface.
ipv6_address_count: Option<i32>The number of IPv6 addresses for the network interface.
ipv6_addresses: Option<Vec<InstanceIpv6Address>>The IPv6 addresses for the network interface.
network_interface_id: Option<String>The ID of the network interface.
private_ip_address: Option<String>The primary private IPv4 address of the network interface.
private_ip_addresses: Option<Vec<PrivateIpAddressSpecification>>One or more private IPv4 addresses.
secondary_private_ip_address_count: Option<i32>The number of secondary private IPv4 addresses for the network interface.
subnet_id: Option<String>The ID of the subnet for the network interface.
network_card_index: Option<i32>The index of the network card.
ipv4_prefixes: Option<Vec<Ipv4PrefixSpecificationResponse>>One or more IPv4 prefixes assigned to the network interface.
ipv4_prefix_count: Option<i32>The number of IPv4 prefixes that Amazon Web Services automatically assigned to the network interface.
ipv6_prefixes: Option<Vec<Ipv6PrefixSpecificationResponse>>One or more IPv6 prefixes assigned to the network interface.
ipv6_prefix_count: Option<i32>The number of IPv6 prefixes that Amazon Web Services automatically assigned to the network interface.
primary_ipv6: Option<bool>The primary IPv6 address of the network interface. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information about primary IPv6 addresses, see RunInstances.
ena_srd_specification: Option<LaunchTemplateEnaSrdSpecification>Contains the ENA Express settings for instances launched from your launch template.
connection_tracking_specification: Option<ConnectionTrackingSpecification>A security group connection tracking specification that enables you to set the timeout for connection tracking on an Elastic network interface. For more information, see Idle connection tracking timeout in the Amazon EC2 User Guide.
ena_queue_count: Option<i32>The number of ENA queues created with the instance.
Implementations§
Source§impl LaunchTemplateInstanceNetworkInterfaceSpecification
impl LaunchTemplateInstanceNetworkInterfaceSpecification
Sourcepub fn associate_carrier_ip_address(&self) -> Option<bool>
pub fn associate_carrier_ip_address(&self) -> Option<bool>
Indicates whether to associate a Carrier IP address with eth0 for a new network interface.
Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP address in the Wavelength Developer Guide.
Sourcepub fn associate_public_ip_address(&self) -> Option<bool>
pub fn associate_public_ip_address(&self) -> Option<bool>
Indicates whether to associate a public IPv4 address with eth0 for a new network interface.
Amazon Web Services charges for all public IPv4 addresses, including public IPv4 addresses associated with running instances and Elastic IP addresses. For more information, see the Public IPv4 Address tab on the Amazon VPC pricing page.
Sourcepub fn delete_on_termination(&self) -> Option<bool>
pub fn delete_on_termination(&self) -> Option<bool>
Indicates whether the network interface is deleted when the instance is terminated.
Sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
A description for the network interface.
Sourcepub fn device_index(&self) -> Option<i32>
pub fn device_index(&self) -> Option<i32>
The device index for the network interface attachment.
Sourcepub fn groups(&self) -> &[String]
pub fn groups(&self) -> &[String]
The IDs of one or more security groups.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .groups.is_none().
Sourcepub fn interface_type(&self) -> Option<&str>
pub fn interface_type(&self) -> Option<&str>
The type of network interface.
Sourcepub fn ipv6_address_count(&self) -> Option<i32>
pub fn ipv6_address_count(&self) -> Option<i32>
The number of IPv6 addresses for the network interface.
Sourcepub fn ipv6_addresses(&self) -> &[InstanceIpv6Address]
pub fn ipv6_addresses(&self) -> &[InstanceIpv6Address]
The IPv6 addresses for the network interface.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .ipv6_addresses.is_none().
Sourcepub fn network_interface_id(&self) -> Option<&str>
pub fn network_interface_id(&self) -> Option<&str>
The ID of the network interface.
Sourcepub fn private_ip_address(&self) -> Option<&str>
pub fn private_ip_address(&self) -> Option<&str>
The primary private IPv4 address of the network interface.
Sourcepub fn private_ip_addresses(&self) -> &[PrivateIpAddressSpecification]
pub fn private_ip_addresses(&self) -> &[PrivateIpAddressSpecification]
One or more private IPv4 addresses.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .private_ip_addresses.is_none().
Sourcepub fn secondary_private_ip_address_count(&self) -> Option<i32>
pub fn secondary_private_ip_address_count(&self) -> Option<i32>
The number of secondary private IPv4 addresses for the network interface.
Sourcepub fn network_card_index(&self) -> Option<i32>
pub fn network_card_index(&self) -> Option<i32>
The index of the network card.
Sourcepub fn ipv4_prefixes(&self) -> &[Ipv4PrefixSpecificationResponse]
pub fn ipv4_prefixes(&self) -> &[Ipv4PrefixSpecificationResponse]
One or more IPv4 prefixes assigned to the network interface.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .ipv4_prefixes.is_none().
Sourcepub fn ipv4_prefix_count(&self) -> Option<i32>
pub fn ipv4_prefix_count(&self) -> Option<i32>
The number of IPv4 prefixes that Amazon Web Services automatically assigned to the network interface.
Sourcepub fn ipv6_prefixes(&self) -> &[Ipv6PrefixSpecificationResponse]
pub fn ipv6_prefixes(&self) -> &[Ipv6PrefixSpecificationResponse]
One or more IPv6 prefixes assigned to the network interface.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .ipv6_prefixes.is_none().
Sourcepub fn ipv6_prefix_count(&self) -> Option<i32>
pub fn ipv6_prefix_count(&self) -> Option<i32>
The number of IPv6 prefixes that Amazon Web Services automatically assigned to the network interface.
Sourcepub fn primary_ipv6(&self) -> Option<bool>
pub fn primary_ipv6(&self) -> Option<bool>
The primary IPv6 address of the network interface. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information about primary IPv6 addresses, see RunInstances.
Sourcepub fn ena_srd_specification(
&self,
) -> Option<&LaunchTemplateEnaSrdSpecification>
pub fn ena_srd_specification( &self, ) -> Option<&LaunchTemplateEnaSrdSpecification>
Contains the ENA Express settings for instances launched from your launch template.
Sourcepub fn connection_tracking_specification(
&self,
) -> Option<&ConnectionTrackingSpecification>
pub fn connection_tracking_specification( &self, ) -> Option<&ConnectionTrackingSpecification>
A security group connection tracking specification that enables you to set the timeout for connection tracking on an Elastic network interface. For more information, see Idle connection tracking timeout in the Amazon EC2 User Guide.
Sourcepub fn ena_queue_count(&self) -> Option<i32>
pub fn ena_queue_count(&self) -> Option<i32>
The number of ENA queues created with the instance.
Source§impl LaunchTemplateInstanceNetworkInterfaceSpecification
impl LaunchTemplateInstanceNetworkInterfaceSpecification
Sourcepub fn builder() -> LaunchTemplateInstanceNetworkInterfaceSpecificationBuilder
pub fn builder() -> LaunchTemplateInstanceNetworkInterfaceSpecificationBuilder
Creates a new builder-style object to manufacture LaunchTemplateInstanceNetworkInterfaceSpecification.
Trait Implementations§
Source§impl Clone for LaunchTemplateInstanceNetworkInterfaceSpecification
impl Clone for LaunchTemplateInstanceNetworkInterfaceSpecification
Source§fn clone(&self) -> LaunchTemplateInstanceNetworkInterfaceSpecification
fn clone(&self) -> LaunchTemplateInstanceNetworkInterfaceSpecification
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl PartialEq for LaunchTemplateInstanceNetworkInterfaceSpecification
impl PartialEq for LaunchTemplateInstanceNetworkInterfaceSpecification
Source§fn eq(
&self,
other: &LaunchTemplateInstanceNetworkInterfaceSpecification,
) -> bool
fn eq( &self, other: &LaunchTemplateInstanceNetworkInterfaceSpecification, ) -> bool
self and other values to be equal, and is used by ==.impl StructuralPartialEq for LaunchTemplateInstanceNetworkInterfaceSpecification
Auto Trait Implementations§
impl Freeze for LaunchTemplateInstanceNetworkInterfaceSpecification
impl RefUnwindSafe for LaunchTemplateInstanceNetworkInterfaceSpecification
impl Send for LaunchTemplateInstanceNetworkInterfaceSpecification
impl Sync for LaunchTemplateInstanceNetworkInterfaceSpecification
impl Unpin for LaunchTemplateInstanceNetworkInterfaceSpecification
impl UnwindSafe for LaunchTemplateInstanceNetworkInterfaceSpecification
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);