#[non_exhaustive]pub struct IpamScope {
pub owner_id: Option<String>,
pub ipam_scope_id: Option<String>,
pub ipam_scope_arn: Option<String>,
pub ipam_arn: Option<String>,
pub ipam_region: Option<String>,
pub ipam_scope_type: Option<IpamScopeType>,
pub is_default: Option<bool>,
pub description: Option<String>,
pub pool_count: Option<i32>,
pub state: Option<IpamScopeState>,
pub tags: Option<Vec<Tag>>,
}Expand description
In IPAM, a scope is the highest-level container within IPAM. An IPAM contains two default scopes. Each scope represents the IP space for a single network. The private scope is intended for all private IP address space. The public scope is intended for all public IP address space. Scopes enable you to reuse IP addresses across multiple unconnected networks without causing IP address overlap or conflict.
For more information, see How IPAM works in the Amazon VPC IPAM User Guide.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.owner_id: Option<String>The Amazon Web Services account ID of the owner of the scope.
ipam_scope_id: Option<String>The ID of the scope.
ipam_scope_arn: Option<String>The Amazon Resource Name (ARN) of the scope.
ipam_arn: Option<String>The ARN of the IPAM.
ipam_region: Option<String>The Amazon Web Services Region of the IPAM scope.
ipam_scope_type: Option<IpamScopeType>The type of the scope.
is_default: Option<bool>Defines if the scope is the default scope or not.
description: Option<String>The description of the scope.
pool_count: Option<i32>The number of pools in the scope.
state: Option<IpamScopeState>The state of the IPAM scope.
The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
Implementations§
Source§impl IpamScope
impl IpamScope
Sourcepub fn owner_id(&self) -> Option<&str>
pub fn owner_id(&self) -> Option<&str>
The Amazon Web Services account ID of the owner of the scope.
Sourcepub fn ipam_scope_id(&self) -> Option<&str>
pub fn ipam_scope_id(&self) -> Option<&str>
The ID of the scope.
Sourcepub fn ipam_scope_arn(&self) -> Option<&str>
pub fn ipam_scope_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the scope.
Sourcepub fn ipam_region(&self) -> Option<&str>
pub fn ipam_region(&self) -> Option<&str>
The Amazon Web Services Region of the IPAM scope.
Sourcepub fn ipam_scope_type(&self) -> Option<&IpamScopeType>
pub fn ipam_scope_type(&self) -> Option<&IpamScopeType>
The type of the scope.
Sourcepub fn is_default(&self) -> Option<bool>
pub fn is_default(&self) -> Option<bool>
Defines if the scope is the default scope or not.
Sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
The description of the scope.
Sourcepub fn pool_count(&self) -> Option<i32>
pub fn pool_count(&self) -> Option<i32>
The number of pools in the scope.
Sourcepub fn state(&self) -> Option<&IpamScopeState>
pub fn state(&self) -> Option<&IpamScopeState>
The state of the IPAM scope.
The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().
Trait Implementations§
impl StructuralPartialEq for IpamScope
Auto Trait Implementations§
impl Freeze for IpamScope
impl RefUnwindSafe for IpamScope
impl Send for IpamScope
impl Sync for IpamScope
impl Unpin for IpamScope
impl UnwindSafe for IpamScope
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);