pub struct ModifyVpcPeeringConnectionOptionsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ModifyVpcPeeringConnectionOptions.
Modifies the VPC peering connection options on one side of a VPC peering connection.
If the peered VPCs are in the same Amazon Web Services account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer VPC. This option is not available if the peered VPCs are in different Amazon Web Services accounts or different Regions. For peered VPCs in different Amazon Web Services accounts, each Amazon Web Services account owner must initiate a separate request to modify the peering connection options. For inter-region peering connections, you must use the Region for the requester VPC to modify the requester VPC peering options and the Region for the accepter VPC to modify the accepter VPC peering options. To verify which VPCs are the accepter and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.
Implementations§
Source§impl ModifyVpcPeeringConnectionOptionsFluentBuilder
impl ModifyVpcPeeringConnectionOptionsFluentBuilder
Sourcepub fn as_input(&self) -> &ModifyVpcPeeringConnectionOptionsInputBuilder
pub fn as_input(&self) -> &ModifyVpcPeeringConnectionOptionsInputBuilder
Access the ModifyVpcPeeringConnectionOptions as a reference.
Sourcepub async fn send(
self,
) -> Result<ModifyVpcPeeringConnectionOptionsOutput, SdkError<ModifyVpcPeeringConnectionOptionsError, HttpResponse>>
pub async fn send( self, ) -> Result<ModifyVpcPeeringConnectionOptionsOutput, SdkError<ModifyVpcPeeringConnectionOptionsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ModifyVpcPeeringConnectionOptionsOutput, ModifyVpcPeeringConnectionOptionsError, Self>
pub fn customize( self, ) -> CustomizableOperation<ModifyVpcPeeringConnectionOptionsOutput, ModifyVpcPeeringConnectionOptionsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn accepter_peering_connection_options(
self,
input: PeeringConnectionOptionsRequest,
) -> Self
pub fn accepter_peering_connection_options( self, input: PeeringConnectionOptionsRequest, ) -> Self
The VPC peering connection options for the accepter VPC.
Sourcepub fn set_accepter_peering_connection_options(
self,
input: Option<PeeringConnectionOptionsRequest>,
) -> Self
pub fn set_accepter_peering_connection_options( self, input: Option<PeeringConnectionOptionsRequest>, ) -> Self
The VPC peering connection options for the accepter VPC.
Sourcepub fn get_accepter_peering_connection_options(
&self,
) -> &Option<PeeringConnectionOptionsRequest>
pub fn get_accepter_peering_connection_options( &self, ) -> &Option<PeeringConnectionOptionsRequest>
The VPC peering connection options for the accepter VPC.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn requester_peering_connection_options(
self,
input: PeeringConnectionOptionsRequest,
) -> Self
pub fn requester_peering_connection_options( self, input: PeeringConnectionOptionsRequest, ) -> Self
The VPC peering connection options for the requester VPC.
Sourcepub fn set_requester_peering_connection_options(
self,
input: Option<PeeringConnectionOptionsRequest>,
) -> Self
pub fn set_requester_peering_connection_options( self, input: Option<PeeringConnectionOptionsRequest>, ) -> Self
The VPC peering connection options for the requester VPC.
Sourcepub fn get_requester_peering_connection_options(
&self,
) -> &Option<PeeringConnectionOptionsRequest>
pub fn get_requester_peering_connection_options( &self, ) -> &Option<PeeringConnectionOptionsRequest>
The VPC peering connection options for the requester VPC.
Sourcepub fn vpc_peering_connection_id(self, input: impl Into<String>) -> Self
pub fn vpc_peering_connection_id(self, input: impl Into<String>) -> Self
The ID of the VPC peering connection.
Sourcepub fn set_vpc_peering_connection_id(self, input: Option<String>) -> Self
pub fn set_vpc_peering_connection_id(self, input: Option<String>) -> Self
The ID of the VPC peering connection.
Sourcepub fn get_vpc_peering_connection_id(&self) -> &Option<String>
pub fn get_vpc_peering_connection_id(&self) -> &Option<String>
The ID of the VPC peering connection.
Trait Implementations§
Source§impl Clone for ModifyVpcPeeringConnectionOptionsFluentBuilder
impl Clone for ModifyVpcPeeringConnectionOptionsFluentBuilder
Source§fn clone(&self) -> ModifyVpcPeeringConnectionOptionsFluentBuilder
fn clone(&self) -> ModifyVpcPeeringConnectionOptionsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ModifyVpcPeeringConnectionOptionsFluentBuilder
impl !RefUnwindSafe for ModifyVpcPeeringConnectionOptionsFluentBuilder
impl Send for ModifyVpcPeeringConnectionOptionsFluentBuilder
impl Sync for ModifyVpcPeeringConnectionOptionsFluentBuilder
impl Unpin for ModifyVpcPeeringConnectionOptionsFluentBuilder
impl !UnwindSafe for ModifyVpcPeeringConnectionOptionsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);