pub struct ModifyVpnConnectionFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ModifyVpnConnection.
Modifies the customer gateway or the target gateway of an Amazon Web Services Site-to-Site VPN connection. To modify the target gateway, the following migration options are available:
-
An existing virtual private gateway to a new virtual private gateway
-
An existing virtual private gateway to a transit gateway
-
An existing transit gateway to a new transit gateway
-
An existing transit gateway to a virtual private gateway
Before you perform the migration to the new gateway, you must configure the new gateway. Use CreateVpnGateway to create a virtual private gateway, or CreateTransitGateway to create a transit gateway.
This step is required when you migrate from a virtual private gateway with static routes to a transit gateway.
You must delete the static routes before you migrate to the new gateway.
Keep a copy of the static route before you delete it. You will need to add back these routes to the transit gateway after the VPN connection migration is complete.
After you migrate to the new gateway, you might need to modify your VPC route table. Use CreateRoute and DeleteRoute to make the changes described in Update VPC route tables in the Amazon Web Services Site-to-Site VPN User Guide.
When the new gateway is a transit gateway, modify the transit gateway route table to allow traffic between the VPC and the Amazon Web Services Site-to-Site VPN connection. Use CreateTransitGatewayRoute to add the routes.
If you deleted VPN static routes, you must add the static routes to the transit gateway route table.
After you perform this operation, the VPN endpoint's IP addresses on the Amazon Web Services side and the tunnel options remain intact. Your Amazon Web Services Site-to-Site VPN connection will be temporarily unavailable for a brief period while we provision the new endpoints.
Implementations§
Source§impl ModifyVpnConnectionFluentBuilder
impl ModifyVpnConnectionFluentBuilder
Sourcepub fn as_input(&self) -> &ModifyVpnConnectionInputBuilder
pub fn as_input(&self) -> &ModifyVpnConnectionInputBuilder
Access the ModifyVpnConnection as a reference.
Sourcepub async fn send(
self,
) -> Result<ModifyVpnConnectionOutput, SdkError<ModifyVpnConnectionError, HttpResponse>>
pub async fn send( self, ) -> Result<ModifyVpnConnectionOutput, SdkError<ModifyVpnConnectionError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ModifyVpnConnectionOutput, ModifyVpnConnectionError, Self>
pub fn customize( self, ) -> CustomizableOperation<ModifyVpnConnectionOutput, ModifyVpnConnectionError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn vpn_connection_id(self, input: impl Into<String>) -> Self
pub fn vpn_connection_id(self, input: impl Into<String>) -> Self
The ID of the VPN connection.
Sourcepub fn set_vpn_connection_id(self, input: Option<String>) -> Self
pub fn set_vpn_connection_id(self, input: Option<String>) -> Self
The ID of the VPN connection.
Sourcepub fn get_vpn_connection_id(&self) -> &Option<String>
pub fn get_vpn_connection_id(&self) -> &Option<String>
The ID of the VPN connection.
Sourcepub fn transit_gateway_id(self, input: impl Into<String>) -> Self
pub fn transit_gateway_id(self, input: impl Into<String>) -> Self
The ID of the transit gateway.
Sourcepub fn set_transit_gateway_id(self, input: Option<String>) -> Self
pub fn set_transit_gateway_id(self, input: Option<String>) -> Self
The ID of the transit gateway.
Sourcepub fn get_transit_gateway_id(&self) -> &Option<String>
pub fn get_transit_gateway_id(&self) -> &Option<String>
The ID of the transit gateway.
Sourcepub fn customer_gateway_id(self, input: impl Into<String>) -> Self
pub fn customer_gateway_id(self, input: impl Into<String>) -> Self
The ID of the customer gateway at your end of the VPN connection.
Sourcepub fn set_customer_gateway_id(self, input: Option<String>) -> Self
pub fn set_customer_gateway_id(self, input: Option<String>) -> Self
The ID of the customer gateway at your end of the VPN connection.
Sourcepub fn get_customer_gateway_id(&self) -> &Option<String>
pub fn get_customer_gateway_id(&self) -> &Option<String>
The ID of the customer gateway at your end of the VPN connection.
Sourcepub fn vpn_gateway_id(self, input: impl Into<String>) -> Self
pub fn vpn_gateway_id(self, input: impl Into<String>) -> Self
The ID of the virtual private gateway at the Amazon Web Services side of the VPN connection.
Sourcepub fn set_vpn_gateway_id(self, input: Option<String>) -> Self
pub fn set_vpn_gateway_id(self, input: Option<String>) -> Self
The ID of the virtual private gateway at the Amazon Web Services side of the VPN connection.
Sourcepub fn get_vpn_gateway_id(&self) -> &Option<String>
pub fn get_vpn_gateway_id(&self) -> &Option<String>
The ID of the virtual private gateway at the Amazon Web Services side of the VPN connection.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Trait Implementations§
Source§impl Clone for ModifyVpnConnectionFluentBuilder
impl Clone for ModifyVpnConnectionFluentBuilder
Source§fn clone(&self) -> ModifyVpnConnectionFluentBuilder
fn clone(&self) -> ModifyVpnConnectionFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ModifyVpnConnectionFluentBuilder
impl !RefUnwindSafe for ModifyVpnConnectionFluentBuilder
impl Send for ModifyVpnConnectionFluentBuilder
impl Sync for ModifyVpnConnectionFluentBuilder
impl Unpin for ModifyVpnConnectionFluentBuilder
impl !UnwindSafe for ModifyVpnConnectionFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);